Anisotropic threshold stress intensity factor, KIH and crack growth rate in delayed hydride cracking of Zr-2.5Nb pressure tubes
Source abstract
Abstract
The objectives of this study are to systematically investigate the delayed hydride cracking (DHC) velocity and the threshold-stress intensity factor, K IH , of a Zr-2.5Nb pressure tube as a function of orientation and elucidate the cause of this anistropic DHC behavior. The DHC velocity as a function of orientation was determined using flattened cantilever beam specimens with 60 ppm H while the threshold-stress intensity factor K IH , was evaluated as a function of orientation on the curved compact-tension (CT) and cantilever-beam (CB) specimens charged with hydrogen to 200 ppm H. To infer a difference in a stress gradient ahead of the crack tip as a function of orientation, tensile tests were conducted at temperatures ranging from room temperature (RT) to 560 °C using small tensile specimens of 2-mm-gage length taken from three directions of the tube. A textural change was investigated by comparing the inverse pole figures before and after DHC while the {10(ar 1)7} pole figures were constructed to find out the growth pattern of the DHC crack as a function of orientation. Faster DHC velocity and lower K IH were obtained over temperatures of 170 °C to 270 °C, when the DHC crack grew in the longitudinal direction of the Zr-2.5Nb pressure tube. The strain hardening after yielding and the extent of the textural change accompanied by DHC were higher in the longitudinal direction of the tube, suggesting a higher stress gradient ahead of the crack tip. Thus, the anisotropic DHC behavior of a Zr-2.5Nb pressure tube is discussed based on the stress gradient ahead of the crack tip governed by strain-hardening rate after yielding and a change in texture accompanied by DHC, and the distribution of the {10(ar 1)7} hydride habit planes.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Nuclear reactor physics and engineering · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. C.E. Coleman, S. Sagat, G.K. Shek, D.B. Graham, and M.A. Durand: Int. J. Pressure Vessel Piping, 1990, vol. 43, pp. 187–204.10.1016/0308-0161(90)90101-M ↗
2. M.P. Puls: Nucl. Eng. Design, 1997, vol. 171, pp. 137–48.10.1016/S0029-5493(96)01310-6 ↗
3. Young Suk Kim, Sang Chul Kwon, and Sung Soo Kim: J. Nucl. Mater., 2000, vol. 280, pp. 304–11.10.1016/S0022-3115(00)00054-4 ↗
4. Y.S. Kim, Y. Perlovich, M. Isaenkova, S.S. Kim, and Y.M. Cheong: J. Nucl. Mater., 2001, vol. 297, pp. 272–302.
5. S. Sagat, C.E. Coleman, M. Griffiths, and B.J.S. Wilkins: in Zirconium in the Nuclear Industry: 10th Int. Symp., ASTM STP 1245, A.M. Garde and E.R. Bradley, eds., ASTM, Philadelphia, PA, 1994, pp. 35–61.
6. L.A. Simpson and M.P. Puls: Metall. Trans. A, 1979, vol. 10A, pp. 1093–1105.10.1007/BF02811655 ↗
7. M.P. Puls: Metall. Trans. A, 1990, vol. 21A, pp. 2905–17.10.1007/BF02647211 ↗
8. Sung Soo Kim and Young Suk Kim: J. Nucl. Mater., 2000, vol. 279, pp. 286–92.10.1016/S0022-3115(99)00284-6 ↗
9. Sung Soo Kim, Sang Chul Kwon, Kee Nam Choo, Yong Moo Cheong, and Young Suk Kim: Key Eng. Mater., 2000, vols. 183–187, pp. 845–50.10.4028/www.scientific.net/KEM.183-187.845 ↗
10. Sung Soo Kim, Sang Chul Kwon, and Young Suk Kim: J. Nucl. Mater., 1999, vol. 273, pp. 52–59.10.1016/S0022-3115(99)00017-3 ↗
11. F.H. Huang and W.J. Mills: Metall. Trans. A, 1991, vol. 22A, pp. 2049–60.10.1007/BF02669872 ↗
12. C.E. Coleman: Proc. 5th Int. Conf., ASTM STP 754, D.G. Franklin, ed., ASTM, Philadelphia, PA, 1982, pp. 393–411.
13. C.E. Coleman, S. Sagat, and K.F. Amouzouvi: AECL-9524, Atomic Energy of Canada Limited, Chalk River Lab, Chalk River, ON, 1987.
14. W.J. Mills and F.H. Huang: Eng. Fract. Mech., 1991, vol. 29, pp. 241–57.10.1016/0013-7944(91)90040-8 ↗
15. R.P. Marshall: J. Nucl. Mater., 1967, vol. 24, pp. 34–48.10.1016/0022-3115(67)90078-5 ↗
16. B. Leitch, N. Christodoulou, and J. Root: Trans. 5th Int. Conf. on Structural Mechanics in Reactor Technology (SmiRT-15), S.P. Change, ed., Seoul, 1999, vol. XII, pp. 133–46.
17. Young Suk Kim: KAERI/TR-1672/2000, Korea Atomic Energy Research Institute, Daejon, 2000.