Thermomechanical response of a powder metallurgy Ti−6Al−4V alloy modified with 2.9 Pct Boron
Source abstract
Abstract
The thermomechanical response of Ti−6A1−4V modified with 2.9 pct B produced by a blended powder metallurgy route was studied with isothermal constant strain-rate hot compression tests in the temperature range 850°C to 1200°C and strain rate range 10−3 to 10s−1. Detailed analyses of the flow stress data were conducted to identify various microstructural deformation and damage mechanisms during hot working by applying available materials modeling techniques. In the α+β phase field, cavitation at the matrix/TiB interfaces and TiB particle fracture occurs at low strain rates (<10−1 s−1), while adiabatic shear banding also occurs at high strain rates. At low strain rates, the β phase deforms superplastically due to the stabilization of a fine grain size by the TiB particles. Grain boundary and matrix/TiB interface sliding with simultaneous diffusional accommodation are observed to contribute to the β superplasticity. The deformation behavior at high strain rates in the β-phase field is similar to that of the α+β phase field, with microstructural manifestations of extensive cavitation at the matrix/TiB interfaces and TiB particle fracture.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. S. Mall, T. Fecke, and M.A. Foringer: in Titanium Matrix Composites: Mechanical Behavior, S. Mall and T. Nicholas, eds., Technomic Pub. Co., Lancaster, PA, 1998, pp. 1–22.
2. D.B. Miracle: in ASM Handbook: Composites, D.B. Miracle and S.L. Donaldson, eds., ASM INTERNATIONAL, Materials Park, OH, 2001, vol. 21, pp. 1043–49.
3. S.R. Gunawardena, S. Jansson, and F.A. Leckie: Acta Metall. Mater., 1993, vol. 41, pp. 3147–56.10.1016/0956-7151(93)90045-T ↗
4. T.M.T. Godfrey, P.S. Goodwin, and C.M. Ward-Close: Adv. Eng. Mater., 2000, vol. 2, pp. 85–91.10.1002/(SICI)1527-2648(200003)2:3<85::AID-ADEM85>3.0.CO;2-U ↗
5. K.S. Ravichandran, and D.B. Miracle: J. Met., 2004, vol. 56, (5), p. 32
6. S. Ranganath: J. Mater. Sci., 1997, vol. 32, pp. 1–16
7. T. Saito, T. Furuta, and T. Yamaguchi: Proc. 1994 MRS Fall Meeting, F.H. Froes and J. Storer, eds., MRS, Rosemont, IL, 1994, pp. 33–44.
8. R.J. Lederich, W.O. Soboyejo, and T.S. Srivatsan: J. Met., 1994, vol. 46, pp. 68–71.
9. C.F. Yolton, and J.H. Moll: in Titanium '95 Science and Technology, P.A. Blenkinsop, W.J. Evans, and H.N. Flower, eds., IOM, London, 1996, vol. III, pp. 2755–62.
10. S. Ranganath, and R.S. Mishra: Acta Mater., 1996, vol. 44, pp. 927–35.10.1016/1359-6454(95)00242-1 ↗
11. T.M.T. Godfrey, P.S. Goodwin, and C.M. Ward-Close: Mater. Sci. Technol., 2000, vol. 16, pp. 753–58.10.1179/026708300101507145 ↗
12. R. Banerjee, P.C. Collins, A. Genc, and H.L. Fraser: Mater. Sci. Eng. A, 2003, vol. A358, pp. 343–49.10.1016/S0921-5093(03)00299-5 ↗
13. T. Saito: Adv. Performance Mater., 1995, vol. 2, pp. 121–44.10.1007/BF00711267 ↗
14. R.S. Mishra, T.R. Bieler, and A.K. Mukherjee: Acta Mater., 1997, vol. 45, pp. 561–68.10.1016/S1359-6454(96)00194-2 ↗
15. B.V.R. Bhat, Y.R. Mahajan, and Y.V.R.K. Prasad: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 629–39.10.1007/s11661-000-0006-5 ↗
16. Hot Working Guide: A Compendium of Processing Maps, Y.V.R.K. Prasad and S. Sasidhara, eds, ASM INTERNATIONAL, Materials Park, OH, 1997.
17. S. Tamirisakandala, B.V. Vedam, and R.B. Bhat: J. Mater. Eng. Performance, 2003, vol. 12, pp. 661–73.10.1361/105994903322692466 ↗
18. Phase Diagrams of Binary Titanium Alloys, J. Murray, ed., ASM, Metals Park, OH, 1987, p. 33.
19. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill, New York, NY, 1986, pp. 73–76.
20. J.J. Jonas, C.M. Sellars, and W.J. Tegart: Metall. Rev., 1969, vol. 14, pp. 1–24.10.1179/095066069790138056 ↗
21. Y.V.R.K. Prasad, and T. Seshacharyulu: Int. Mater. Rev., 1998, vol. 43, pp. 243–58.10.1179/imr.1998.43.6.243 ↗
22. M.F. Ashby: Phil. Mag., 1966, vol. 14, pp. 1157–65.10.1080/14786436608224282 ↗
23. M.W. Mahoney: in Materials Properties Handbook: Titanium Alloys, R. Boyer, G. Welsch, and E. Collings eds, ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 1101–09.
24. R.C. Koeller, and R. Raj: Acta. Metall., 1978, vol. 26, pp. 1551–58.10.1016/0001-6160(78)90064-0 ↗
25. H.J. Frost, and M.F. Ashby: Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, 1st ed., Pergamon Press, Oxford, NY, 1982, pp. 43–52.
26. M.E. Hyman, C. McCullough, J.J. Valencia, C.G. Levi, and R. Mehrabian: Metall. Trans. A, 1989, vol. 20A. pp. 1847–59.10.1007/BF02663215 ↗
27. N.E. De Reca, and C.M. Libanati: Acta Metall., 1968, vol. 16, pp. 1297–305.10.1016/0001-6160(68)90010-2 ↗
28. C. Schuh, and D.C. Dunand: Int. J. Plasticity, 2001, vol. 17, pp. 317–40.10.1016/S0749-6419(00)00038-3 ↗
29. B.V.R. Bhat, Y.R. Mahajan, H.M. Roshan, and Y.V.R.K. Prasad: Mater. Sci. Eng., 1994, vol. A189, pp. 137–45.10.1016/0921-5093(94)90409-X ↗
30. A. Arieli, and A.K. Mukherjee: Metall. Trans. A., 1982, vol. 13A, pp. 717–32.10.1007/BF02642385 ↗
31. R. Kaibyshev, I. Kazakulov, D. Gromov, F. Musin, D.R. Lesuer, and T.G. Nieh: Scripta Mater, 2001, vol. 44, pp. 2411–17.10.1016/S1359-6462(01)00930-7 ↗
32. A.K. Mukherjee, J.E. Bird, and J.E. Dorn: Trans. Am. Soc. Met., 1969, vol. 62, pp. 155–79.
33. S. Liao, and J. Duffy: J. Mech. Phys. Solids, 1998, vol. 46. pp. 2201–31.10.1016/S0022-5096(98)00044-1 ↗