Microstructural Engineering in Eutectoid Steel: A Technological Possibility?
Source abstract
Abstract
Eutectoid wire rods were subjected to controlled thermo-mechanical processing (TMP). Both increased cooling rate and applied stress during the austenite-to-pearlite decomposition produced significant changes in the microstructure: major increases in the pearlite’s axial alignment and minor decreases in the interlamellar spacing. The pearlite alignment was correlated with changes in the ferrite crystallographic texture and the state of residual stress. Microstructural engineering, improved axial alignment of pearlite, through controlled TMP gave a fourfold increase in torsional ductility. TMP of eutectoid steel thus appears to have interesting technological possibilities.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Y. Li, D. Raabe, M. Herbig, P. Choi, S. Goto, A. Kostka and H. Yarita: Phys. Rev. Lett., 2014, vol. 113, 106104, pp. 1-5.
2. G. Langford: Metall. Trans. A., 1977, vol. 8, pp. 861–75.10.1007/BF02661567 ↗
3. M. Zelin: Acta Mater., 2002, vol. 50, pp. 4431–4447.10.1016/S1359-6454(02)00281-1 ↗
4. X. Zhang, A. Godfrey, N. Hansen, X. Huang, W. Liu and Q. Liu: Mater. Charact., 2009, vol. 61, pp. 65-72.10.1016/j.matchar.2009.10.007 ↗
5. X. Zhang, A. Godfrey, X. Huang, N. Hansen and Q. Liu: Acta Mater., 2011, vol. 59, pp. 3422-3430.10.1016/j.actamat.2011.02.017 ↗
6. Y.J. Li, P. Choi, S. Goto, C. Borchers, D. Raabe and R. Kirchheim: Acta Mater., 2012, vol. 60, pp. 4005-4016.10.1016/j.actamat.2012.03.006 ↗
7. A. B. Dove, “Steel Wire Handbook – Volume 3”, First ed., The Wire Association, Branford, Connecticut, 1972.
8. B. Verlinden, J. Driver, I. Samajdar and R.D. Doherty, “Thermo-Mechanical Processing of Metallic Materials”, First ed., Pergamon Materials Series, Elsevier, Oxford, 2007.
9. Sorby HC (1886) J. Iron Steel Inst. 1: 140–144.
10. Benedicks C (1905) J. Iron Steel Inst. 2: 352-70.
11. Howe HM, Levy AG (1916) J. Iron Steel Inst. 2: 210.
12. F. C. Hull and R. F. Mehl: Trans Am Soc Met., 1942, vol. 30, pp. 381-421.
13. M. Hillert: The Formation of Pearlite” in Decomposition of Austenite by Diffusional Processes, V.F. Zackay and H.I. Aaronson, Interscience, Wiley, New York, 1962.
14. C. G. Andrés, F. G. Caballero, C. Capdevila and H. K. D. H. Bhadeshia: Scr. Mater., 1998, vol. 39, pp. 791-96.10.1016/S1359-6462(98)00146-8 ↗
15. H. I. Aaronson, M. Enomoto and J. K. Lee, “Mechanisms of diffusional phase transformations in metals and alloys”, First ed., CRC Press, Taylor & Francis Group, Boca Raton, FL, 2010.10.1201/b15829 ↗
16. V. A. Esin, B. Denand, Q. L. Bihan, M. Dehmas, J. Teixeira, G. Geandier, S. Denis, T. Sourmail and E. A. Gautier: Acta Mater., 2014, vol. 80, pp. 118-31.10.1016/j.actamat.2014.07.042 ↗
17. K. E. Puttick: J Iron Steel Inst., 1957, vol. 185, pp. 161-167.
18. X. Zhang, A. Godfrey, N. Hansen and X. Huang: Acta Mater., 2013, vol. 61, pp. 4898-4909.10.1016/j.actamat.2013.04.057 ↗
19. L. E. Karkina, I. N. Karkin, I. G. Kabanova and A. R. Kuznetsov: Appl. Cryst., 2015, vol. 48, pp. 97-106.10.1107/S1600576714026107 ↗
20. M. Guziewski, S. P. Coleman and C. R. Weinberger: Acta Mater., 2018, vol. 144, pp. 656-665.10.1016/j.actamat.2017.10.070 ↗
21. M. M. Aranda, B. Kim, R. Rementeria, C. Capdevila and C. G. Andrés: Met. Metall. Trans. A, 2014, vol. 45, pp. 1778-86.10.1007/s11661-013-1996-0 ↗
22. T. Z. Zhao, G. L. Zhang, S. H. Zhang and L. Y. Zhang: J. Iron Steel Res. Int., 2016, vol. 23, pp. 1290-96.10.1016/S1006-706X(16)30190-X ↗
23. P. K. Agarwal and J. K. Brimacombe: Metall. Trans. A, 1981, vol. 12, pp. 121-33.10.1007/BF02674765 ↗
24. E. B. Hawbolt, B. Chau and J. K. Brimacombe: Metall. Trans. A, 1985, vol. 16, pp. 565-78.10.1007/BF02814230 ↗
25. T. T. Pham, E. B. Hawbolt and J. K. Brimacombe: Metall. Mater. Trans. A, 1995, vol. 26, pp. 1987-92.10.1007/BF02670670 ↗
26. T. T. Pham, E. B. Hawbolt and J. K. Brimacombe: Metall. Mater. Trans. A, 1995, vol. 26, pp. 1993-2000.10.1007/BF02670671 ↗
27. E. B. Hawbolt, B. Chau and J. K. Brimacombe: Metall. Trans. A, 1983, vol. 14, pp. 1803-1815.10.1007/BF02645550 ↗
28. M. Enomoto, W. Huang and H. Ma: ISIJ Int., 2012, vol. 52, pp. 626-631.10.2355/isijinternational.52.626 ↗
29. M. Enomoto, W. Huang and H. Ma: ISIJ Int., 2012, vol. 52, pp. 632-37.10.2355/isijinternational.52.632 ↗
30. A. Durgaprasad, S. Giri, S. Lenka, S. Kundu, S. Mishra, S. Chandra, R. D. Doherty and I. Samajdar: Acta Mater., 2017, vol. 129, pp. 278-289.10.1016/j.actamat.2017.02.008 ↗
31. C Zener: Trans Am Inst Min Metall Eng., 1946, vol. 167, pp. 550-95.
32. R. F. Mehl and H. C. Hagel: Prog. Met. Phys., 1956, vol. 6, pp. 74–134.10.1016/0502-8205(56)90005-3 ↗
33. G. F. Bolling and R. H. Richman: Metall. Trans., 1970, vol. 1, pp. 2095-2104.10.1007/BF02643420 ↗
34. B. L. Bramfitt and A. R. Marder: Metall. Trans., 1973, vol. 4, pp. 2291-2301.10.1007/BF02669368 ↗
35. P. C. Campbell, E. B. Hawbolt and J. K. Brimacombe: Metall. Trans A., 1991, vol. 22, pp. 2769-78.10.1007/BF02851371 ↗
36. P. C. Campbell, E. B. Hawbolt and J. K. Brimacombe: Metall. Trans A., 1991, vol. 22, pp. 2779-90.10.1007/BF02851372 ↗
37. S. Goto, R. Kirchheim, T. Al-Kassab and C. Borchers: Trans. Non ferrous Met. Soc. China, 2007, vol. 17, pp.1129-1138.10.1016/S1003-6326(07)60238-6 ↗
38. A. Durgaprasad, S. Giri, S. Lenka, S. Kundu, S. Mishra, S. Chandra, R. D. Doherty and I. Samajdar, Metall. Trans A., 2017, vol. 48, pp. 4583-4597.10.1007/s11661-017-4269-5 ↗
39. K. W. Andrews: Acta Metall., 1963, vol. 11, pp. 939-946.10.1016/0001-6160(63)90063-4 ↗
40. S. Denis, E. Gautier, S. Sjostrom and A. Simon: Acta Metall., 1987, vol. 35, pp. 1621-1632.10.1016/0001-6160(87)90109-X ↗
41. S. Denis, S. Sjostrom and A. Simon: Metall. Trans A., 1987, vol. 18, pp. 1203-1213.10.1007/BF02647190 ↗
42. P. Van Houtte, The “MTM-FHM” and “MTM-TAY” Software System - Version 2, Manual, Department of MME, KLU Leuven, Belgium, 1995.
43. Bunge HJ (2013) Texture Analysis in Materials Science: Mathematical Methods”, Elsevier, London 2013.
44. P. Van Houtte and L. De Buyser: Acta Metall. Mater., 1993, vol. 41, pp. 323-336.10.1016/0956-7151(93)90063-X ↗
45. Dong-Woo Suh, Chang-Seok Oh, Heung Nam Han and Sung-Joon Kim: Acta Mater., 2007, vol. 55, pp. 2659–2669.10.1016/j.actamat.2006.12.007 ↗
46. Stuart H, Ridley N (1966) J. Iron Steel Inst. 204: 711-717.
47. Reed Hill RE (1973) Physical Metallurgy Principles, 2nd ed., pp. 702, Elsevier: Amsterdam
48. Askeland DR (1989) The Science and Engineering of Materials, 2nd Edition, p. 372, Brooks, Cole: Boston
49. Vander Voort GF (1991) The Atlas of Time- Temperature Diagrams for Irons and Steels, ASM International: Reading PA, pp. 11.
50. N. Ridley: Metall. Trans. A., 1984, vol. 15, pp. 1019-36.10.1007/BF02644694 ↗
51. A. R. Marder and B. L. Bramfitt: Metallurgical Transactions A, 1975, vol. 6, pp. 2009-2014.10.1007/BF03161825 ↗
52. F. Fang, L. Zhou, X. Hu, X. Zhou, Y. Tu, Z. Xie and J. Jiang: Mater. Des., 2015, vol. 79, pp. 60-67.10.1016/j.matdes.2015.04.036 ↗
53. F. Fang, Y. Zhao, L. Zhou, X. Hu, Z. Xie and J. Jiang: Mater. Sci. Eng. A., 2014, vol. 17, pp. 505-10.10.1016/j.msea.2014.09.061 ↗
54. X. Hu, L. Wang, F. Fang, Z. Ma, Z. H. Xie and J. Jiang: J Mater. Sci., 2013, vol. 48, pp. 5528-5535.10.1007/s10853-013-7347-0 ↗
55. T. Z. Zhao, G. L. Zhang, H. W. Song, M. Cheng and S. H. Zhang: J Mater Eng. Per. 2014 Vol. 23, pp. 3279-84.10.1007/s11665-014-1098-1 ↗
56. Y. He, S. Xiang, W. Shi, J. Liu, X. Ji and W. Yu: Mater. Sci. Eng. A., 2017, vol. 23, pp. 153-63.10.1016/j.msea.2016.12.004 ↗
57. P. Van Houtte: Textures and Microstruct., 1987, vol. 7, pp. 187-205.10.1155/TSM.7.187 ↗
58. S. Raveendra, A. K. Kanjarla, H. Paranjape, S.K. Mishra, S. Mishra and L. Delannay: Metall. Mater. Trans A., 2011, vol. 42, pp. 2113–2124.10.1007/s11661-010-0580-0 ↗
59. Z. Li, Z. Wen, F. Su, R. Zhang and Z Zhou: J Mater Sci., 2018, vol. 53, pp. 1424–1436.10.1007/s10853-017-1556-x ↗
60. S.W. Thompson, P.R. Howell, Scr. Metall., 1988, vol. 22, pp. 1775-1778.10.1016/S0036-9748(88)80282-5 ↗
61. S. Zhang: Adv. Mater. Res., 2011, vol. 284-286, pp. 2358-65.10.4028/www.scientific.net/AMR.284-286.2358 ↗
62. L. Zhou, F. Fang, L. Wang, H. Chen, Z. Xie and J. Jiang: Mater. Sci. Eng. A, 2018, vol. 713, pp. 52–60.10.1016/j.msea.2017.12.055 ↗
63. Y. J. Li, P. Choi, S. Goto S, C. Borchers, D. Raabe and R. Kirchheim: Acta Mater., 2011, vol. 59, pp. 3965-77.10.1016/j.actamat.2011.03.022 ↗
64. T. Z. Zhao, G. L. Zhang, S. H. Zhang and L. Y. Zhang: J. Iron Steel Res. Int., 2016, vol. 23, pp. 1206-1212.10.1016/S1006-706X(16)30177-7 ↗
65. T. Z. Zhao, S. H. Zhang, G. L. Zhang and L. Y. Zhang: Mater. Des., 2014, vol. 59, pp. 397-405.10.1016/j.matdes.2014.03.029 ↗
66. G. Langford: Metall. Trans. A., 1970, Vol. 8, pp. 121 – 132.
67. S.K. Lee, D.C. Ko and B. M. Kim: Mater. Des., 2009, vol. 30, pp. 2919–2927.10.1016/j.matdes.2009.01.007 ↗
68. A. Durgaprasad: Ph.D. Thesis, Department of MEMS, Indian Institute of Technology Bombay, Mumbai, 2017.
69. K. Shimizu and N. Kawabe: ISIJ Int, 2001, vol. 41, pp. 183–191.10.2355/isijinternational.41.183 ↗
70. C. Borchers and R. Kirchheim: Prog. Mater. Sci., 2016, vol. 82, pp. 405-444.10.1016/j.pmatsci.2016.06.001 ↗