journal article·2012-11

Characterization of the Surface Film Formed on Molten AZ91D Magnesium Alloy in Atmospheres Containing SO2

Xian-Fei Wang, Shou-Mei Xiong

Publisher page

Abstract

The surface film formed on molten AZ91D magnesium alloy in an atmosphere containing SO2 was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Auger electron spectroscopy (AES), and X-ray photoelectron spectroscopy (XPS). The surface film primarily contained MgO and MgS and had a network structure. MgS increased the Pilling–Bedworth ratio of the film and enhanced its protective capability. The films with a few pores at the surface consisted of two layers with an outer MgO layer and an inner layer of MgO and MgS. The film without pores at the surface also contained MgS and small amounts of MgSO4 in the outer layer. Increasing the SO2 content in the atmosphere promoted film growth and the formation of the protective film was prevented with the increased temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. X.Q. Zeng, Q.D. Wang, Y.Z. Lü, W.J. Ding, Y.P. Zhu, C.Q. Zhai, C. Lu, and X.Q. Xu: Mater. Sci. Eng. A, 2001, vol. A301, pp. 154–61.10.1016/S0921-5093(00)01798-6 ↗
2. H. Jafari and M.H. Idris: Corros. Sci., 2011, vol. 53, pp. 655–63.10.1016/j.corsci.2010.10.012 ↗
3. A. Mirak, C.J. Davidson, and J.A. Taylor: Corros. Sci., 2010, vol. 52, pp. 1992–2000.10.1016/j.corsci.2010.02.003 ↗
4. S.L. Couling, F.C. Bennett, and T.E. Leontis: Light Met. Age, 1977, no. 1, pp. 12–21.
5. S.P. Cashion: Ph.D. Thesis, University of Queensland, Queensland, Australia, 1998, pp. 145–47.
6. G. Pettersen, E. Øvrelid, and G. Tranell: Mater. Sci. Eng. A, 2002, vol. A332, pp. 285–94.10.1016/S0921-5093(01)01750-6 ↗
7. K. Aarstad: Magnesium Technology 2003, TMS, Warrendale, PA, 2003, pp. 35–38.
8. W. Ha and Y.J. Kim: J. Alloy. Compd., 2006, vol. 422, pp. 208–13.10.1016/j.jallcom.2005.12.003 ↗
9. J.F. Moulder, W.F. Stickle, P.E. Sobol, and K.D. Bomben: Handbook of X-ray Photoelectron Spectroscopy, Perkin-Elmer, Eden Prairie, MN, 1992, pp. 32–35.
10. S. Ardizzone, C.L. Bianchi, M. Fadoni, and B. Vercelli: Appl. Surf. Sci., 1997, vol. 119, pp. 253–59.10.1016/S0169-4332(97)00180-3 ↗
11. M. Liu, S. Zanna, H. Ardelean, I. Frateur, P. Schmutz, G. Song, A. Atrens, and P. Marcus: Corros. Sci., 2009, vol. 51, pp. 1115–27.10.1016/j.corsci.2009.02.017 ↗
12. M. Liu, D.S. Shih, C. Parish, and A. Atrens: Corros. Sci., 2012, vol. 54, pp. 139–42.10.1016/j.corsci.2011.09.004 ↗
13. K. Aarstad: Ph.D. Thesis, Norwegian University of Science and Technology, Trondheim, Norway, 2004, p. 5.
14. S. Mrowec and K. Przybylski: Oxid. Met., 1985, vol. 23, pp. 107–22.10.1007/BF00659899 ↗
15. B. Haftlan and P. Kofstad: Corros. Sci., 1983, vol. 23, pp. 1333–52.10.1016/0010-938X(83)90082-3 ↗
16. J. Barin, and O. Knacke: Thermochemical Properties of Inorganic Substances, Springer Verlag, Berlin, 1973, Suppl. 1977, pp. 68–75.10.1007/978-3-662-02293-1 ↗