journal article·2017-05

Multilayer Mg-Stainless Steel Sheets, Microstructure, and Mechanical Properties

Junya Inoue, Alireza Sadeghi, Nobuhiko Kyokuta, Toshinori Ohmori, Toshihiko Koseki

Publisher page

Abstract

Different multilayer Mg AZ31 and SS304L steel sheet combinations were prepared with different volume fractions of Mg. Isolated stress–strain curves of the Mg layers showed significant improvements in the strength and elongation of multilayer samples. Results indicated that in the most extreme situation with the lowest Mg volume fraction (V f = 0.39), the ultimate strength was increased by 25 pct to 370 MPa and the elongation was improved by 70 pct to 0.34. Investigation of the fracture surface showed that failure occurs by the coalescence of cracks close to the interface region. The improved strength of the multilayer samples was due to the combined effect of surface crack prevention by the steel layer and the higher work-hardening rate caused by the possible increased activity of non-basal systems. It is suggested that the stronger work-hardening behavior and the enhanced activity of non-basal systems in the multilayer samples were due to the formation of new stress components in the transverse direction. The larger the volume fraction of steel in the multilayer, the longer the distance remaining unstrained before the UTS.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. A. Kontsos, T. Loutas, V. Kostopoulos, K. Hazeli, B. Anasori, and M.W. Barsoum, Acta Mater., 2011, vol.. 59, pp. 5716-5727.10.1016/j.actamat.2011.05.048 ↗
2. M. Paramsothy, J. Chan, R. Kwok, and M. Gupta, Composites Part A, 2011, vol. 42, pp. 2093-2100.10.1016/j.compositesa.2011.09.019 ↗
3. Y. Fouad, Alex. Eng. J., 2014, vol. 53, pp. 289-293.10.1016/j.aej.2014.03.005 ↗
4. C. Luo, W. Liang, Z. Chen, J. Zhang, C. Chi, F. Yang, Mater. Charact., 2013, vol. 84, pp. 34-40.10.1016/j.matchar.2013.07.007 ↗
5. T. Koseki, J. Inoue, and S. Nambu, Mater. Trans. 2014, vol. 55 pp. 227-23.10.2320/matertrans.M2013382 ↗
6. A. Cetin, J. Krebs, A. Durussel, A. Rossoll, J. Inoue, T. Koseki, S. Nambu, and A. Mortensen, Metall. Mater. Trans. A, 2011, vol. 42. p.3509.10.1007/s11661-011-0756-2 ↗
7. M. Koba, T. Araki, S. Nambu, J. Inoue, and T. Koseki Metall. Mater. Trans. A, 2012, vol. 43, pp. 592-597.10.1007/s11661-011-0878-6 ↗
8. N. Kyokuta, M. Koba, T. Araki, S. Nambu, J. Inoue, T. Koseki, Metall. Mater. Trans. A, 2013, vol. 54, pp. 994-1000.
9. L. Fuskova, S. Yi, L. Nascimento, J. Bohlen, D. Letizig, and K.U. Kainer, Proc. TMS, San Francisco, 2009, pp. 81-84.
10. H. Wang, J. Han, S. Du, and D. O. Northwood, Mater. Sci. and Eng. A, 2007, vol. 445-446,, pp. 517-52510.1016/j.msea.2006.09.082 ↗
11. C.K. Syn, D.R. Lesuer, J. Wolfenstine, and O.D. Sherby, Metall. Mater. Trans., A, 1993, vol.24, pp. 1647-53.10.1007/BF02646603 ↗
12. A.N. Chamos, Sp.G. Pantelakis, G. N. Haidemenopoulos and E. Kamoutsi, Fatigue Fract Eng. Mater. Struct. Vol 31, pp. 812-821.10.1111/j.1460-2695.2008.01267.x ↗
13. S. Basu, S. Abolghasem, and M.R. Shankar, Metall. Mater. Trans. A, 2013, vol. 44., p 4558.10.1007/s11661-013-1796-6 ↗
14. M. Efe, W. Moscoso, K. P. Trumble, W. D. Compton, and S. Chandrasekar, Acta Mater., 2012, vol. 60, pp. 2031-204210.1016/j.actamat.2012.01.018 ↗
15. Q. Yua, L. Qi, R.K. Mishra, J. Li, and A. M. Minor, Proc. Natl. Asad. Sci., 2013, vol. 110, pp. 13289–1329310.1073/pnas.1306371110 ↗
16. S. Nambu, M. Michiuchi, Y. Ishimoto, K. Asakura, J. Inoue and T. Koseki, Scripta Mater., 2009, vol. 60, pp. 221–224.10.1016/j.scriptamat.2008.10.007 ↗