journal article·2012-06Open access

Austenite Grain Growth in Peritectic Solidified Carbon Steels Analyzed by Phase-Field Simulation

Munekazu Ohno, Shingo Tsuchiya, Kiyotaka Matsuura

Abstract

Formation of coarse columnar grains (CCG) in as-cast austenite structure of peritectic carbon steels is one of the serious problems in continuous casting processes. It was recently elucidated that the formation of CCG is ascribed to a discontinuous grain growth. Furthermore, the critical condition for the discontinuous growth to occur was elicited on the basis of phase field simulations and a theory of grain growth. In this study, by means of the phase field simulations, the detailed investigation is carried out for grain coarsening of as-cast austenite structure. It is demonstrated in the two-dimensional simulations that the coarsest grain structure emerges by the discontinuous growth in the vicinity of the critical condition. In addition, a model for predicting the upper limit of grain size during the discontinuous growth is proposed. The model successfully describes the experimental result with reasonable accuracy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. L. Schmidt and Å. Josefsson: Scand. J. Metall., 1974, vol. 3, pp. 193–99.
2. B. Mintz and J.M. Arrowsmith: Met. Technol., 1979, vol. 6, pp. 24–32.10.1179/030716979803276471 ↗
3. Y. Maehara, K. Yasumoto, Y. Sugitani, and K. Gunji: Trans. ISIJ, 1985, vol. 25, pp. 1045–52.10.2355/isijinternational1966.25.1045 ↗
4. D.N. Crowther and B. Mintz: Mater. Sci. Technol., 1986, vol. 2, pp. 951–55.10.1179/026708386790219543 ↗
5. N. Yoshida, O. Umezawa, and K. Nagai: ISIJ Int., 2004, vol. 44, pp. 547–55.10.2355/isijinternational.44.547 ↗
6. H.S. Kim, Y. Kobayashi, and K. Nagai: Acta Mater., 2006, vol. 54, pp. 2441–49.10.1016/j.actamat.2006.01.024 ↗
7. C. Bernhard, J. Reiter, and H. Presslinger: Metall. Mater. Trans. B, 2008, vol. 39B, pp. 885–95.10.1007/s11663-008-9197-8 ↗
8. N. Yoshida, Y. Kobayashi, and N. Nagai: Tetsu-to-Hagané, 2004, vol. 90, pp. 198–205.10.2355/tetsutohagane1955.90.4_198 ↗
9. V. Karlinski de Barcellos, V. Lopes da Silva Gschwenter, H. Kytönen, C. Alexandre dos Santos, J. Alvares Spim, S. Louhenkilpi, and J. Miettinen: Steel Res. Int., 2010, vol. 81, pp. 461–71.10.1002/srin.201000026 ↗
10. J. Reiter, C. Bernhard, and H. Presslinger: Mater. Charact., 2008, vol. 59, pp. 737–46.10.1016/j.matchar.2007.06.003 ↗
11. S. Tsuchiya, M. Ohno, K. Matsuura, and K. Isobe: Acta Mater., 2011, vol. 59, pp. 3334–42.10.1016/j.actamat.2011.02.007 ↗
12. M. Ohno, S. Tsuchiya, and K. Matsuura: Acta Mater., 2011, vol. 59, pp. 5700–09.10.1016/j.actamat.2011.05.045 ↗
13. I. Steinbach and F. Pezzola: Physica D, 1999, vol. 134, pp. 385–93.10.1016/S0167-2789(99)00129-3 ↗
14. S.G. Kim, D.I. Kim, W.T. Kim, and Y.B. Park: Phys. Rev. E, 2006, vol. 74, pp. 061605-1–061605-14.10.1103/PhysRevE.74.061605 ↗
15. E.D. Hondros: Proc. R. Soc. London A, 1965, vol. 286, pp. 479–98.10.1098/rspa.1965.0158 ↗
16. M. Apel, B. Böttger, J. Rudnizki, P. Schaffnit, and I. Steinbach: ISIJ Int., 2009, vol. 49, pp. 1024–29.10.2355/isijinternational.49.1024 ↗
17. M. Hillert: Acta Metall., 1965, vol. 13, pp. 227–38.10.1016/0001-6160(65)90200-2 ↗
18. E.A. Holm, N. Zacharopoulos, and D.J. Srolovitz: Acta Mater., 1998, vol. 46, pp. 953–64.10.1016/S1359-6454(97)00307-8 ↗
19. CompuTherm LLC, http://www.computherm.com/.
20. S. Tsuchiya, M. Ohno, and K. Matsuura: Acta Mater., 2012, in print.