journal article·2006-08

Finite element analysis to optimize forming conditions for lower control arm

Youngsuk Kim, Seunghan Yang, Hyunsung Sohn, Junyoung Park, Seogou Choi

Publisher page

Abstract

Finite element simulations for the press forming of a lower arm are performed using the explicit dynamic finite element method (FEM) code PAM-STAMP. To optimize the press-forming conditions and secure a safe product without any failure, such as fractures and wrinkling, the FEM simulations are coupled with Taguchi’s orthogonal array experiment. Three design variables—the friction coefficient, plastic anisotropy parameter, and blank shape—are selected to be optimized. The numeric simulations reveal that the blank shape is the most important variable, and its modification is most effective in optimizing the press-forming conditions for a lower arm. In addition, the modified blank shape produces a high yield ratio for the in-come coil. The simulation results are confirmed with experimental ones.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Vibration and Dynamic Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Y.T. Keum, E. Nakamachi, R.H. Wagoner, and J.K. Lee:Int. J. Num. Meth. Eng., 1990, vol. 30, pp. 1471–502.10.1002/nme.1620300810 ↗
2. R.H. Wagoner and D. Zhou: inNumerical Methods in Industrial Forming Processes-NUMIFORM 92, edited by J.L. Chenot, R.D. Wood, and O.C. Zienkiewicz. Rotterdam, Netherlands, 1992, pp. 123–32.
3. PAM_STAMP version 2.1, User’s Manual, Pam System International, ESI-GROUP Software Product Company, Rungis, CEDEX, 1996.
4. M.S. Phadke and G. Taguchi:GLOBECOM’87 Meeting, IEEE Communications Society, Tokyo, Japan, 1987, pp. 1002–07.
5. M.S. Phadke:Quality Engineering Using Robust Design, Prentice-Hall International Inc., 1989.10.1007/978-1-4684-1472-1_3 ↗
6. ETA/FEMB Version 27, User’s Manual, Engineering Technology Associates, 1998.
7. Y.S. Kim and K.S. Kim:J. Kor. Soc. Tech. Plasticity, 1994, vol. 3 (1), pp. 51–62.
8. Y.S. Suh and R.H. Wagoner:J. Mater. Eng. Perform., 1996, vol. 5 (A), pp. 489–94.10.1007/BF02648846 ↗
9. Y.S. Kim, J.B. Nam, M.S. Chu, and Y.D. Kwon:Metal Trans. A, 2000, vol. 31 (A), pp. 83–98.
10. K.C. Park and Y.S. Kim:J. Mater. Proc. Tech., 1995, vol. 51, pp. 64–78.10.1016/0924-0136(94)01578-O ↗
11. A.K. Ghosh, S.S. Hecker, and S.P. Keeler: inSheet Metal Forming and Testing, Workablility Testing Techniques, edited by G.E. Dieter, ASM, Metals Park, Ohio, 1984, pp. 125–95.
12. Y.S. Kim:Theory of Engineering Plasicity, Sigma Press, Seoul, 2001.
13. Y.S. Kim and H.S. Son:J. Kor. Soc. Mech. Eng., 1999, vol. 23 (8), pp. 1380–87.