Antimony-induced embrittlement of [011] symmetric tilt boundaries in copper bicrystals
Source abstract
Abstract
Copper bicrystals with different [011] symmetric tilt boundaries doped with Sb were tensile tested at several temperatures from 77 to 773 K. The fracture behavior was sensitive to the misorientation angle, Sb doping time, and test temperature. Grain boundaries were more embrittled with increasing the Sb doping time, though their tendency was also dependent on the misorientation angle. The degree of embrittlement of grain boundaries became lower as the test temperature increased to about 500 K, while it became higher again at higher temperatures. The segregation of Sb at [011] tilt boundaries also was systematically measured by energy-dispersive X-ray spectroscopy. A strong correlation was found among the fracture behavior at 77 and 773 K, grain-boundary segregation level of Sb, and grain-boundary energy before Sb doping: a higher-energy boundary has a higher level of Sb segregation and fractures more easily at a lower tensile stress.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: X-ray Diffraction in Crystallography · Nuclear Physics and Applications · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. P. Lejcek and S. Hofmann: Crit. Rev. Solid State Mater. Sci., 1995, vol. 20, pp. 1–85.10.1080/10408439508243544 ↗
2. L.M.T. Hopkin: J. Inst. Met., 1995, vol. 84, pp. 102–08.
3. T.H. Chuang, W. Gust, L.A. Heldt, M.B. Hintz, S. Hofmann, R. Lucic, and B. Predel: Scripta Metall., 1982, vol. 16, pp. 1437–41.10.1016/0036-9748(82)90442-2 ↗
4. A. Roy, U. Erb, and H. Gleiter: Acta Metall., 1982, vol. 30, pp. 1847–50.10.1016/0001-6160(82)90024-4 ↗
5. J.D. Russel and A.T. Winter: Scripta Metall., 1985, vol. 19, pp. 575–79.10.1016/0036-9748(85)90340-0 ↗
6. H. Miura, T. Yoshida, T. Sakai, M. Kato, and T. Mori: J. Jpn. Inst. Met., 1993, vol. 57, pp. 479–85.10.2320/jinstmet1952.57.5_479 ↗
7. H. Miura, H. Nakata, T. Sakai, M. Kato, and T. Mori: J. Jpn. Inst. Met., 1994, vol. 58, pp. 477–82.10.2320/jinstmet1952.58.5_477 ↗
8. H. Miura, H. Nakata, M. Kato, and T. Mori: Appl. Phys. Lett., 1994, vol. 65, pp. 705–07.10.1063/1.112275 ↗
9. G.H. Li and L.D. Zhang: Scripta Metall., 1995, vol. 32, pp. 1335–40.10.1016/0956-716X(95)00167-T ↗
10. R. Monzen, T. Kuze, T. Okamoto, and H. Miura: Metall. Mater. Trans. A., 1999, vol. 30A, pp. 483–85.10.1007/s11661-999-0338-8 ↗
11. H. Miura, M. Kato, and T. Mori: J. Phys. Paris, 1990, vol. 51, C1-263–C1-268.10.1051/jphyscol:1990141 ↗
12. T. Mori, H. Miura, T. Tokita, J. Haji, and M. Kato: Phil. Mag. Lett., 1988, vol. 58, pp. 11–15.10.1080/09500838808214724 ↗
13. T.B. Massalski: Binary Alloy Phase Diagrams, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 1996, vol. 2, pp. 1471–73.
14. B.S. Bokshteyn, G.S. Nikol'skiy, and A.N. Smirnov: Phys. Met. Metallography, 1991, vol. 72, pp. 142–46.
15. M. Menyhard, B. Blum, and C.J. McMahon, Jr.: Acta Metall., 1989, vol. 37, pp. 549–57.10.1016/0001-6160(89)90238-1 ↗
16. H.R. Tipler and D. McLean: Met. Sci. J., 1970, vol. 4, pp. 103–20.10.1179/030634570790444176 ↗
17. D.G. Brandon, B. Ralph, S. Ranganathan, and M.S. Wald: Acta Metall., 1964, vol. 12, pp. 813–21.10.1016/0001-6160(64)90175-0 ↗
18. M.C. Inman, D. McLean, and H.R. Tipler: Proc. R. Soc. London, 1963, vol. 273A, pp. 538–57.
19. H. Miura, M. Kato, and T. Mori: J. Mater. Sci. Lett., 1994, vol. 13, pp. 46–48.10.1007/BF02352916 ↗
20. H. Miura, X. Tong, M. Kato, and T. Mori: J. Jpn. Inst. Met., 1990, vol. 54, pp. 1165–70.10.2320/jinstmet1952.54.11_1165 ↗
21. P.R. Messmer and L.C. Briant: Acta Metall., 1982, vol. 30, pp. 457–67.10.1016/0001-6160(82)90226-7 ↗
22. M. Menyhard, B. Blum, C.J. McMahon, Jr., S. Chikwambani, and J. Weertman: J. Phys., 1988, vol. 49, pp. C5-457–C5-462.
23. D.E. Luzzi: Phil. Mag. Lett., 1991, vol. 6, p. 281–87.10.1080/09500839108214656 ↗