Phase transformation-induced grain refinement in rapidly solidified ultra-high-carbon steels
Source abstract
Abstract
Superplastic forming offers a promising approach for reducing the cost of high-performance metal components with complex shapes. Severe thermomechanical deformation is one method for producing the fine grain structure needed to permit superplastic forming economically. Our approach to generating fine-grained microstructures is by cyclic heat treatment of rapidly solidified material. First, a metastable structure is produced by rapid quenching of the liquid metal. Then, solid-state phase transformations at modest temperatures are employed to refine this structure. In the ultra-high-carbon steels (UHCS) studied, the brittle as-cast structure of martensite and austenite was transformed, after cyclic heat treatment, to a ductile mixture of 1-µm ferrite and 0.25-µm carbide. Varying the heat-treat temperatures by 100 °C within the transformation range had little effect on the scale of the microstructure. Higher C resulted in coarser carbide spheroids, addition of Al refined the microstructure, and the finest mean carbide size was obtained with an intermediate level (5 pct) of Cr. Refinement of the martensite plates retained austenite via cyclic tempering and austenitization was found to be the key step in the overall mechanism for phase transformation-induced grain refinement in rapidly solidified UHCS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. D.R. Lesuer, C.K. Syn, A. Goldberg, J. Wadsworth, and O.D. Sherby: JOM, 1993, pp. 40–46.10.1007/BF03222405 ↗
2. O.D. Sherby, B. Walser, C.M. Young, and E.M. Cady: Scripta Metall., 1975, vol. 9, pp. 569–74.10.1016/0036-9748(75)90352-X ↗
3. O.D. Sherby, T. Oyama, D.W. Kum, B. Walser, and J. Wadsworth: J. Met., 1985, pp. 50–6.10.1007/BF03257713 ↗
4. E.S. Kayali, H. Sunada, T. Oyama, J. Wadsworth, and O.D. Sherby: J. Mater. Sci., 1979, vol. 14, pp. 2688–92.10.1007/BF00610640 ↗
5. C.K. Syn, D.R. Lesuer, and O.D. Sherby: Metall. Trans. A, 1994, vol. 25A, pp. 1481–93.10.1007/BF02665480 ↗
6. R.D. Caligiuri, R.T. Whalen, and O.D. Sherby: Int. J. Powder Metall. Powder Technol., 1976, vol. 12, pp. 9–16.
7. O.C. Ruano, L.E. Eiselstein, and O.D. Sherby: Metall. Trans. A, 1982, vol. 13A, pp. 1785–92.10.1007/BF02647834 ↗
8. K. Isonishi and M. Tokizane: Int. J. Powder Metall., 1989, vol. 25, pp. 187–94.
9. R.A. Grange: Metall. Trans., 1971, vol. 2, pp. 65–78.10.1007/BF02662639 ↗
10. S. Kavesh: in Metallic Glasses, J.J. Gilman and H.J. Leamy, eds., ASM, Metals Park, OH, 1978, p. 37.
11. P. Duwez: ASM Trans., 1967, vol. 60, p. 607.
12. K.P. Cooper, J.D. Ayers, H.N. Jones, and R. Vardiman: in Microstructural Science Volume 25, Proc. 30th Annual Technical Meeting of the International Metallographic Society, D.E. Alman, J.A. Hawk, and J.W. Simmons, ASM INTERNATIONAL, Materials Park, OH, 1998, pp. 311–17
13. K.P. Cooper and H.N. Jones: J. Mater. Sci., 2001, vol. 36, pp. 1–9.10.1023/A:1012434926602 ↗
14. J. Wadsworth and O.D. Sherby: J. Mater. Sci., 1978, vol. 13, pp. 2645–49.10.1007/BF02402751 ↗
15. B. Walser and O.D. Sherby: Metall. Trans. A, 1979, vol. 10A, pp. 1461–71.10.1007/BF02812011 ↗
16. G.R. Speich and W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 1043–54.10.1007/BF02642436 ↗
17. D.W. Kum: in Thermomechanical Processing and Mechanical Processing of Hypereutectoid Steels and Cast Irons, D.R. Lesuer, C.K. Syn, and O.D. Sherby, eds., TMS, Warrendale, PA, 1997, pp. 41–53.
18. O.D. Sherby, T. Oyama, and J. Wadsworth: U.S. Patent 4,448,613, 1984.
19. G. Spanos, J.D. Ayers, C.L. Vold, and I.E. Locci: Metall. Trans. A, 1993, vol. 24A, pp. 809–18.10.1007/BF02656502 ↗