journal article·2013-10

Mechanics of Intermittent Plasticity Punctuated by Fracture During Shear Deformation of Mg Alloys at Near-Ambient Temperatures

Saurabh Basu, Sepideh Abolghasem, M. Ravi Shankar

Publisher page

Abstract

Microstructure evolution of basal-textured Mg alloy AZ31B (Mg: Al: Zn; 96: 3: 1 wt pct) during simple shear deformation at near-ambient temperatures was studied by plane-strain machining. Using Schmid factor calculations in conjunction with quantitative electron microscopy, it was found that plastic deformation in AZ31B in the primary deformation zone of machining commences by extension twinning followed by basal slip. Characteristics of twinning in individual grains were described by correlating the direction of twinning with the principal stress state. The implications of these deformation mechanics for the microstructure inherited by the freshly generated surfaces in shear-based material removal processes are examined. These include the identification of extensive surface texture reorientation at machined surfaces via extension twins, limits on surface integrities wrought by fracture events that punctuate plastic deformation, and their relationship to the cutting tool geometry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. F. Witte, J. Fischer, J. Nellesen, H.A. Crostack, V. Kaese, A. Pisch, F. Beckmann., H. Windhagen: Biomaterials, 2006, vol. 27, pp. 1013–1018.10.1016/j.biomaterials.2005.07.037 ↗
2. J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama, K. Higashi: Acta Mater., 2003, vol. 51, pp. 2055-2065.10.1016/S1359-6454(03)00005-3 ↗
3. F. Kang, J.T. Wang, Y. Peng: Mat. Sci. Eng., A, 2008, vol. 487, pp. 68-73.10.1016/j.msea.2007.09.063 ↗
4. H.T. Friedrich, B.L. Mordike: Magnesium Technology - Metallurgy, Design Data, Applications, Springer-Verlag, Germany, 2006.
5. M.C. Shaw: Metal Cutting Principles, Oxford University Press, Inc., New York, 2005.
6. S. Abolghasem, S. Basu, S. Shekhar, J. Cai, M.R. Shankar: Acta Mater., 2012, vol. 60, pp. 376-386.10.1016/j.actamat.2011.09.055 ↗
7. M.R. Shankar, S. Chandrasekar, W.D. Compton, A.H. King: Mat. Sci. Eng., A, 2005, vol. 410–411, pp. 364–368.10.1016/j.msea.2005.08.137 ↗
8. M.R. Shankar, B.C. Rao, S. Lee, S. Chandrasekar, A.H. King, W.D. Compton: Acta Mater., 2006, vol. 54, pp. 3691-3700.10.1016/j.actamat.2006.03.056 ↗
9. A.A. Lipatov: Russian Engineering Research, 2008, vol. 28, pp. 904-905.10.3103/S1068798X08090165 ↗
10. Z. Pu, S. Yang, G.L. Song, O.W.D. Jr., D.A. Puleo, and I.S. Jawahir: Scripta Mater., 2011, vol. 65, pp. 520–23.10.1016/j.scriptamat.2011.06.013 ↗
11. R. Calistes, S. Swaminathan, T.G. Murthy, C. Huang, C. Saldana, M.R. Shankar, S. Chandrasekar: Scr. Mater., 2009, vol. 60, pp. 17-20.10.1016/j.scriptamat.2008.08.027 ↗
12. A. Jain, O. Duygulu, D.W. Brown, C.N. Tom′e, S.R. Agnew: Mater. Sci. Eng. A, 2008, vol. 486, pp. 545-555.10.1016/j.msea.2007.09.069 ↗
13. H. Yang, S. Yin, C. Huang, Z. Zhang, S. Wu, S. Li, Y. Liu: Adv. Eng. Mater., 2008, vol. 10, pp. 955-960.10.1002/adem.200800111 ↗
14. M.D. Nave, M.R. Barnett: Scr. Mater., 2004, vol. 51, pp. 881-885.10.1016/j.scriptamat.2004.07.002 ↗
15. C.J. Boehlert, Z. Chen, I.G. Urrutia, J. Llorca, M.T.P. Prado: Acta Mater., 2012, vol. 60, pp. 1889-1904.10.1016/j.actamat.2011.10.025 ↗
16. S.G. Hong, S.H. Park, C.S. Lee: Acta Mater., 2010, vol. 58, pp. 5873-5885.10.1016/j.actamat.2010.07.002 ↗
17. C. Huang, T.G. Murthy, M.R. Shankar, R.M. Saoubi, S. Chandrasekar: Scr. Mater., 2008, vol. 58, pp. 663-666.10.1016/j.scriptamat.2007.11.042 ↗
18. E. Peli: J. Opt. Soc. Am. A, 1990, vol. 7, pp. 2032-2042.10.1364/JOSAA.7.002032 ↗
19. S. Godet, L. Jiang, A.A. Luo, J.J. Jonas: Scr. Mater., 2006, vol. 55, pp. 1055-1058.10.1016/j.scriptamat.2006.07.059 ↗
20. E. Tenckhoff: ASTM Spec. Tech. Publ. (STP), 1988, vol. 966, p. 23.
21. B.A. Bilby, A.G. Crocker: Proc. R. Soc. A, 1965, vol. 288, pp. 240-255.10.1098/rspa.1965.0216 ↗
22. M.R. Barnett, M.D. Nave, C.J. Bettles: Mater. Sci. Eng., A, 2004, vol. 386, pp. 205-211.10.1016/S0921-5093(04)00942-6 ↗
23. S.R. Agnew, J.A. Horton, T.M. Lillo, D.W. Brown: Scr. Mater., 2004, vol. 50, pp. 377-381.10.1016/j.scriptamat.2003.10.006 ↗
24. C.E. Dreyer, W.V. Chiu, R.H. Wagoner, S.R. Agnew: J. Mater. Process. Technol., 2010, vol. 210, pp. 37-47.10.1016/j.jmatprotec.2009.08.022 ↗
25. C. Wiesner: Metall. Mater. Trans. A, 1992, vol. 23, pp. 989-996.10.1007/BF02675573 ↗
26. R.A. Lebensohn, C.N. Tom′e: Philos. Mag. A, 1993, vol. 67, pp. 187-206.10.1080/01418619308207151 ↗
27. S. Gollapudi, M.A. Azeem, A. Tewari, U. Ramamurty: Scr. Mater., 2011, vol. 64, pp. 189-192.10.1016/j.scriptamat.2010.09.041 ↗
28. S.K. As, B. Skallerud, B.W. Tveiten, B. Holme: Int. J. Fatigue, 2005, vol. 27, pp. 1590–1596.10.1016/j.ijfatigue.2005.07.031 ↗