journal article·2002-01

Density gradients formed during compaction of bronze powders: the origins of part-to-part variation

Wenxia Li, Jin Nam, John J. Lannutti

Publisher page

Abstract

The existence of density gradients in metal compacts has been recognized for over 50 years. However, previous attempts to quantify these gradients were limited by the difficulty of the technique involved and the ambiguity of the results. In this article, the utility of X-ray computer tomography (XRCT) in providing quantitative characterization of part-to-part variation in bronze compacts is demonstrated. Compaction behavior was also contrasted with previous work on porous spray-dried agglomerates. The density distribution patterns are qualitatively and quantitatively dissimilar. Different mechanisms appear to dominate the transmission of stress through assemblies of solid metal particles vs that of “softer,” spray-dried agglomerates. In addition, XRCT reveals that the structures found in the socalled “loose” powder (or “fill”) prior to compaction are both more complex than previously believed and capable of influencing final part-to-part variation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Granular flow and fluidized beds · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Randall M. German: Sintering Theory and Practice, John Wiley & Sons, Inc., New York, NY, 1996, pp. 23–60.
2. T.J. McCable, L.V. Godby, and J.R.L. Trasorras: Adv. Powder Metall. Part Mater., 1994, vol. 2, pp. 175–83.
3. A. Casagranda, E.S. Bono, and T.G. Freidhoff: Adv. Powder Metall. Part Mater., 1997, vol. 3, pp. 20/21–20/34.
4. A. Kandeil, M.C. De Malherbe, S. Critchley, and M. Dokainish: Powder Technol., 1997, vol. 17, pp. 253–57.10.1016/0032-5910(77)80028-4 ↗
5. M. Rajab and D.S. Coleman: Powder Metall., 1985, vol. 38 (4), pp. 207–16.10.1179/pom.1985.28.4.207 ↗
6. G.C. Kuczynski and I. Zaplatyneskyi: J. Met., 1956, p. 215.10.1007/BF03377679 ↗
7. H.M. Macleod and K. Marshall: Powder Technol., 1977, vol. 16, pp. 107–22.10.1016/0032-5910(77)85028-6 ↗
8. D.H. Phillips and J.J. Lannutti: NDT & E. Int., 1997, vol. 30 (6), pp. 339–50.10.1016/S0963-8695(97)00020-0 ↗
9. Peizhen Kathy Lu and John Lannutti: J. Am. Ceram. Soc., 2000, vol. 83 (6), pp. 1393–98.10.1111/j.1151-2916.2000.tb01399.x ↗
10. C.M. Kong and J. Lannutti: J. Am. Ceram. Soc., 2000, vol. 83 (4), pp. 685–90.10.1111/j.1151-2916.2000.tb01259.x ↗
11. P. Lu, J.J. Lannutti, P. Klobes, and K. Meyer: J. Am. Ceram. Soc., 2000, vol. 83 (3), pp. 518–22.10.1111/j.1151-2916.2000.tb01227.x ↗
12. N. Guo, J.J. Lannutti, C. Mobley, and R. Showman: Proc. 104th AFS Casting Congr., Apr. 8–11, 2000, in press.
13. John J. Lannutti, Terry A. Deis, C.M. Kong, and David H. Phillips: Am. Ceram. Soc. Bull., 1997, vol. 76 (1), pp. 53–58.
14. Gregory A. Shoales and Randall M. German: Metall. Mater. Trans. A, 1999, vol. 30A (2), pp. 465–70.10.1007/s11661-999-0336-x ↗
15. Gregory A. Shoales and Randall M. German: Metall. Mater. Trans. A, 1998, vol. 29A (4), pp. 1257–63.10.1007/s11661-998-0252-5 ↗
16. Terry A. Deis and J.J. Lannutti: J. Am. Ceram. Soc., 1998, vol. 81 (5), pp. 1237–47.10.1111/j.1151-2916.1998.tb02474.x ↗
17. John J. Lannutti: MRS Bull., 1997, vol. 22 (12), pp. 38–44.10.1557/S0883769400034734 ↗
18. John Lannutti and Dale Fronk: Science of Whitewares, William M. Carty and Christopher W. Stinton, eds., American Ceramic Society, Alfred, New York, NY, 2000, pp. 319–25 and 345–49.
19. Y. Fu, G. Jiang, J.J. Lannutti, R.H. Wagoner, and Glenn S. Daehn: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 183–91.10.1007/s11661-002-0017-5 ↗
20. J. Rajchenbach, E. Clement, and J. Duran: Int. J. Mod. Phys. B, 1993, vol. 7 (9–10), pp. 1789–98.10.1142/S0217979293002584 ↗
21. S. Krishmurthy, H. Herrmann, V. Loreto, M. Nicodemi, and S. Roux: Physica A, 1999, vol. 270 (1–2), pp. 89–96.10.1016/S0378-4371(99)00258-7 ↗