Modeling recrystallization kinetics in AA1050 following simulated breakdown rolling
Source abstract
Abstract
A physical model based on the single grain approach is refined to predict the recrystallization kinetics of a single-phase alloy following hot deformation. The model involves the original and deformed grain geometry, the characteristics of the dislocation networks formed during deformation, and the average mobility of the moving interfaces. The model properly accounts for the effect of the concurrent recovery and textural components in the deformed microstructure on the recrystallization kinetics. Plane strain compression (PSC) tests on an AA1050 aluminum alloy were used to simulate the hot rolling deformation and to provide the necessary input and validation data. Using internal state variables of known magnitude and a single value for the interfacial mobility, a very good agreement between the model predictions and the experimental data were obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. F.J. Humphreys and M. Haltherly:Recrystallisation and Related Annealing Phenomena, Pergamon, London, 1996, pp. 1–491.
2. E. Nes, H.E. Vatne, O. Daaland, T. Furu, R. Orsund, and K. Marthinsen:Proc. 4th Int. Conf. of Aluminium Alloys, (ICAA4), Atlanta, GA, 1994, T.H. Sanders, Jr. and E.A. Starke, Jr. eds., pp. 18–49.
3. C.M. Sellars: inThermomechanical Processing in Theory, Modeling & Practice [TMP] 2, B. Hutchinsonet al., eds., Swedish Society for Metals Technology, ASM Stockholm, Sweden, 1996, pp. 35–51.
4. H.E. Vatne, T. Furu, R. Orsund, and E. Nes:Acta Mater., 1996, vol. 44, pp. 4463–73.10.1016/1359-6454(96)00078-X ↗
5. E.M. Lauridsen, D.J. Jensen, H.F. Poulsen, and U. Lienert:Scripta Mater., 2000, vol. 43, pp. 561–66.10.1016/S1359-6462(00)00430-9 ↗
6. L. Delannay, O.V. Mishin, D.J. Jensen, and P. van Houtte:Acta Mater., 2001, vol. 49, pp. 2441–51.10.1016/S1359-6454(01)00150-1 ↗
7. S.P. Chen, D.N. Hanlon, S. van der Zwaag, Y.T. Pei, and J.T.M. de Hosson:J. Mater. Sci., 2002, vol. 37, pp. 989–95.10.1023/A:1014356116058 ↗
8. T. Furu, K. Marthinsen, and E. Nes:Mater. Sci. Technol., 1990, vol. 6, pp. 1093–102.10.1179/mst.1990.6.11.1093 ↗
9. S.P. Chen, I. Todd, and S. van der Zwaag:Metall. Mater. Trans. A, 2002, vol. 33A, pp. 529–37.10.1007/s11661-002-0115-4 ↗
10. S.P. Chen and S. van der Zwaag:Metall. Mater. Trans. A, 2004, vol. 35A, pp. 741–49.10.1007/s11661-004-0002-2 ↗
11. F.J. Humphreys:Acta Mater., 1997, vol. 45, pp. 4231–40.10.1016/S1359-6454(97)00070-0 ↗
12. H.K.D.H. Bhadeshia:Worked Examples in the Geometry of Crystals, The Institute of Metal, London, 1987.
13. E. Nes:Acta Metall. Mater., 1995, vol. 43, pp. 2189–207.10.1016/0956-7151(94)00409-9 ↗
14. C.M. Sellars:Ironmaking and Steelmaking, 1995, vol. 22, pp. 459–64.
15. MARC:Users’ Manual, Marc Analysis Research Corporation, Palo Alto, CA, 1996.
16. D.R. Barraclough and C.M. Sellars:Met. Sci., 1979, vol. 13, pp. 257–68.10.1179/msc.1979.13.3-4.257 ↗
17. E.E. Underwood:Quantitative Microscopy, McGraw-Hill Book Co., New York, NY, 1968.
18. W.A. Johnson and R.F. Mehl:Trans. Am. Inst. Min (Metall.) Eng., 1939, vol. 135, pp. 416–43.
19. G.R. Speich and R.M. Fisher: inRecrystallisation, Grain Growth and Textures, H. Margolin, ed., ASM, Cleveland, OH, 1966, pp. 563–98.
20. E. Nes and T. Furu:Scripta Metall. Mater., 1995, vol. 33, pp. 87–92.10.1016/0956-716X(95)00104-4 ↗
21. G.M. Hood:Phil. Mag. A, 1969, vol. 21, pp. 305–24.10.1080/14786437008238419 ↗
22. E.C.W. Perryman:Trans. AIME, J. Met., 1955, vol. 203, pp. 1053–61.
23. C.M. Sellars, A.M. Irisarri, and E.S. Puchi: inMicrostructural Control in Alminium Alloys: Deformation, Recovery and Recrystallisation, E. Henry Chia and H.J. McQueen, eds., TMS, Warrendale, PA, 1985, pp. 179–96.
24. K.D. Vernon-Parry, T. Furu, D.J. Jensen, and F.J. Humphreys:Mater. Sci. Technol., 1996, vol. 12, pp. 889–96.10.1179/mst.1996.12.11.889 ↗
25. H.J. Bunge: inTexture Analysis in Materials Science, Butterworth and Co., London, 1982.
26. C.V. Thompson, H.J. Frost, and F. Spaepen:Acta Metall., 1987, vol. 35, pp. 887–90.10.1016/0001-6160(87)90166-0 ↗
27. B. Verlinden, P. Ratchev, R. van den Broeck, and M.R. van der Winden:Proc. 1st Joint Int. Conf., Aachen, Germany, 2001, G. Gottstein and D.A. Molodov, eds., Springer-Verlag, New York, NY, 2001, pp. 1329–35.
28. Y. Huang and F.J. Humphreys:Proc. 1st Joint Int. Conf., Aachen, Germany, 2001, G. Gottstein and D.A. Molodov, eds., Springer-Verlag, New York, NY, 2001, pp. 409–14.
29. G. Gottstein and L.S. Shvindlerman: inGrain Boundary Migration in Metals Thermodynamics, Kinetics, Applications, B. Ralph, ed., CRC Press, Boca Raton, FL, 1999, pp. 203–47.