journal article·2017-04

Morphology-Dependent Hardness of Cr7C3-Ni-Rich Alloy Composite vs Orientation Independent Hardness of Cr7C3 Primary Phase in a Laser Clad Microstructure

Lakshmi Narayanan Venkatesh, Pitchuka Suresh Babu, Ravi Chandra Gundakaram, Roger D. Doherty, Shrikant V. Joshi, Indradev Samajdar

Publisher page

Abstract

Microstructural evolution with superheating was studied in chromium carbide-nickel coatings deposited by laser cladding. At lower superheating, selective growth of 〈0001〉 direction from the high density of Cr7C3 grains nucleated resulted in a columnar structure with (0001) texture. Increased superheating lead to the loss of columnar structure as well as the (0001) texture. The hexagonal Cr7C3 showed an unusual isotropic nanoindentation hardness evidently correlated with its low c/a ratio. However, the rod-like morphology of the carbide dendrites resulted in significant anisotropy in the hardness of the composite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · High Entropy Alloys Studies · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. H. O. Pierson: Handbook of Refractory Carbides and Nitrides, Noyes Publications., New Jersey, NJ, 1996, pp. 110-114
2. J.C. Betts: J. Mater. Process. Tech., 2009, vol. 209, pp. 5229-523810.1016/j.jmatprotec.2009.03.010 ↗
3. J. Morimoto, Y. Sasaki, S. Fukuhara, N. Abe and M. Tukamoto: Vacuum, 2006, vol. 80, pp. 1400-140510.1016/j.vacuum.2006.01.070 ↗
4. D.W. Zhang, T.C. Lei and F.J. Li: Wear, 2001, vol. 251, pp. 1372-137610.1016/S0043-1648(01)00770-0 ↗
5. L. Venkatesh, I. Samajdar, M. Tak, R.D. Dohetry, R.C. Gundakaram, K.S. Prasad and S.V. Joshi: App. Surf. Sci., 2015, vol. 357, pp. 2391-240110.1016/j.apsusc.2015.09.260 ↗
6. V. Ocelik, I. Furar and J. T. M. De Hosson: Acta Mater., 2010, vol. 58, pp. 6763-677210.1016/j.actamat.2010.09.002 ↗
7. M. Guaumann, C. Bezencon, P. Canalis, W. Kurz: Acta Mater., 2001, vol. 49, pp. 1051-106210.1016/S1359-6454(00)00367-0 ↗
8. G.E. Dieter: Mechanical Metallurgy, 2nd ed., McGraw-Hill Book Co., New York, NY, 1986, pp.115-118
9. N.A. Hill and J.W.S. Jones: J. Nucl. Mater., 1961, vol. 2, pp. 138-15510.1016/0022-3115(61)90002-2 ↗
10. K. Tusya: J. Nucl. Mater. 1967, vol. 22, pp. 148-15710.1016/0022-3115(67)90024-4 ↗
11. K.S. Suresh, T. Kitashima and Y.Y. Mitarai: Mater. Sci. Eng., A, 2015, vol. 618, pp. 335-34410.1016/j.msea.2014.09.031 ↗
12. C.F. Mimchel, M. Coren, P. Castany, I. Peron and T. Gloriant: Mater. Sci. Eng., A 2014, vol. 613, pp. 159-16210.1016/j.msea.2014.06.098 ↗
13. W. Skrotzki, K. Kegler, R. Tamm and C.G. Oertel: Cryst. Res. Technol., 2005, vol. 40, pp. 90-9410.1002/crat.200410311 ↗
14. W. Kurz and D.J. Fisher: Fundamentals of Solidification, 3rd ed., Trans Tech Publications., Switzerland, 1989, pp. 21-89
15. E. Toyserkani, A. Khajepour and S. F. Corbin: Laser Cladding, CRC press., Boca Raton, 2004, pp. 32-3810.1201/9781420039177 ↗
16. Y.P. Kathuria: Surf. Coat. Tech., 1997, vol. 97, pp. 442-44710.1016/S0257-8972(97)00165-5 ↗
17. M.C. Flemings: Met. Trans. A., 1974, vol. 5, pp. 2121-213410.1007/BF02643923 ↗
18. B. Chalmers: J. Aust Inst. Metals, 1963, vol. 8, pp. 255
19. R. D. Doherty, P.D. Cooper, M.H. Bradbury and F.K. Honey: Met. Tans. A., 1977, vol. 8A, pp. 397-40210.1007/BF02661748 ↗
20. H.J. Bunge: Texture analysis in Materials Science-Mathematical methods, Butterworth and Co Publishers, London 1982. pp. 88-90
21. R. Vilar, E.C. Santos, P.N. Ferreira, N. Franco and R.C. da Silva: Acta Mater., 2009, vol. 57, pp. 5292-530210.1016/j.actamat.2009.06.049 ↗
22. W.F. Savage, E.F. Nippes and T.W. Miller: Weld. J., 1976, vol. 55(6), pp. 165-173
23. M.H. Burden and J.D. Hunt: Met. Trans A., 1975, vol. 6, pp. 240-24110.1007/BF02673705 ↗
24. J. Dusza, T. Eschner and K. Rundgren: J. Mater. Sci. Lett., 1997, vol. 16, pp. 1664-166710.1023/A:1018521930114 ↗
25. D. Chakraborty and J. Mukerji: J. Mater. Res. Bull., 1982, vol. 17, pp. 843-84910.1016/0025-5408(82)90003-4 ↗
26. K. Niihara and T. Hirai: J. Mater. Sci., 1979, vol. 14, pp. 1952-196010.1007/BF00551037 ↗
27. S. Otani, M.M. Korsukova and T. Mitsuhashi: J. Cryst. Growth, 1998, vol. 194, pp. 430-43310.1016/S0022-0248(98)00691-5 ↗
28. G.B. Viswanathan, E. Lee, D.M. Maher, S. Banerjee and H. L. Fraser: Acta Mater., 2005, vol. 53, pp. 5101-511510.1016/j.actamat.2005.07.030 ↗
29. J. Kwon, M.C. Brandes, P.S. Phani, A.P. Pilchak, Y.F. Gao, E.P. George, G.M. Pharr and M.J. mills: Acta Mater., 2013, vol. 61, pp. 4743-475610.1016/j.actamat.2013.05.005 ↗
30. T.B. Britton, H. Liang, F.P.E. Dunne and A.J. Wilkinson: Proc. R. Soc. London, Ser. A, 2010, vol. 466, pp. 695-71910.1098/rspa.2009.0455 ↗
31. R. S. Martin, M.T.P. Prado, J. Segurado, J. Bohlen, I.G. Urrutia, J. Llorca and J.M.M.Aldareguia: Acta Mater., 2014, vol. 71, pp. 283-29210.1016/j.actamat.2014.03.014 ↗
32. J. Bocan, J. Manak and A. Jager: Mater. Sci. Eng., A, 2015, vol. 644, pp. 121-12810.1016/j.msea.2015.07.055 ↗
33. T. Csanadi, S. Grasso, A. Kovalcikova, J. Dusza and M. Reece: J. Eur. Ceram. Soc., 2016, vol. 36, pp. 239-24210.1016/j.jeurceramsoc.2015.09.012 ↗
34. K. Nakano and I. Higashi: J. Less. Common. Met., 1979, vol. 67, pp. 485-49210.1016/0022-5088(79)90032-8 ↗
35. T. Csanadi, M. Blanda, N.Q. Chinh, P. Hvizdos and J. Dusza: Acta Mater., 2015, vol. 83, pp. 397-40710.1016/j.actamat.2014.09.048 ↗
36. J.J. Rao, E.J. Pique, C. Verge, J.M. Tarrago, A. Mateo, J. Fair and L. Llanes: J. Eur. Ceram. Soc. 2015, vol. 35, pp. 3419-342510.1016/j.jeurceramsoc.2015.04.021 ↗
37. M. Wang: Scripta Mat. 2012, vol. 42, pp. 24-27
38. R.D. Doherty: in Physical metallurgy, 4th ed., vol. 2, ed. By R.W. Cahn, P. Haasen (Elsevier, North-Holland, 1996), pp. 1364–1505
39. S.E. Baumann and D.B. Williams: Met. Trans. A., 1985, vol. 16A, pp. 120310.1007/BF02670325 ↗
40. M.I. Bergman, L. Giersch, M. Hinczewski and V. Izzo: Phy. Earth. Planet. Sci. 2000, vol. 117, pp. 139-15110.1016/S0031-9201(99)00093-X ↗