journal article·2006-12

Structural superplasticity in a fine-grained eutectic intermetallic NiAl−Cr alloy

G. Frommeyer, W. Kowalski, R. Rablbauer

Publisher page

Abstract

A rapidly solidified and thermomechanically processed fine-grained eutectic NiAl−Cr alloy of the composition Ni33Al33Cr34 (at, pct) exhibits structural superplasticity in the temperature regime from 900°C to 1000°C at strain rates ranging from 10−5 to 10−3 s−1. The material consists of a B2-ordered intermetallic NiAl(Cr) solid solution matrix containing a fine dispersion of bcc chromium. A high strain-rate-sensitivity exponent of m=0.55 was achieved in strain-rate-change tests at strain rates of about 10−4 s−1. Maximum uniform elongations up to 350 pct engineering strain were recorded in superplastic strain to failure tests. Activation energy analysis of superplastic flow was performed in order to establish the diffusion-controlled dislocation accommodation process of grain boundary sliding. An activation energy of Q c=288±15 kJ/mole was determined. This value is comparable with the activation energy of 290 kJ/mole for lattice diffusion of nickel and for 63Ni tracer selfdiffusion in B2-ordered NiAl. The principal deformation mechanism of superplastic flow in this material is grain-boundary sliding accommodated by dislocation climb controlled by lattice diffusion, which is typical for class II solid-solution alloys. Failure in superplastically strained tensile samples of the fine-grained eutectic alloy occurred by cavitation formations along NiAl‖‖Cr interfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. K.A. Padmanabhan and C.J. Davis: Superplasticity—Mechanical and Structural Aspects, Fundamentals and Applications, Springer-Verlag, Berlin, 1980.
2. O.A. Kaibyshev: Superplasticity of Alloys, Intermetallics, and Ceramics, 1st ed., Springer-Verlag, New York, NY, 1992.10.1007/978-3-642-84673-1 ↗
3. T.G. Nich, J. Wadsworth, and O.D. Sherby: Superplasticity in Metals and Ceramics, Cambridge University Press, Cambridge, United Kingdom, 1997.
4. O.K. Kaibyshev, R.Z. Valiev, and A.K. Emaletdinov: Phys. Status Solidi (a), 1985, vol. 90, pp. 197–206.10.1002/pssa.2210900119 ↗
5. O.D. Sherby and J. Wadsworth: Progr. Mater. Sci., 1989, vol. 33, pp. 166–221.10.1016/0079-6425(89)90004-2 ↗
6. H. Fukuyo, H.C. Tsai, T. Oyama, and O.D. Sherby: Iron Steel Inst. Jpn. Int., 1991, vol. 31, pp. 76–85.10.2355/isijinternational.31.76 ↗
7. Q. Liu, W. Yang, and G. Chen: Metall. Mater., 1995, vol. 43, pp. 3571–82.10.1016/0956-7151(95)00032-Q ↗
8. G. Frommeyer and J.A. Jiménez: Metall. Mater. Trans. A. 2005, vol. 36A, pp. 295–300.10.1007/s11661-005-0302-1 ↗
9. O.D. Sherby and P.M. Burke: Progr. Mater. Sci., 1967, vol. 13, pp. 325–90.
10. T.G. Nieh and W.C. Oliver: Scripta Metall. Mater., 1989, vol. 23, pp. 851–54.10.1016/0036-9748(89)90258-5 ↗
11. A. Choudhury, A.K. Mukherjee, and V.K. Sikka: J. Mater. Sci., 1990. vol. 25, pp. 3142–47.10.1007/BF00587664 ↗
12. T. Takasugi, S. Rikukawa, and S. Hanada: Acta Metall. Mater., 1992, vol. 40, pp. 1895–906.10.1016/0956-7151(92)90176-F ↗
13. S. Ochiai, Y. Doi, I. Yamada, and Y. Kojima: J. Jpn. Inst. Met., 1993, vol. 57, pp. 214–21.10.2320/jinstmet1952.57.2_214 ↗
14. M. Oikawa, S. Hanada, T. Sakai, and S. Watanabe: Mater. Trans., JIM, 1995, vol. 36, pp. 1140–48.10.2320/matertrans1989.36.1140 ↗
15. W.Y. Kim, S. Hanada, and T. Takasugi: Secripta Metall. Mater., 1997, vol. 37, pp. 1053–58.10.1016/S1359-6462(97)00217-0 ↗
16. T.L. Lin, A. Shan, and D. Li: Scripta Metall. Mater., 1991, vol. 31, pp. 1455–60.10.1016/0956-716X(94)90055-8 ↗
17. D. Lin, T.L. Lin, A. Shan, and M. Chen, Intermetallics, 1996, vol. 4, pp. 489–96.10.1016/0966-9795(96)00027-1 ↗
18. G. Frommeyer, C. Derder, and J.A. Jiménez: Mater. Sci. Technol., 2002, vol. 18, pp. 981–86.10.1179/026708302225004919 ↗
19. D. Vanderschueren, M. Nobuki, and M. Nakamura: Scripta Metall. Mater., 1993, vol. 28, pp. 605–10.10.1016/0956-716X(93)90204-6 ↗
20. R. Imayev, M. Shagiev, G. Salishchev, V. Imayev, and V. Valitov: Scripta Mater., 1996, vol. 34, pp. 985–91.10.1016/1359-6462(95)00604-4 ↗
21. G. Wegmann, R. Gerling, F.P. Schimanski, H. Clemens, and G. Bartels: Intermetallics, 2002, vol. 10, pp. 511–17.10.1016/S0966-9795(02)00026-2 ↗
22. G. Frommeyer and S. Knippscheer in Ti-2003, Science and Technology, G. Lütjering and J. Albrecht, eds., Wiley, VCH, Weinheim, Germany 2003, pp. 2249–56.
23. H.S. Yang, P. Jin, and A.K. Mukherjee: Mater. Sci. Eng., A, 1992, vol. A153, pp. 457–64.10.1016/0921-5093(92)90237-U ↗
24. N. Ridley, M.F. Islam, and J. Pilling: in Structural Intermetallics, R. Darolia, J. Lewandowski, and C.T. Liu, eds., TMS, Warrendale, PA, 1993, pp. 63–68.
25. Y. Zang, J. Ma, X. Li, and C. Cao: Mater. Sci. Forum. 1994, vols. 170–171, pp. 495–97.10.4028/www.scientific.net/MSF.170-172.495 ↗
26. D. Jobart and J.J. Blandin: Mater. Sci. Eng., A, 1996, vol. 213, pp. 170–80.
27. C. Schuh and D.C. Dunand: Acta Mater., 1998, vol. 46, pp. 5663–75.10.1016/S1359-6454(98)00252-3 ↗
28. Y.T. Wu, C.T. Yang, and C.H. Koo: Mater. Chem. Phys., 2002, vol. 73, pp. 212–19.10.1016/S0254-0584(01)00379-0 ↗
29. K.L. Yang, J.C. Huang, and Y.N. Wang: Acta Mater., 2003, vol. 23, pp. 2577–94.10.1016/S1359-6454(03)00057-0 ↗
30. R.S. Chen, J.T. Guo, W.M. Yin, and J.Y. Zhou: Scripta Mater., 1999, vol. 40, pp. 209–15.10.1016/S1359-6462(98)00421-7 ↗
31. J. Hu, D. Liu, and L. Lin: Mater. Lett., 2004, vol. 58, pp. 1297–301.10.1016/j.matlet.2003.04.001 ↗
32. X.H. Du, J.T. Guo, and B.D. Zhou: Scripta Mater., 2001, vol. 45, pp. 69–74.10.1016/S1359-6462(01)00993-9 ↗
33. J.T. Guo and X.H. Du: Intermetallics, 2005, vol. 13, pp. 257–61.10.1016/j.intermet.2004.07.009 ↗
34. D. Jiang and L. Lin: Mater. Lett., 2002, vol. 57, pp. 747–52.10.1016/S0167-577X(02)00866-2 ↗
35. Y. Terada, K. Ohukubo, K. Nakagawa, T. Mohri, and T. Suzuki: Intermetallics, 1995, vol. 3, pp. 347–55.10.1016/0966-9795(95)94253-B ↗
36. R.D. Noebe, R.R. Bowman, and M.V. Nathal: in Physical Metallurgy and Processing of Intermetallic Compounds, N.S. Stoloff and V.K. Sika, eds., Chapman & Hall, New York, NY, 1996, pp. 212–96.
37. H.J. Grabke: Intermetallics, 1999, vol. 7, pp. 1153–58.10.1016/S0966-9795(99)00037-0 ↗
38. R. Rablbauer, G. Frommeyer, and F. Stein: Mater. Sci. Eng., A. 2003, vol. 343, pp. 301–07.10.1016/S0921-5093(02)00388-X ↗
39. D.B. Miracle and R. Darolia: in Intormetallic Compounds, J.H. Westbrook and R.L. Fleischer, eds., John Wiley & Sons Ltd., Chichester, West Sussex, 1994, pp. 53–72.
40. W. Smarsly and L. Singheiser: Materials for Advanced Power Engineering, Part II, Kluwer Academic Publishers: Dordrecht, The Netherlands, 1994, pp. 1731–43.
41. R. Rablbauer, R. Fischer, and G. Frommeyer: Z. Metallkd., 2004, vol. 95, pp. 525–34.10.3139/146.017973 ↗
42. F. Scheppe, P.R. Sahm, W. Hermann, U. Paul, and J. Preuss. Mater. Sci. Eng., A, 2002, vol. 329, pp. 596–601.10.1016/S0921-5093(01)01587-8 ↗
43. J.L. Walter and H.E. Cline: Metall. Trans., 1973, vol. 4, pp. 33–38.10.1007/BF02665403 ↗
44. P.H. Kitabijan and W.D. Nix: Acta Mater., 1998, vol. 46, pp. 701–10.10.1016/S1359-6454(97)00249-8 ↗
45. St. Frank, S.V. Divinski, U. Södervall, and C. Herzig: Acta Mater., 2001, vol. 49, pp. 1399–411.10.1016/S1359-6454(01)00037-4 ↗
46. H.J. Schäfer: Dr.-Ing. Dissertation, Fortschritt-Berichte, VDI Verlag, Düsseldorf, 1997.
47. G. Frommeyer and R. Rablbauer: Defect Properties and Related Phenomena in Intermetallie Alloys. Materials Research Society, Warrendale, PA, 2003, vol. 753, pp. 193–207.
48. W.H. Tian, C.S. Han, and M. Nemoto: Intermetallics, 1999 vol. 7, pp. 59–67.10.1016/S0966-9795(98)00015-6 ↗
49. R. Fischer, G. Frommeyer, and A. Schneider: Mater. Sci. Eng. A, 2003, vol. 353, pp. 87–91.10.1016/S0921-5093(02)00672-X ↗
50. A. Steiner and K.L. Komarek: Trans. TMS-AIME, 1964, vol. 230, pp. 786–95.
51. S. Kim and Y.A. Chang: Metall. Mater: Trans. A, 2000, vol. 31A, pp. 1519–42.10.1007/s11661-000-0162-7 ↗
52. S.V. Divinski and C. Herzig: Defect and Diffusion, 2002, Forum vols. 203–205, pp. 177–92.10.4028/www.scientific.net/DDF.203-205.177 ↗
53. T.E. Tietz and J.W. Wilson: Behaviour and Properties of Refractory Metals, Stanford University Press, Stanford, CA, 1965.