journal article·2016-11Open access

Measurements and Modeling of Stress in Precipitation-Hardened Aluminum Alloy AA2618 during Gleeble Interrupted Quenching and Constrained Cooling

Nicolas Chobaut, Denis Carron, Peter Saelzle, Jean-Marie Drezet

Abstract

Solutionizing and quenching are the key steps in the fabrication of heat-treatable aluminum parts such as AA2618 compressor impellers for turbochargers as they highly impact the mechanical characteristics of the product. In particular, quenching induces residual stresses that can cause unacceptable distortions during machining and unfavorable stresses in service. Predicting and controlling stress generation during quenching of large AA2618 forgings are therefore of particular interest. Since possible precipitation during quenching may affect the local yield strength of the material and thus impact the level of macroscale residual stresses, consideration of this phenomenon is required. A material model accounting for precipitation in a simple but realistic way is presented. Instead of modeling precipitation that occurs during quenching, the model parameters are identified using a limited number of tensile tests achieved after representative interrupted cooling paths in a Gleeble machine. This material model is presented, calibrated, and validated against constrained coolings in a Gleeble blocked-jaws configuration. Applications of this model are FE computations of stress generation during quenching of large AA2618 forgings for compressor impellers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. B. Dubost, M. Bouet-Griffon, P.H. Jeanmart, and M.O. Homette: Proceedings of the International Conference on Residual Stresses, Edited by: G. Beck, S. Denis, and A. Simon, Springer, 1989, pp. 581–86.10.1007/978-94-009-1143-7_97 ↗
2. J.C. Boyer and M. Boivin: Mater. Sci. Technol., 1985, vol. 1, pp. 786–92.10.1179/mst.1985.1.10.786 ↗
3. N. Chobaut, D. Carron, and J.-M. Drezet: J Alloys Compd., 2016, vol. 654, pp. 56–62.10.1016/j.jallcom.2015.09.113 ↗
4. P. Schloth, A. Menzel, J.L. Fife, J.N. Wagner, H. Van Swygenhoven, and J.-M. Drezet, Scr. Mater., 2015, vol. 108, pp. 56–9.10.1016/j.scriptamat.2015.06.015 ↗
5. D. Godard, P. Archambault, S. Denis, E. Gautier, and F. Heymes: Proceedings of the 7th International Seminar of IFHT on Heat Treatment and Surface Engineering of Light Alloys, Edited by: J. Lendvai and T. Réti, 1999, pp. 249–57.
6. J. Mackerle: Comput. Mater. Sci., 2003, vol. 27, pp. 313–32.10.1016/S0927-0256(03)00038-7 ↗
7. J.S. Robinson, D.A. Tanner, and C.E. Truman: Strain, 2014, vol. 50, pp. 185–207.10.1111/str.12091 ↗
8. D. Bardel, M. Perez, D. Nelias, A. Deschamps, C.R. Hutchinson, D. Maisonnette, T. Chaise, J. Garnier, and F. Bourlier: Acta Mater., 2014, vol. 62, pp. 129–40.10.1016/j.actamat.2013.09.041 ↗
9. A. Deschamps and Y. Brechet: Acta Mater., 1998, vol. 47, pp. 293–305.10.1016/S1359-6454(98)00296-1 ↗
10. S. Gouttebroze, A. Mo, Ø. Grong, K.O. Pedersen, and H.G. Fjær: Metall. Mater. Trans. A, 2008, vol. 39, pp. 522–34.10.1007/s11661-007-9443-8 ↗
11. D. Godard, P. Archambault, J.-P. Houin, E. Gautier, and F. Heymes: Proceedings of ICAA6, Edited by: T. Sato, S. Kumai, T. Kobayashi, and Y. Murakami, 1998, pp. 1033–8.
12. M. Reich and O. Kessler: Mater. Sci. Technol., 2012, vol. 28, pp. 769–72.10.1179/1743284711Y.0000000085 ↗
13. N. Chobaut, D. Carron, S. Arsène, P. Schloth, and J.-M. Drezet: J. Mater. Process. Technol., 2015, vol. 222, pp. 373–80.10.1016/j.jmatprotec.2015.03.029 ↗
14. K. Satoh: Trans. Jpn. Weld. Soc., 1972, vol. 3, pp. 125–34.
15. Z.L. Zhang, Ø. Gundersen, R. Aune, J. Ødegård, and Ø. Grong: Comput. Mater. Sci., 2005, vol. 34, pp. 35–45.10.1016/j.commatsci.2004.10.004 ↗
16. J. Lemaître and J.-L. Chaboche: Mechanics of Solid Materials, Cambridge University Press, Cambridge, UK, 1990.10.1017/CBO9781139167970 ↗
17. S. Denis, P. Archambault, E. Gautier, A. Simon, and G. Beck: J. Mater. Eng. Perform., 2002, vol. 11, pp. 92–102.10.1007/s11665-002-0014-2 ↗
18. O.R. Myhr, Ø. Grong, and S.J. Andersen, Acta Mater., 2001, vol. 49, pp. 65–75.10.1016/S1359-6454(00)00301-3 ↗
19. N. Chobaut: EPFL Ph.D. Thesis n°6559, 2015, DOI:10.5075/epfl-thesis-6559, http://infoscience.epfl.ch/record/205768/files/EPFL_TH6559.pdf.10.5075/epfl-thesis-6559 ↗
20. C. Zhang, M. Bellet, M. Bobadilla, H. Shen, and B. Liu: Metall. Mater. Trans. A, 2010, vol. 41, pp. 2304–17.10.1007/s11661-010-0310-7 ↗
21. S.G.R. Brown, J.D. James, and J.A. Spittle: Model. Simul. Mater. Sci. Eng., 1997, vol. 5, pp. 539–48.10.1088/0965-0393/5/6/001 ↗
22. S.D. Norris and I. Wilson: Model. Simul. Mater. Sci. Eng., 1999, vol. 7, pp. 297–309.10.1088/0965-0393/7/3/301 ↗
23. D.R. Pitts and L.E. Sissom: Theory and Problems of Heat Transfer, McGraw_Hill, New York, USA, 1977.
24. P. Pilvin and G. Cailletaud: Proceedings of the Second International Symposium on Inverse Problems, Edited by: H.D. Bui, M. Tanaka, M. Bonnet, H. Maigre, E. Luzzato, and M. Reynier, Balkema, 1994, pp. 79–86.
25. B. Magnin, L. Maenner, L. Katgerman, and S. Engler: Mater. Sci. Forum, 1996, vol. 217, pp. 1209–14.10.4028/www.scientific.net/MSF.217-222.1209 ↗
26. N. Chobaut, P. Saelzle, G. Michel, D. Carron, and J.-M. Drezet: JOM, 2015, vol. 67, pp. 984–90.10.1007/s11837-015-1363-2 ↗