Synthesis of Nanostructured and Nanoporous TiO2-AgO Mixed Oxide Derived from a Particulate Sol-Gel Route: Physical and Sensing Characteristics
Source abstract
Abstract
Nanocrystalline TiO2-AgO thin films and powders were prepared by an aqueous particulate sol-gel route at the low temperature of 573 K (300 °C). Titanium tetraisopropoxide and silver nitrate were used as precursors, and hydroxypropyl cellulose was used as a polymeric fugitive agent in order to increase the specific surface area. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) revealed that the phase composition of the mixed oxide depends upon the annealing temperature, being a mixture of TiO2 and AgO in the range 573 K to 773 K (300 °C to 500 °C) and a mixture of TiO2, AgO, and Ag2O at 973 K (700 °C). Furthermore, one of the smallest crystallite sizes was obtained for TiO2-AgO mixed oxide, being 4 nm at 773 K (500 °C). Field emission–scanning electron microscopic (FE-SEM) and atomic force microscopic (AFM) images revealed that the deposited thin films had nanostructured and nanoporous morphology with columnar topography. Thin films produced under optimized conditions showed excellent microstructural properties for gas sensing applications. They exhibited a remarkable response toward low concentrations of CO gas (i.e., 25 ppm) at low operating temperature of 473 K (200 °C), resulting in an increase of the thermal stability of sensing films as well as a decrease in their power consumption. Furthermore, TiO2-AgO sensors follow the power law for the detection of CO gas.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. M.C. Carotta, M. Ferroni, D. Gnani, V. Guidi, M. Merli, G. Martinelli, M.C. Casale, and M. Notaro: Sens. Actuators B: Chem., 1999, vol. 58, pp. 310–17.10.1016/S0925-4005(99)00148-3 ↗
2. D. Mao, G. Lu, and Q. Chen: Appl. Cataly. A: General, 2004, vol. 263, pp. 83–89.10.1016/j.apcata.2003.12.028 ↗
3. R. Fretwell and P. Douglas: J. Photochem. Photobiol. A: Chem., 2001, vol. 143, pp. 229–40.10.1016/S1010-6030(01)00526-3 ↗
4. A. Ruiz, G. Dezanneau, J. Arbiol, A. Cornet, and J.R. Morante: J. Thin Solid Films, 2003, vol. 436, pp. 90–93.10.1016/S0040-6090(03)00515-7 ↗
5. I. Hayakawa, Y. Iwamoto, K. Kikuta, and S. Hirano: Sens. Actuators B: Chem., 2000, vol. 62, pp. 55–60.10.1016/S0925-4005(99)00303-2 ↗
6. O.K. Tan, W. Cao, Y. Hu, and W. Zhu: Ceram. Int., 2004, vol. 30, pp. 1127–33.10.1016/j.ceramint.2003.12.015 ↗
7. G. Dai: Sens. Actuators B: Chem., 1998, vol. 53, pp. 8–12.10.1016/S0925-4005(98)00286-X ↗
8. C. Garzella, E. Comini, E. Tempesti, C. Frigeri, and G. Sberveglier: Sens. Actuators B: Chem., 2000, vol. 68, pp. 189–96.10.1016/S0925-4005(00)00428-7 ↗
9. M.C. Carotta, M. Ferroni, D. Gnani, V. Guidi, M. Merli, G. Martinelli, M.C. Casale, and M. Notaro: Sens. Actuators B: Chem., 1999, vol. 58, pp. 310–17.10.1016/S0925-4005(99)00148-3 ↗
10. A.M. Ruiz, A. Cornet, K. Shimanoe, J.R. Morante, and N. Yamazoe: Sens. Actuators B: Chem., 2005, vol. 108, pp. 34–40.10.1016/j.snb.2004.09.045 ↗
11. S. Zhuiykov, W. Wlodarski, and Y. Li: Sens. Actuators B: Chem., 2001, vol. 77, pp. 484–90.10.1016/S0925-4005(01)00739-0 ↗
12. A.M. Ruiz, A. Cornet, K. Shimanoe, J.R. Morante, and N. Yamazoe: Sens. Actuators B: Chem., 2005, vol. 109, pp. 7–12.10.1016/j.snb.2005.06.040 ↗
13. K.K. Galatsis, Y.X. Li, W. Wlodarski, E. Comini, G. Faglia, and G. Sberveglieri: Sens. Actuators B: Chem., 2001, vol. 77, pp. 472–77.10.1016/S0925-4005(01)00737-7 ↗
14. H. Yang, D. Zhang, and L. Wang: Sens. Actuators B: Chem., 2002, vol. 57, pp. 674–78.
15. Y. Li, W. Wlodarski, K. Galatsis, S.H. Moslih, J. Cole, S. Russo, and N. Rockelmann: Sens. Actuators B: Chem., 2002, vol. 83, pp. 160–63.10.1016/S0925-4005(01)01031-0 ↗
16. A. Trinchi, Y.X. Li, W. Wlodarski, S. Kaciulis, L. Pandolfi, S. Viticoli, E. Comini, and G. Sberveglieri: Sens. Actuators B: Chem., 2003, vol. 95, pp. 145–50.10.1016/S0925-4005(03)00424-6 ↗
17. M. Li and Y. Chen: Sens. Actuators B: Chem., 1996, vol. 32, pp. 83–85.10.1016/0925-4005(96)80113-4 ↗
18. Y. Xu, K. Yao, X. Zhou, and Q. Cao: Sens. Actuators B: Chem., 1993, vol. 14, pp. 492–94.10.1016/0925-4005(93)85061-E ↗
19. O. Bartels, A. Splinter, U. Storm, and J. Binder: Proc. SPIE, Device and Process Technologies for MEMS and Microelectronics, Queensland, Australia, 1999, vol. 3892, pp. 184–91.10.1117/12.364482 ↗
20. J. Chen, J. Li, J. Li, G. Xiao, and X. Yang: J. Alloys Compds., 2001, vol. 509, pp. 740–43.10.1016/j.jallcom.2010.09.043 ↗
21. L. Xu, H. Song, B. Dong, Y. Wang, J. Chen, and X. Bai: Inorg. Chem., 2010, vol. 49, pp 10590–97.10.1021/ic101602a ↗
22. M.K. Seery, R. George, P. Floris, and S.C. Pillai: J. Photochem. Photobio. A: Chem., 2007, vol. 189, pp. 258–63.10.1016/j.jphotochem.2007.02.010 ↗
23. E. Traversa, M. Luisa Di Vona, P. Nunziate, and S. Licoccia: J. Sol-Gel Sci. Technol., 2000, vol. 19, pp. 733–36.10.1023/A:1008787412057 ↗
24. M.R. Mohammadi, M.C. Cordero-Cabrera, M. Ghorbani, and D.J. Fray: J. Sol-Gel Sci. Technol., 2006, vol. 40, pp. 15–23.10.1007/s10971-006-8267-0 ↗
25. M.R. Mohammadi, M.C. Cordero-Cabrera, D.J. Fray, and M. Ghorbani: Sens. Actuators B: Chem., 2006, vol. 120, pp. 86–95.10.1016/j.snb.2006.01.046 ↗
26. B.D. Cullity: Elements of X-Ray Diffraction, Addison-Wesley Publishing Company, Inc, London, 1978, p. 67.
27. M.R. Mohammadi, D.J. Fray, and A. Mohammadi: Mic. Mes. Mater., 2008, vol. 112, pp. 392–402.10.1016/j.micromeso.2007.10.015 ↗
28. DST Customer Training Manual for Zeta Potential, Malvern Instruments, Worcestershire, UK, 2003, p. 7.
29. T. Ivanova, A. Harizanova, and M. Surtchev: Mater. Lett., 2002, vol. 55, pp. 327–33.10.1016/S0167-577X(02)00387-7 ↗
30. G. Socrates: Infrared Characteristic Group Frequencies: Tables and Charts, John Wiley & Sons, Chichester, United Kingdom, 1994, p. 137.
31. J.T. Last: Phys. Rev., 1957, vol. 105, pp. 1740–50.10.1103/PhysRev.105.1740 ↗
32. G.I.N. Waterhouse, G.A. Bowmaker, and J.B. Metson: Phys. Chem. Chem. Phys., 2001, vol. 3, pp. 3838–45.10.1039/b103226g ↗
33. M. Inagaki, Y. Nakazawa, M. Hirano, Y. Kobayashi, and M. Toyoda: J. Inorg. Mater., 2001, vol. 3, pp. 809–11.10.1016/S1466-6049(01)00176-3 ↗
34. R.E. Tanner, Y. Liang, and E.I. Altman: Surf. Sci., 2002, vol. 506, pp. 251–71.10.1016/S0039-6028(02)01388-2 ↗
35. T.G. Nenov and S.P. Yordanov: Ceramic Sensors Technology and Applications, Technomic Publishing Company, Lancaster, 1996, pp. 105–08.
36. P.T. Moseley and B.C. Tofield: Solid State Gas Sensors, IOP Publishing Ltd., Bristol, United Kingdom, 1987, p. 57.
37. G.S. Devi, T. Hyodo, Y. Shimizu, and M. Egashira: Sens. Actuators B: Chem., 2002, vol. 87, pp. 122–29.10.1016/S0925-4005(02)00228-9 ↗
38. A.M. Ruiz, J. Arbiol, A. Cornet, K. Shimanoe, J.R. Morante, and N. Yamazoe: Mater. Res. Soc., 2005, vol. 828, pp. A4.10.1–A4.10.6.
39. A. Ruiz, G. Dezanneaau, J. Arbiol, A. Cornet, and J.R. Morante: J. Thin Solid Films, 2003, vol. 436, pp. 90–94.10.1016/S0040-6090(03)00515-7 ↗
40. N. Bonini, M.C. Carotta, A. Chiorino, V. Guidi, C. Malagu, G. Martinelli, L. Paglialonga, and M. Sacerdoti: Sens. Actuators B: Chem., 2000, vol. 68, pp. 274–80.10.1016/S0925-4005(00)00444-5 ↗
41. A.M. Ruiz, G. Sakai, A. Cornet, K. Shimanoe, J.R. Morante, and N. Yamazoe: Sens. Actuators B: Chem., 2003, vol. 93, pp. 509–18.10.1016/S0925-4005(03)00183-7 ↗
42. K.P. Biju and M.K. Jain: Sens. Actuators B: Chem., 2008, vol. 128, pp. 407–13.10.1016/j.snb.2007.06.029 ↗
43. C. Garzella, E. Bontempi, L.E. Depero, A. Vomiero, G. Della Mea, and G. Sberveglieri: Sens. Actuators B: Chem., 2003, vol. 93, pp. 495–502.10.1016/S0925-4005(03)00192-8 ↗
44. M.R. Mohammadi, D.J. Fray, and M.C. Cordero-Cabrera: Sens. Actuators B: Chem., 2007, vol. 124, pp. 74–83.10.1016/j.snb.2006.11.048 ↗
45. S. Capone, R. Rella, P. Siciliano, and L. Vasanelli: J. Thin Solid Films, 1999, vol. 350, pp. 264–68.10.1016/S0040-6090(99)00045-0 ↗