Environmental Crack Driving Force
Source abstract
Abstract
The effect of environment on the crack driving force is considered, first by assuming quasistatic extension of a stationary crack and second, by use of stress corrosion cracking (SCC) crack growth rate models developed previously by this author and developed further here. A quasistatic thermodynamic energy balance approach, of the Griffith-Irwin type, is used to develop stationary crack threshold expressions, $$ \tilde{J}\rm c $$ , which represent the conjoint mechanical and electrochemical conditions, below which stationary cracks are stable. Expressions for the electrochemical crack driving force (CDF) were derived using an analysis that is analogous to that used by Irwin to derive his “strain energy release rate,” G, which Rice showed as being equivalent to his mechanical CDF, J. The derivations show that electrochemical CDFs both for active path dissolution (APD) and hydrogen embrittlement (HE) mechanisms of SCC are simply proportional to Tafel’s electrochemical anodic and cathodic overpotentials, η a and η c, respectively. Phenomenological SCC models based on the kinetics of APD and HE crack growth are used to derive expressions for the kinetic threshold, J scc, below which crack growth cannot be sustained. These models show how independent mechanical and environmental CDFs may act together to drive SCC crack advance. Development of a user-friendly computational tool for calculating Tafel’s overpotentials is advocated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. A.K. Vasudevan, N.R. Moody, N.J.H. Holroyd and R.E. Ricker: Metall. Mater. Trans., 2011, vol. 42A, p. 249.
2. J M West: Met. Sci. J., 1973, vol. 7, pp.169-172.10.1179/030634573790445703 ↗
3. J.M. West: Met. Sci., 1980, vol. 14, pp. 534-40.10.1179/030634580790426067 ↗
4. J.M. West: Basic Corrosion and Oxidation, Ellis Horwood Publishers, Wiley, New York, 1980, p. 153.
5. R. Rice: J. Appl. Mech., 1968, vol. 35, pp. 379-86.10.1115/1.3601206 ↗
6. J.A. Begley and J.D. Landes: Fracture Toughness, Proceedings of the 1971 National Symposium on Fracture Mechanics, Part II, ASTM STP 514, American Society for Testing and Materials, Philadelphia, 1972, pp. 1–20.10.1520/STP38816S ↗
7. A.A. Griffith: Philos. Trans. A, 1920, vol. A221, pp. 163-98.
8. G.R. Irwin: Sagamore Research Conference Proceedings, 1956, vol. 2, pp. 289–305.
9. J.R. Rice: in Proceedings of 1st International Conference on Fracture, Sendi, Tokyo, T. Yokobori, T. Kawasaki, and J.L. Swedlow, eds., Japanese Society for Strength and Fracture of Materials, Tokyo, 1966, pp. 309–40.
10. G. Elssner, D. Korn and M. Ruhle: Scripta Metall. Mater., 1994, vol. 31, pp. 1037-42.10.1016/0956-716X(94)90523-1 ↗
11. M.L. Jokl, V. Vitek and C.J. McMahon: Acta Metall., 1980, vol. 28, pp. 1479–88.10.1016/0001-6160(80)90048-6 ↗
12. P. Novak, R. Yuan, B.P. Somerday, P. Sofronis, R.O. Ritchie: J. Mech. Phys. Solids, 2010, vol. 58, pp. 206–26.10.1016/j.jmps.2009.10.005 ↗
13. J. Tafel: Z. Phys. Chem., 1905, vol. 50, pp. 641-712.10.1515/zpch-1905-5043 ↗
14. G.T. Burstein: Corr. Sci., 2005, vol. 47, pp. 2858–70.10.1016/j.corsci.2005.07.002 ↗
15. L.B. Freund: J. Elast., 1972, vol.2, pp. 341-49.10.1007/BF00045718 ↗
16. A. Turnbull: Corrosion, 2001, vol. 57, pp 175-89.10.5006/1.3290342 ↗
17. D.A. Jones: Principals and Prevention of Corrosion, 2nd ed., Prentice Hall, Upper Saddle River, NJ, 1996.
18. T.L. Anderson: Fracture Mechanics, 3rd ed., Taylor and Francis, Boca Raton, FL, 2005.
19. M.M. Hall, Jr.: Corros. Sci., 2009, vol. 51, pp. 225-33.10.1016/j.corsci.2008.08.052 ↗
20. T.P. Hoar and J.M. West: Proc. R. Soc., 1962, vol. 268, pp. 304-15.10.1098/rspa.1962.0142 ↗
21. M.M. Hall, Jr.: in Environment-Induced Cracking of Materials, S. Shipilov, R. Jones, J. Olive, and R. Rebak, eds., Elsevier, Amsterdam, 2008, pp. 59–68.
22. W. Ramberg and W.R. Osgood: Technical Note No. 902, National Advisory Committee for Aeronautics, Washington DC, 1943.
23. H. Tanaka, T. Yamada, E. Sato, I. Jimbo: Scripta Mater., 2006, vol. 54, pp. 121-24.10.1016/j.scriptamat.2005.08.045 ↗
24. M.A. Choudhry and M. Ashraf: J. Alloy. Compd., 2007, vol. 437, pp. 113-16.10.1016/j.jallcom.2006.07.079 ↗
25. M.M. Hall, Jr.: Corros. Sci., 2008, vol. 50, 2902-05.10.1016/j.corsci.2008.07.011 ↗
26. M.M. Hall, Jr., D.M. Symons, and J.J. Kearns: in Parkins Symposium on Fundamental Aspects of Stress Corrosion Cracking, S.M. Bruemmer, E.I. Meletis, R.H. Jones., W.W. Gerberich, F.P. Ford, and R.W. Staehle, eds., The Minerals, Metals & Materials Society, Warrendale, PA, 1992, pp. 231–44.
27. C.F. Shih: J. Mech Phys. Solids, 1981, vol. 29, pp. 305-26.10.1016/0022-5096(81)90003-X ↗
28. M.M. Hall, Jr. and D.M. Symons: in Chemistry and Electrochemistry of Stress Corrosion Cracking, R.H. Jones, ed., The Minerals, Metals and Materials Society, Warrendale, PA, 2001, pp. 447–66.
29. M.M. Hall, Jr.: Metall. Mater. Trans. A., 2011, vol. 42A, pp. 304-18.10.1007/s11661-010-0226-2 ↗
30. R.A. Oriani: Annu. Rev. Mater. Sci., 1978, vol. 8, pp. 327-57.10.1146/annurev.ms.08.080178.001551 ↗
31. T. McMullen, M.J. Stott and E. Zaremba: Philos. Mag. A, 1989, vol. 59, pp. 161-70.10.1080/01418618908220336 ↗
32. J.R. Rice, W.J. Drugan, and T.-L. Sham: in Fracture Mechanics, Twelth Conference, ASTM STP 700, American Society for Testing and Materials, Philadelphia, 1980, pp. 189–221.10.1520/STP36972S ↗
33. W. Dietzel and K.H. Schwalbe: in Hydrogen Effects on Material Behavior, N.R. Moody and A.W. Thompson, eds., The Minerals, Metal & Material Society, Warrendale, 1990, pp. 975–83.
34. D.M. Symons: J. Nucl. Mater., 1999, vol. 265, pp. 225-31.10.1016/S0022-3115(98)00888-5 ↗
35. D.M. Symons: Eng. Fract. Mech., 2001, vol. 68, pp. 751-71.10.1016/S0013-7944(00)00123-5 ↗
36. J.R. Rice: in Effect of Hydrogen on Behavior of Materials, A.M. Thompson and I.M. Berstein, eds., TMS-AIME, New York, 1976, pp. 455–66.
37. J.P. Hirth and J.R. Rice: Metall. Trans A, 1975, vol. 11A, pp. 1501-11.
38. M. Dadfarnia, P. Sofronis, B.P. Somerday, J.B. Liu, D.D. Johnson, and I.M. Robertson: in Effect of Hydrogen on Behavior of Materials, B. Somerday. P. Sofronis, and R. Jones, eds., ASM International, Metals Park, 2009, pp. 613–20.
39. Y. Mishin, P. Sofronis and J.L. Bassani: Acta Mater., 2002, vol. 50, pp. 3609-22.10.1016/S1359-6454(02)00165-9 ↗
40. B.F. Brown, C.T. Fujii, E.P. Dahlberg: J. Electrochem. Soc., 1969, vol. 116, pp. 218–19.10.1149/1.2411799 ↗
41. A. Turnbull: Corrosion, 2001, vol. 57, pp. 175-89.10.5006/1.3290342 ↗
42. J. O’M. Bockris and P.K. Subramanyan: Electrochim. Acta, 1971, vol. 16, pp. 2169–79.10.1016/0013-4686(71)85027-2 ↗
43. D. Hong-Zi and X. Xiu-San, J. Mater. Sci., 1992, vol. 27, pp. 3203-05.10.1007/BF01116012 ↗