Designing the Color of Hot-Dip Galvanized Steel Sheet Through Destructive Light Interference Using a Zn-Ti Liquid Metallic Bath
Source abstract
Abstract
The color of hot-dip galvanized steel sheet was adjusted in a reproducible way using a liquid Zn-Ti metallic bath, air atmosphere, and controlling the bath temperature as the only experimental parameter. Coloring was found only for sample s cooled in air and dipped into Ti-containing liquid Zn. For samples dipped into a 0.15 wt pct Ti-containing Zn bath, the color remained metallic (gray) below a 792 K (519 C) bath temperature; it was yellow at 814 K, violet at 847 K, and blue at 873 K. With the increasing bath temperature, the thickness of the adhered Zn-Ti layer gradually decreased from 52 to 32 micrometers, while the thickness of the outer TiO2 layer gradually increased from 24 to 69 nm. Due to small Al contamination of the Zn bath, a thin (around 2 nm) alumina-rich layer is found between the outer TiO2 layer and the inner macroscopic Zn layer. It is proven that the color change was governed by the formation of thin outer TiO2 layer; different colors appear depending on the thickness of this layer, mostly due to the destructive interference of visible light on this transparent nano-layer. A complex model was built to explain the results using known relationships of chemical thermodynamics, adhesion, heat flow, kinetics of chemical reactions, diffusion, and optics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Metallic Glasses and Amorphous Alloys · Pigment Synthesis and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. A.R. Marder: Prog. Mater. Sci., 2000, vol.45, pp. 191–27110.1016/S0079-6425(98)00006-1 ↗
2. A. Semoroz, L. Strezov, and M. Rappaz: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2695–70110.1007/s11661-002-0391-z ↗
3. A. Szabo, E. Denes: Mater. Sci. Forum, 2003, vol. 414-415, pp. 45-5010.4028/www.scientific.net/MSF.414-415.45 ↗
4. F.M.Bellhouse, A.I.M.Mertense, J.R.McDermid: Mater. Sci. Eng. A. 2007, vol. 463, pp. 147-5610.1016/j.msea.2006.09.117 ↗
5. S.Kaboli, J.R.McDermid: Metall. Mater. Trans. A., 2014, vol. 45A, pp. 3938-5310.1007/s11661-014-2359-1 ↗
6. H.Yang, S.Zhang, J.Li, Y.Liu, H.Wang: Surf. Coat. Technol. 2014, vol. 240, pp. 269-7410.1016/j.surfcoat.2013.12.040 ↗
7. S.M.A. Shibli, B.N.Meena, R.Remya: Surf. Coat. Technol, 2015, vol. 262, pp. 210-1510.1016/j.surfcoat.2014.12.054 ↗
8. G.Liu, J.Xing, S.Ma, Y.He, H.Fu, Y.Gao, Y.Wang, Y.Wang: Metall. Mater. Trans. A, 2015, vol.46, pp. 1900-0710.1007/s11661-015-2820-9 ↗
9. Y.Wang, J.Zeng: Mater. Design: 2015, vol. 69, pp. 64-6910.1016/j.matdes.2014.12.012 ↗
10. M.Panjan, M.Klanjsej Gunde, P.Panjan, M.Cekada: Surf. Coat. Technol., 2014, vol. 254, pp. 65-7210.1016/j.surfcoat.2014.05.065 ↗
11. J.Corredor, C.P.Bergmann, M.Pereira, L.F.P.Dick: Surf. Coat. Technol. 2014, vol. 245, pp. 125-3210.1016/j.surfcoat.2014.02.051 ↗
12. D.P.Adams, R.D.Murphy, D.J.Saiz, D.A.Hirschfeld, M.A:Rodriguez, P.G.Kouta, B.H.Jared: Surf. Coat. Technol., 2014, vol. 248, pp. 38-4510.1016/j.surfcoat.2013.12.052 ↗
13. R.W. Smyth: US patent 3530013, 1970
14. P. B. Philip, R. Zeliznak: US patent 37783l5, 1971
15. M.Tomita, S.Yamamoto: European patent EP0269005A2, 1987
16. M.Tomita, S.Yamamoto, C. Tominaga, K. Nakayama: British patent GB1243562, 1991
17. Q. C. Le, J.Z. Cui: Chin. J. Nonferr. Met., 1998, vol. 8, pp. 98-102
18. Q. C. Le, J. Z. Cui: Acta Metall. Sin., 1999, vol. 12, pp. 1217-22
19. Q. C. Le, J.Z. Cui, C.H. Hou: Chin. J. Nonferr. Met., 2000, vol. 10, pp. 388- 94
20. Q.C. Le, J.Z. Cui: Surf. Eng., 2008, vol. 24, pp. 57-6210.1179/174329407X265884 ↗
21. G. Lévai, M. Godzsák, A. Ender, R. Márkus, T.I. Török: Mater. Sci. Forum, 2013, vol. 729, pp. 61-6710.4028/www.scientific.net/MSF.729.61 ↗
22. Y.Wang, J.Zheng: Surf. Coat. Technol., 2014, vol. 245, pp. 55-6510.1016/j.surfcoat.2014.02.040 ↗
23. J.Emsley: The Elements. Clarendon Press, Oxford, 1989
24. T.Iida, R.I.L.Guthrie. The Physical Properties of Liquid Metals, Clarendon Press, Oxford, 1993
25. I.Barin. Thermochemical Properties of Pure Substances, VCh, 1993
26. T.B. Massalski ed.: Binary Alloy Phase Diagrams, 2nd ed., 3 volumes, ASM International, Materials Park, 1990
27. F.R.deBoer, R.Boom, W.C.M.Mattens, A.R.Miedema: Cohesion in Metals, North-Holland, Amsterdam, 1988
28. G.Kaptay: Calphad 2004, vol.28, pp. 115-2410.1016/j.calphad.2004.08.005 ↗
29. G.Kaptay: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 531-4310.1007/s11661-011-0902-x ↗
30. D.R.Poirier, G.H.Geiger: Transport Phenomena in Materials Processing, TMS, Warrendale, 1994
31. G.V.Samsonov (ed.): Fiziko-khimicheskie svoistva okislov—Moskva, Metallurgiia, 1978
32. B.Predel: Phase Equilibria, Crystallographic and Thermodynamic Data of Binary Alloys, vol 5 of group IV of Landolt-Börnstein Handbook, Springer-Verlag, Berlin, 1991-97
33. G.Kaptay: Materials equilibria in maco-, micro- and nano-system. Raszter Nyomda, 2011
34. G.Kaptay: J. Mater. Sci., 2005, vol. 40, pp. 2125-3510.1007/s10853-005-1902-2 ↗
35. G.Kaptay: J. Disp. Sci. Technol., 2012, vol. 33, pp. 130-4010.1080/01932691.2010.548232 ↗
36. G.Kaptay: Mater. Sci. Forum, 2005, vol. 473-474, pp. 1-1010.4028/www.scientific.net/MSF.473-474.1 ↗
37. G.Kaptay, E.Báder, L.Bolyán: Mater. Sci. Forum, 2000, vol. 329-330, pp. 151-5610.4028/www.scientific.net/MSF.329-330.151 ↗
38. Y.S.Touloukian, R.K.Kirby, R.E.Taylor, T.Y.R.Lee: Thermal Expansion, IFI/Plenum, NY, 197710.1007/978-1-4757-1631-3 ↗
39. G.Kaptay: Int. J. Mater Res., 2008, vol. 99, pp. 14-1710.3139/146.101600 ↗
40. W. Chen, L. Zhang, Y. Du, B. Huang: Phil. Mag., 2014, vol. 94, pp. 1552-7710.1080/14786435.2014.890755 ↗
41. G. Ábrahám ed.: Optics, Panem, McGraw-Hill, Budapest, 1998
42. S. Van Gils, P.Mas, E.Stijns, H.Terryn: Surf. Coat. Technol., 2004, vol. 185, pp. 303-1010.1016/j.surfcoat.2004.01.021 ↗