Evolution of Texture and Microstructure in Deformed and Annealed Copper-Iron Multilayer
Source abstract
Abstract
The effect of multiple phases on the evolution of texture during cold rolling and annealing of a copper-iron multilayer, fabricated by accumulative roll bonding, has been studied. The presence of an iron layer affects the deformation texture of the copper layer only at very large strains. On the other hand, a strong effect of copper on iron is observed at both small and large strains. At smaller strains, the larger deformation carried by the copper suppresses the texture development in the iron, whereas, at higher strains, selection of specific orientation relationship at the interface influences the texture of the iron layer. Shear banding and continuous dynamic recrystallization were found to influence the evolution of texture in the copper layer. The influence of large plastic deformation on the recrystallization behavior of copper is demonstrated with the suppression of typical fcc annealing texture components, described as constrained recrystallization. Evolution of typical annealing texture component is suppressed because of the multilayer microstructure. The plane of the interface formed during deformation is determined by a combination of the rolling texture of individual phases, constrained annealing, and the tendency to form a low-energy interface between the two phases during annealing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. S.C. Jha, R.G. Delagi, J.A. Forster and P.D. Kortz: Metall. Trans. A 1993, vol. 24, pp.15–20.10.1007/BF02669597 ↗
2. Y. Saito, H. Utsunomiya, N. Tsuji and T. Sakai: Acta Mater. 1999, vol. 47, pp.579–83.10.1016/S1359-6454(98)00365-6 ↗
3. N. Tsuji, R. Ueji and Y. Minamino: Scripta Mater. 2002, vol. 47, pp.69–76.10.1016/S1359-6462(02)00088-X ↗
4. Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai, and R.G. Hong: Scripta Mater. 1998, vol. 39, pp.1221–27.10.1016/S1359-6462(98)00302-9 ↗
5. S. I. Rao and P. M. Hazzledine: Philos. Mag. 2000, vol. 80, pp. 2011–40.10.1080/01418610008212148 ↗
6. P.M. Anderson, J.F. Bingert, A.Misra and J.P. Hirth: Acta Mater. 2003, vol. 51, pp.6059–75.10.1016/S1359-6454(03)00428-2 ↗
7. K. S. Suresh, S.Sinha, A. Chaudhury and S.Suwas: Mater. Charact. 2012, vol. 70, pp. 74–82.10.1016/j.matchar.2012.04.017 ↗
8. K.S. Suresh, A.D. Rollett, and S. Suwas: Metall. Mater. Trans. A 2013, vol. 44A, pp. 3866–3881.10.1007/s11661-013-1749-0 ↗
9. S.C.V. Lim and A.D. Rollett: Mater. Sci. Eng. A 2009, vol. 520, pp.189–96.10.1016/j.msea.2009.05.020 ↗
10. A. Misra, J.P. Hirth, and R.G. Hoagland: Acta Mater. 2005, vol. 53, pp.4817–24.10.1016/j.actamat.2005.06.025 ↗
11. A. Misra, R.G. Hoagland and H. Kunz: Philos. Mag. 2004, vol. 84, pp.1021–28.10.1080/14786430310001659480 ↗
12. D. Mitlin, A. Misra, T.E. Mitchell, J.P. Hirth and R.G. Hoagland: Philos. Mag. 2006, vol. 85, pp.3379–92.10.1080/14786430500145271 ↗
13. N. Li, J. Wang, A. Misra, and J.Y. Huang: Microsc. Microanal. 2012, vol. 18, pp. 1155–62.10.1017/S143192761200133X ↗
14. J.S. Carpenter, S.C. Vogel, J.E. Ledonne, D.L. Hammon, I.J. Beyerlein, and N.A. Mara: Acta Mater. 2012, vol. 60, pp.1576–86.10.1016/j.actamat.2011.11.045 ↗
15. B.L. Hansen, J.S. Carpenter, S.D. Sintay, C.A. Bronkhorst, R.J. McCabe, J.R. Mayeur, H.M. Mourad, I.J. Beyerlein, N.A. Mara, S.R. Chen and G.T. Gray III: Int J. Plast. 2012, vol. 49, pp.71–84.10.1016/j.ijplas.2013.03.001 ↗
16. S. Roy, S. Singh, S. Suwas, S. Kumar, and K. Chattopadhyay: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8469–78.10.1016/j.msea.2011.07.042 ↗
17. S.-B. Lee, J.E. LeDonne, S.C.V. Lim, I.J. Beyerlein and A.D. Rollett: Acta Mater. 2012, vol. 60, pp.1747–61.10.1016/j.actamat.2011.12.007 ↗
18. D. Raabe, J. Ball and G. Gottstein: Scripta Metall. Mater., 1992, vol. 27, pp. 211-216.10.1016/0956-716X(92)90115-U ↗
19. Ch. Hartig and H. Mecking: Comput. Mater. Sci. 2005, vol. 32, pp.370–77.10.1016/j.commatsci.2004.09.030 ↗
20. B. Commentz, Ch. Hartig and H. Mecking: Comput. Mater. Sci. 1999, vol. 16, pp.237–47.10.1016/S0927-0256(99)00066-X ↗
21. R.E. Bolmaro, R.A. Lebensohn and H.-G. Brokmeier: Comput. Mater. Sci. 1997, vol. 9, pp.237–50.10.1016/S0927-0256(97)00079-7 ↗
22. R.E. Bolmaro, R.V. Browning, F.M. Guerra and A.D. Rollett: Mater. Sci. Eng. A 1995, vol. 196, pp.53–63.10.1016/0921-5093(94)09682-1 ↗
23. R. E. Bolmaro, R. V. Browning, F. M. Guerra and A. D. Rollett: Mater. Sci. Eng. A 1994, vol. 175, pp.113–24.10.1016/0921-5093(94)91050-2 ↗
24. N.A. Mara, D. Bhattacharya, J.P. Hirth, P. Dickerson, and A. Misra: Appl. Phys. Lett., 2010, vol. 97, art. no. 021909.10.1063/1.3458000 ↗
25. K. Pawlik, J. Pospiech, and K. Lucke: Texture Microstruct., 1991, vol. 14–18, pp. 25–3010.1155/TSM.14-18.25 ↗
26. H. Jazaeri and F.J. Humphreys: Acta Mater. 2004, vol. 52, pp.3239–50.10.1016/j.actamat.2004.03.030 ↗
27. H. Jazaeri and F.J. Humphreys: Acta Mater. 2004, vol. 52, pp.3251–62.10.1016/j.actamat.2004.03.031 ↗
28. W. Skrotzki, N. Scheerbaum, C.-G. Oertel, R.Aruffat-Massion, S. Suwas, and. L.S. Toth: Acta Mater. 2007, vol. 55, pp. 2013–24.10.1016/j.actamat.2006.11.005 ↗
29. A. Bhowmik, S. Biswas, S. Suwas, R.K. Ray and D. Bhattacharjee: Metall. Mater. Trans. A 2009, vol. 40A, pp. 2729–42.10.1007/s11661-009-9939-5 ↗
30. A. Sarkar, A. Bhowmik and S. Suwas: Appl. Phys. A 2009, vol. 94, pp. 943–48.10.1007/s00339-008-4870-y ↗
31. S.-R. Chen and U.F. Kocks: Scripta Metall. Mater. 1992, vol. 27, pp. 1587–92.10.1016/0956-716X(92)90149-9 ↗
32. N.P. Gurao: PhD. Thesis, Indian Institute of Science, Bangalore, 2010, pp. 106–33.
33. T. Leffers and R K Ray: Prog. Mater. Sci. 2009, vol. 54, pp.351–96.10.1016/j.pmatsci.2008.09.002 ↗
34. J.S. Kallend and G.J. Davis: Philos. Mag. 1972, vol. 25, pp. 471–90.10.1080/14786437208226817 ↗
35. T. Leffers: Phys. Stat. Sol. 1968, vol. 25, pp. 337–44.10.1002/pssb.19680250133 ↗
36. H. Honneff and H. Mecking (1978) In: G. Gottstein, K. Lucke (Eds) 5th International Conference on Texture of Materials. Springer, Berlin.
37. Y. Zhou, L.S. Tóth and K. W. Neale: Acta Metall. Mater. 1992, vol. 40, pp.3179–93.10.1016/0956-7151(92)90481-S ↗
38. A. Creuziger, L. Hu, T. Gnaeupel-Herold, A.D. Rollett: Integr. Mater. Manuf. Innov. 2014, vol. 3, pp. 1–19.10.1186/2193-9772-3-1 ↗
39. T. Senuma, H. Yada, R. Shimizu and J. Harase: Acta Metall. 1990, vol. 38, pp.2673–81.10.1016/0956-7151(90)90281-K ↗
40. H. Inagaki: ISIJ Int. 1994, vol. 34, pp. 313–21.10.2355/isijinternational.34.313 ↗
41. R.K. Ray, J.J. Jonas, and R.E. Hook: Int. Mater. Rev. 1994, vol. 39, pp.129–72.10.1179/imr.1994.39.4.129 ↗
42. D.A. Hughes and N. Hansen. (1994) In: J.J. Jonas, T.R. Bieler and K.J. Bowman (eds) Advances in Hot deformation textures and microstructures. TMS, Warrendale, p. 427.
43. L.S. Toth, J.J. Jonas, D. Daniel and R.K. Ray: Metall. Trans. A 1990, vol. 21, pp.2985–3000.10.1007/BF02647219 ↗
44. J.L. Raphanel and P. Van Houtte: Acta Metall. 1985, vol. 33, pp.1481–88.10.1016/0001-6160(85)90049-5 ↗
45. M.R. Barnett and J.J. Jonas: ISIJ Int. 1997, vol. 37, pp.706–14.10.2355/isijinternational.37.706 ↗
46. F. Emren, U. Van Schlippenbach and K. Lucke, Acta Metall. 34 (1986) pp.2105–17.10.1016/0001-6160(86)90156-2 ↗
47. R. Saha and R.K. Ray, ISIJ Int. 48 (2008) pp.976–83.10.2355/isijinternational.48.976 ↗
48. R. Saha and R.K. Ray, Metall. Mater. Trans. A 40A (2009) pp.2160–70.10.1007/s11661-009-9901-6 ↗
49. R. Saha and R.K. Ray, Scripta Mater. 57 (2007) pp.841–4.10.1016/j.scriptamat.2007.06.064 ↗
50. R.A. Lebensohn and T. Leffers: Textures Microstruct., 1999, vol. 31, pp.217–30.10.1155/TSM.31.217 ↗
51. M.R. Barnett and J.J. Jonas: ISIJ Int. 1997, vol. 37, pp.697–705.10.2355/isijinternational.37.697 ↗
52. J.K. Farrer, J.R. Michael, and C.B. Carter: in Electron Back Scattered Diffraction in Materials Science, A.J. Schwartz, M. Kumar, and B.L. Adams, eds., Kluwer publications, New York, 2000, pp. 308–12.