journal article·2013-08

Mechanical and Electrochemical Behavior of a High Strength Low Alloy Steel of Different Grain Sizes

K. S. Ghosh, D. K. Mondal

Publisher page

Abstract

Various heat treatments applied to a fine-grained high strength low alloy (HSLA) steel resulted in producing different grain sizes. Optical and scanning electron microstructures of the different alloy states exhibited varying ferrite grains which have increased with the increase of annealing time and decrease of cooling rates. TEM structures of the as-received HSLA steel displayed characteristics microstructural features, distribution, and morphology of microalloy precipitates. Hardness and tensile strength values have decreased with the increase of grain sizes. Potentiodynamic electrochemical polarization of the different alloy states in 3.5 wt pct NaCl solution showed typical active metal/alloy behavior. Tensile specimens of the as-received and heat-treated alloy cathodically charged with hydrogen, followed by tensile testing, did not indicate any noticeable loss of ductility. FESEM fractographs of hydrogen-charged samples showed a few chain of voids in the presence of cup and cone ductile fracture features in tensile-tested samples without hydrogen charging as well.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. B.Q. Han, S. Ye: J. Mater. Process. Technol., 2003, vol. 136, 100-04.10.1016/S0924-0136(02)01014-2 ↗
2. R. Song, D. Ponge, D. Rabbe, R. Kaspar: Acta Mater., 2005, vol 53, 845-58.10.1016/j.actamat.2004.10.051 ↗
3. C. Quchi: International Forum on Creation of Superplastic Materials Consisting of Amorphous, Nano-Scale, Mesoscopic Structures (FCSMM), Tokyo, 1997, p 31.
4. R.K. Gibbs, P.D. Hodgson, and B.A. Parker: in Morris E First Symposium, P.K. Law, J.R. Weertmann, H.L. Marcus, and J.S. Santer, eds., Warraendale, PA, 1991, p. 73.
5. K.S. Ghosh, N. Gao and M.J. Starink: Mater. Sci. Eng., 2012, vol. A552, 164-71.10.1016/j.msea.2012.05.026 ↗
6. R.Z. Valiev and T.G. Langdon: Prog. Mater. Sci., 2006, vol. 51, 881–981.10.1016/j.pmatsci.2006.02.003 ↗
7. S. Saito, N. Tsuji, H. Utsunomiya, T Sakai, R.G. Hong: Scripta Mater, 1998, vol. 39, 1221-27.10.1016/S1359-6462(98)00302-9 ↗
8. A. Belyakov, Y. Sakai, T Hara, Y. Kimura, and K. Tsuzaki: Metall. Mater. Trans., 2001, vol. 32A, 1769–76.10.1007/s11661-001-0153-3 ↗
9. M.J. Starink, X.G. Qiao, J. Zhang, N. Gao: Acta Mater., 2009, vol. 57, 5796-811.10.1016/j.actamat.2009.08.006 ↗
10. C. Lesch, P. Alvarez, W. Bleck and J. Giil Sevillano: Metall. Mater. Trans., 2007, vol. 38A, 1882-90.10.1007/s11661-006-9052-y ↗
11. S.J. Oh, D.C. Cook, H.E. Townsend: Corrosion Sci. 1999, vol. 41, 1687-702.10.1016/S0010-938X(99)00005-0 ↗
12. S.B. Lalvani, G Zhang: Corrosion Sci., 1995, vol. 37, 1567-82.10.1016/0010-938X(95)00066-S ↗
13. G.P Tiwari, A. Bose, J.K. Chakravarty, S.L. Wadekar, M.K. Totlani, R.N. Arya, R.K. Fotedar: Mater. Sci. Eng., 2006, vol. A286, 269-381.
14. R.A. Siddiqui and H.A. Abdulah: J. Mater. Proc. Technol., 2005, vol. 170, pp. 430–35.10.1016/j.jmatprotec.2005.05.024 ↗
15. K. Banerjee and U.K. Chatterjee: ISIJ Int., 1999, vol. 39, 47-65.10.2355/isijinternational.39.47 ↗
16. Gu, B., Luo, J., Mao, X.: Corrosion 1999, vol. 55, 96-106.10.5006/1.3283971 ↗
17. J.G. Gonzalez-Rodriguez, M. Casales, V.M. Salinas-Bravo: Corrosion, 2002, vol. 58, 584-90.10.5006/1.3277649 ↗
18. R.N. Perkins: Corrosion, 1996, vol. 52, 363-74.10.5006/1.3292124 ↗
19. Y.F. Cheng: Electrochem. Acta, 2007, vol. 52, 2661-67.10.1016/j.electacta.2006.09.024 ↗
20. P. Liang, X. Ii, C. Du, X. Chen: Mater. Des., 2009, vol. 30, 1712–17.10.1016/j.matdes.2008.07.012 ↗
21. C.F. Dong, X.G. Li, Z.Y. Liu, Y.R. Zhang, J. Alloys Compd., 2009, vol. 484, 966-72.10.1016/j.jallcom.2009.05.085 ↗
22. S.M. Lee, J.Y. Lee, Acta Metall., 1987, vol. 35, 2695-700.10.1016/0001-6160(87)90268-9 ↗
23. G.M. Pressouyre, I. Bernstein, Metall. Trans. A, 1978, vol. 10, 1571–80.10.1007/BF02661939 ↗
24. F.G. Wei, K. Tsuzaki, Metall. Mater. Trans. A, 2004, vol. 35A, 3155-63.10.1007/s11661-004-0060-5 ↗
25. N. Yazdipour, A.J. Haq, K. Muzaka and E. Pereloma, Comput. Mater. Sci., 2012, vol. 56, 49-57.10.1016/j.commatsci.2012.01.003 ↗
26. S. Serna, H. Martínez, S.Y. López, J.G. González-Rodríguez, J.L. Albarrán, Int. J Hydrogen Energy, 2005, vol. 30, 1333-38.10.1016/j.ijhydene.2005.04.012 ↗
27. D. Hejazi, A.J. Haq, N. Yazdipour, D.P. Dunne, A. Calka, F. Barbaro, E.V. Pereloma, Mater. Sci. Eng. A, 2012, vol. 551, 40–49.10.1016/j.msea.2012.04.076 ↗
28. P. Lowmunkhong, D. Ungthararak, P. Sutthivaiyakit: Corrosion Sci., 2010, vol. 52, 30-38.10.1016/j.corsci.2009.08.039 ↗
29. N. Labjar, M. Lebrini, F. Bentiss, N.-E. Chihib, S. El Hajjaji, C. Jama: Mater. Chem. Phys., 2010, vol. 119, 330-36.10.1016/j.matchemphys.2009.09.006 ↗
30. S.G. Wang, C.B. Shen, K. Long, H.Y. Yang, F.H. Wang, Z.D. Zhang: J. Phys Chem, 2005, vol. B109, 2499-503.10.1021/jp046297v ↗
31. Y.H. Jang, S.S. Kim, C.D. Yim, C.G. Lee, S.J. Kim: Corrosion Eng. Sci. Technol., 2007, vol. 42, 119-22.10.1179/174327807X196834 ↗
32. H.H. Hassan, E. Abdelghani, M.A. Amin: Electrochem. Acta, 2007, vol. 52, 6359-66.10.1016/j.electacta.2007.04.046 ↗
33. K.D. Ralston and N. Birbilis: Corrosion, 2010, vol. 66, 1-13.10.5006/1.3462912 ↗
34. S.G. Wang, C.B. Shen, K. Long, H.Y. Yang, F.H. Wang, Z.D. Zhang: J. Phys Chem, 2006, vol. B110, 377-82.10.1021/jp0538971 ↗
35. B. Hadzima, M. Janecek, H. Estrin, H.S. Kim: Mater. Sci. Eng. A, 2007, vol. 462, 243-47.10.1016/j.msea.2005.11.081 ↗
36. G. Song, A. Atrens, M Dargusch: Corro Sci, 1999, vol. 41, 249-73.10.1016/S0010-938X(98)00121-8 ↗
37. V.S. Saji, J. Thomas, Curr. Sci., 2007, vol. 92, 51-55.
38. X.H. Chen, L. Lu, Scripta Mater. 57 (2007) 133–36.10.1016/j.scriptamat.2007.03.029 ↗
39. Y. Bergström, H. Hallen (1983) Met. Sci. J. 17, 341–47.10.1179/030634583790420808 ↗
40. F.B. Pickering, Mater. Sci. Technol. 7 (1992) 335–39.
41. W.B. Morrison, Trans. ASM 59 (1966) 824–46.
42. H. Takechi: Proceedings of the Conference International Symposium on Modern LC and ULC Sheet Steels for Coldforming: Processing and Properties the Properties and Applications of IF Steels, Aachen, 1998, pp. 133–44.
43. A. Saha, D.K. Mondal, J. Maity: Mater. Sci. Eng., 2010, vol. A527, 4001-007.10.1016/j.msea.2010.03.003 ↗
44. K.S. Jacob and G. Parameswaran, Corrosion Sci., 2010, vol. 52, 224-28.10.1016/j.corsci.2009.09.007 ↗
45. N.D. Nam, M.J. Kim, Y.W. Jang, J.G. Kim: Corrosion Sci., 2010, vol. 52, 14-23.10.1016/j.corsci.2009.08.036 ↗
46. V. Afshari, C. Dehghanian: J. Solid State Electrochem., 2010, vol. 14, 1855-62.10.1007/s10008-010-1066-0 ↗
47. D.A. Jones, Principles and Prevention of Corrosion, 1996, Prentice-Hall, New Jersey.
48. T.J. Carter, L.A. Cornish: Eng. Fail. Anal., 2001, vol. 8, 113-21.10.1016/S1350-6307(99)00040-0 ↗
49. L. Niu, Y.F. Cheng: Appl. Surf. Sci., 2007, vol. 253, 8626-31.10.1016/j.apsusc.2007.04.066 ↗
50. R.A. Oriani: Annu. Rev. Mater. Sci., 1978, vol. 8, 327–57.10.1146/annurev.ms.08.080178.001551 ↗
51. V.E. Atrens: Eng. Fail. Anal. 2008, vol. 15, 617-41.10.1016/j.engfailanal.2007.10.004 ↗
52. H.J. Maier, W. Popp, H Kaesche: Acta Metall., 1987, vol. 35, 875-80.10.1016/0001-6160(87)90164-7 ↗
53. V.A. Marichez: Prot. Met, 1980, vol. 16, p. 427.10.1049/el:19800299 ↗
54. L. Coudreuse, J. Charles: Corrosion Sci., 1987, vol. 27, 1169-81.10.1016/0010-938X(87)90106-5 ↗
55. R.A. Oriani, P.H. Josephic: Metall. Trans. A, 1980, vol. 11A, 1809–820.10.1007/BF02655096 ↗
56. M.G. Fontana (2005) Corrosion Engineering. McGraw-Hill, New York, p. 145.
57. R Gibala and R.F. Hehnemann: Hydrogen Embrittlement and Stress Corrosion Cracking, ASM Handbook 13, Materials Park, OH, 1984.
58. H. Najafi, J. Rassizadehghani, S. Asgari: Mater. Sci. Eng. 2008, vol. A486, 1–7.10.1016/j.msea.2007.08.057 ↗
59. E. Villalba and A. Atrens: Eng. Fail. Anal., 2009, vol. 16, 164-75.10.1016/j.engfailanal.2008.01.004 ↗
60. Zhang, L., Li X., Du C., Huang Y.: J. Chin. Soc. Corrosion Prot., 2009, vol. 29, 353-59.