journal article·2014-09

Effect of Impurity Tin on the Creep Properties of a P91 Heat-Resistant Steel

S.-H. Song, Y.-W. Xu, H.-F. Yang

Publisher page

Abstract

The creep properties of P91 steel specimens undoped and doped with 0.058 wt pct tin, which was normalized from 1328 K (1055 °C) and tempered at 1033 K (760 °C), were examined under different engineering stresses (150 to 210 MPa) and temperatures [873 K to 923 K (600 °C to 650 °C)]. The creep behavior followed the temperature-compensated power law and Monkman–Grant equations. In the temperature-compensated power law equation, the apparent activation energy and stress exponent for creep were approximately 541 kJ/mol and 12 for the undoped steel and 527 kJ/mol and 11 for the Sn-doped one, respectively. In the Monkman–Grant relation, the values of constants m and C were around 1.062 and 0.0672 for the undoped steel, and 1.012 and 0.0650 for the Sn-doped one, respectively. The 100 MPa stress creep lifetime at 873 K (600 °C) was estimated as 100641 hours for the undoped steel and 35290 hours for the Sn-doped steel, respectively. These indicated that Sn substantially deteriorated the creep properties of the steel. It was found that grain or subgrain boundary segregation of Sn could promote the nucleation of cavities or microcracks, thereby leading to the deterioration of the steel creep properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. R.L. Klueh, K. Ehrlich, and F. Abe: J. Nucl. Mater., 1992, vol. 191, pp. 116–24.
2. R.L. Klueh: Int. Mater. Rev., 2005, vol. 50, pp. 287–310.10.1179/174328005X41140 ↗
3. F. Abe, T. Horiuchi, M. Taneike, and K. Sawada: Mater. Sci. Eng. A, 2004, vol. 378, pp. 299–303.10.1016/j.msea.2003.11.073 ↗
4. F. Abe: Mater. Sci. Eng. A, 2004, vol. 387, pp. 565–69.10.1016/j.msea.2004.01.057 ↗
5. K. Maruyama, K. Sawada, and J.I. Koike: ISIJ Int., 2001, vol. 41, pp. 641–53.10.2355/isijinternational.41.641 ↗
6. P.J. Ennis, A. Zielinska-Lipiec, O. Wachter, and A. Czyrska-filemonowicz: Acta Metall., 1997, vol. 45, pp. 4901–07.
7. M.E. Kassner and T.A. Hayes: Int. J. Plast., 2003, vol. 19, pp. 1715–48.10.1016/S0749-6419(02)00111-0 ↗
8. M.H. Yoo and H. Trinkaus: Metall. Trans. A, 1983, vol. 14A, pp. 547–61.10.1007/BF02643772 ↗
9. E.D. Hondros and P.J. Henderson: Metall. Trans. A, 1983, vol. 14A, pp. 521–30.10.1007/BF02643770 ↗
10. W.D. Nix, K.S. Yu, and J.S. Wang: Metall. Mater. Trans. A, 1983, vol. 14, pp. 563–70.10.1007/BF02643773 ↗
11. E.P. George, R.L. Kennedy, and D.P. Pope: Phys. Status Solidi A, 1998, vol. 167, pp. 313–33.10.1002/(SICI)1521-396X(199806)167:2<313::AID-PSSA313>3.0.CO;2-5 ↗
12. C.L. White, J.H. Schneibel, and R.A. Padgett: Metall. Trans. A, 1983, vol. 14A, pp. 595–610.10.1007/BF02643776 ↗
13. L.M. Lundin, M. Hättestrand, and H.O. Andrén: in PARSONS 2000 Advanced Materials for 21st Century Turbines and Power Plant, A. Strang et al. eds., IOM Communication, London, 2000, pp. 603–17.
14. M.F. Ashby and D.R.H. Jones: Engineering Materials 1: An Introduction to their Properties and Applications, 2nd ed., Butterworth-Heinemann, Oxford, 1996.
15. F.C. Monkman and N.J. Grant: Proc. Am. Soc. Test. Mater., 1956, vol. 56, pp. 593–620.
16. ASTM Specifications E8, E21 and E139, ASTM International, West Conshohocken, PA 19428-2959, USA, 1994.
17. P.J. Ennis and A. Czyrska-filemonowicz: Sadhana, 2003, vol. 28, pp. 709–730.10.1007/BF02706455 ↗
18. S.H. Song and L.Q. Weng: J. Mater. Sci. Technol., 2005, vol. 21, pp. 445–50.10.1179/174328405X27025 ↗
19. X.M. Chen, S.H. Song, L.Q. Weng, and S.J. Liu: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7663–68.10.1016/j.msea.2011.06.084 ↗
20. M.E. Kassner and M.T. Perez-Prado MT: Prog. Mater. Sci., 2000, vol. 45, pp. 1–102.10.1016/S0079-6425(99)00006-7 ↗
21. S. Latha, M.D. Mathewa, P. Parameswaran, K. BhanuSankaraRao, and S.L. Mannan: Int. J. Press. Vessels Pip., 2008, vol. 85. pp. 866–70.10.1016/j.ijpvp.2008.07.002 ↗
22. S. Spigarelli, E. Cerri, P. Bianchi, and E. Evangelista: Mater. Sci. Technol., 1999, vol. 15, pp. 1433–40.10.1179/026708399101505428 ↗
23. H.K.D.H. Bhadeshia: ISIJ Int., 2001, vol. 41, pp. 626–40.10.2355/isijinternational.41.626 ↗
24. Y. Wang, K.H. Mayer, A. Scholz, C. Berger, H. Chilukuru, K. Durst, and W. Blum: Mater. Sci. Eng. A, 2009, vol. 510, pp. 180–84.10.1016/j.msea.2008.04.116 ↗
25. P.N. Ernst, P.J. Uggowitzer, and M.O. Speidel: J. Mater. Sci., 1986, vol. 5, pp. 835–39.
26. B. Wilshire, T.D. Lieu: Mater. Sci. Eng. A, 2004, vol. 386, pp. 81–90.10.1016/j.msea.2004.07.047 ↗
27. M.F. Ashby and B.F. Dyson: in: Advances in Fracture Research, S.R. Valluri, ed., Pergamon Press, Oxford, vol. 1, 1986, pp. 3–30.
28. F.A. Leckie and D.R. Hayhurst: Acta. Metall., 1977, vol. 25, pp. 1059–70.10.1016/0001-6160(77)90135-3 ↗
29. A. Yousefiani, F.A. Mohamed, and J.C. Earthman: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2807-21.10.1007/BF02830340 ↗
30. Y.S. Lee, J. Yu: Metall. Mater. Trans. A, 1999, vol. 30, pp. 2331–39.10.1007/s11661-999-0242-2 ↗
31. J. Wu, S.H. Song, L.Q. Weng, T.H. Xi, and Z.X. Yuan: Mater. Charact., 2008, vol. 59, pp. 261–65.10.1016/j.matchar.2007.01.003 ↗
32. S.H. Song, J. Wu, L.Q. Weng, and Z.X. Yuan: Mater. Sci. Eng. A, 2008, vol. 497, pp. 524–27.10.1016/j.msea.2008.07.036 ↗
33. M.P. Seah: Acta Metall., 1980, vol. 28, pp. 955–62.10.1016/0001-6160(80)90112-1 ↗
34. H. Matsuoka, K. Osawa, M. Ono, and M. Ohmura: ISIJ Int., 1997, vol. 37, pp. 255–62.10.2355/isijinternational.37.255 ↗
35. S.H. Song, Z.X. Yuan, J. Jia, A.M. Guo, and D.D. Shen: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1611–16.10.1007/s11661-003-0306-7 ↗
36. S.H. Song, J. Wu, Z.X. Yuan, L.Q. Weng, and T.H. Xi: Mater. Sci. Eng. A, 2008, vol. 486, pp. 675–79.10.1016/j.msea.2007.09.015 ↗
37. S.H. Song, J. Wu, L.Q. Weng, and S.J. Liu: Mater. Lett., 2010, vol. 64, pp. 849–51.10.1016/j.matlet.2010.01.038 ↗