Generalized Constitutive-Based Theoretical and Empirical Models for Hot Working Behavior of Functionally Graded Steels
Source abstract
Abstract
Functionally graded steels with graded ferritic and austenitic regions including bainite and martensite intermediate layers produced by electroslag remelting have attracted much attention in recent years. In this article, an empirical model based on the Zener–Hollomon (Z-H) constitutive equation with generalized material constants is presented to investigate the effects of temperature and strain rate on the hot working behavior of functionally graded steels. Next, a theoretical model, generalized by strain compensation, is developed for the flow stress estimation of functionally graded steels under hot compression based on the phase mixture rule and boundary layer characteristics. The model is used for different strains and grading configurations. Specifically, the results for αβγMγ steels from empirical and theoretical models showed excellent agreement with those of experiments of other references within acceptable error.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. S. Suresh and A. Mortensen: Fundamentals of Functionally Graded Materials, 1st ed., Cambridge University Press, Cambridge, U.K., 1998.
2. O. Kolednik: Int. J. Solid. Struct., 2000, vol. 37, pp. 781–808.10.1016/S0020-7683(99)00060-8 ↗
3. B. Bezensek and J.W. Hancock: Eng. Fract. Mech., 2007, vol. 74, pp. 2395–2419.10.1016/j.engfracmech.2006.11.011 ↗
4. J. Aghazadeh Mohandesi and M.H. Shahossini: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3471–76.10.1007/s11661-005-0020-8 ↗
5. J. Aghazadeh Mohandesi, M.H. Shahossinie, and R. Parastar: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2125–32.10.1007/BF02586133 ↗
6. A. Nazari, J. Aghazadeh Mohandesi, and S. Tavareh: Comput. Mater. Sci., 2011, vol. 50, pp. 1781–84.10.1016/j.commatsci.2011.01.014 ↗
7. A. Nazari, J. Aghazadeh Mohandesi, and S. Tavareh: Comput. Mater. Sci., 2011, vol. 50, pp. 1791–94.10.1016/j.commatsci.2011.01.016 ↗
8. A. Nazari and S.M. Mojtahed Najafi: Comput. Mater. Sci., 2011, vol. 50, pp. 3178–83.10.1016/j.commatsci.2011.05.047 ↗
9. A. Nazari: Comput. Mater. Sci., 2011, vol. 50, pp. 3238–44.10.1016/j.commatsci.2011.06.008 ↗
10. S.A. Sadough Vanini, M. Abolghasemzadeh, N. Kordani, and M. Sarmadian: Mater. Sci. Eng. A, 2012, vol. 546, pp. 198–206.10.1016/j.msea.2012.03.051 ↗
11. M. Abolghasemzadeh, H. Samareh Salavati Pour, F. Berto, and Y. Alizadeh: Mater. Sci. Eng. A, 2012, vol. 534, pp. 329–38.10.1016/j.msea.2011.11.077 ↗
12. K. Dehghani and A.A. Khamei: Mater. Sci. Eng. A, 2012, vol. 527, pp. 684–90.10.1016/j.msea.2009.08.059 ↗
13. Y.C. Lin, Y.C. Xia, X.M. Chen, and M.S. Chen: Comput. Mater. Sci., 2012, vol. 50, pp. 227–33.10.1016/j.commatsci.2010.08.003 ↗
14. A. Momeni and K. Dehghani: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1448–54.10.1016/j.msea.2010.11.020 ↗
15. J.H. Sung, J.H. Kim, and R.H. Wagoner: Int. J. Plast., 2012, vol. 26, pp. 1746–71.10.1016/j.ijplas.2010.02.005 ↗
16. S. Spigarelli, M. El Mehtedi, P. Ricci, and C. Mapelli: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4218–28.10.1016/j.msea.2010.03.029 ↗
17. H. Mirzadeh and A. Najafizadeh: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1160–64.10.1016/j.msea.2009.09.060 ↗
18. M.C. Cai, L.S. Niu, X.F. Ma, and H.J. Shi: Mech. Mater., 2010, vol. 42, pp. 774–81.10.1016/j.mechmat.2010.06.006 ↗
19. G.H. Majzoobi, F. Freshteh-Saniee, S. FarajZadeh Khosroshahi, and H. BeikMohammadloo: Comput. Mater. Sci., 2010, vol. 49, pp. 192–200.10.1016/j.commatsci.2010.03.054 ↗
20. C. Zener and J.H. Hollomon: J. Appl. Phys., 1944, vol. 15, pp. 22–32.10.1063/1.1707363 ↗
21. H.J. McQueen and N.D. Ryan: Mater. Sci. Eng. A, 2002, vol. 322, pp. 43–63.10.1016/S0921-5093(01)01117-0 ↗
22. F. Garofalo: Fundamentals of Creep and Creep-Rupture in Metals, Macmillan, New York, NY, 1965.
23. C.M. Sellars and W.J.M.c.G. Tegart: Acta Metall., 1966, vol. 14, pp. 1136–38.10.1016/0001-6160(66)90207-0 ↗
24. J. Jonas, A.J Sellars, and W.J.M.c.G. Tegart: Int. Met. Rev., 1969, vol. 14, pp. 1–24.10.1179/095066069790138056 ↗
25. H. Shi, A.J. McLaren, C.M. Sellars, R. Shahani, and R. Bolingbroke: Mater. Sci. Technol., 1997, vol. 13, pp. 210–16.10.1179/026708397790302421 ↗
26. B. Naderi and J. Aghazadeh Mohandesi: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2250–58.10.1007/s11661-011-0625-z ↗
27. A. Nazari and J. Aghazadeh Mohandesi: J. Mater. Sci. Technol., 2009, vol. 25 (6), pp. 847–52.