Evolution of Intergranular Stresses in a Martensitic and an Austenitic NiTi Wire During Loading–Unloading Tensile Deformation
Source abstract
Abstract
In situ synchrotron X-ray diffraction testing was carried out on a martensitic and an austenitic NiTi wire to study the evolution of internal stresses and the stress-induced martensite (SIM) phase transformation during room temperature tensile deformation. From the point of lattice strain evolution, it is concluded that (1) for the martensitic NiTi wire, detwinning of the [011]B19′ type II twins and the {010}B19′ compound twins is responsible for internal strains formed at the early stage of deformation. (2) The measured diffraction moduli of individual martensite families show large elastic anisotropy and strong influences of texture. (3) For the austenitic NiTi wire, internal residual stresses were produced due to transformation-induced plasticity, which is more likely to occur in austenite families that have higher elastic moduli than their associated martensite families. (4) Plastic deformation was observed in the SIM at higher stresses, which largely decreased the lower plateau stresses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. T.W. Duerig, A. Pelton, and D. Stockel: Mater. Sci. Eng. A, 1999, vol. 273–275, pp. 149–60.10.1016/S0921-5093(99)00294-4 ↗
2. B. Thierry, Y. Merhi, L. Bilodeau, C. Trepanier, and M. Tabrizian: Biomaterials, 2002, vol. 23, pp. 2997–3005.10.1016/S0142-9612(02)00030-3 ↗
3. J.E. Schaffer, E.A. Nauman, and L.A. Stanciu: Metall. Mater. Trans. B, 2012, vol. 43B, pp. 984–94.10.1007/s11663-012-9661-3 ↗
4. Y. Liu and Z.L. Xie: Acta Mater., 2003, vol. 51, pp. 5529–43.10.1016/S1359-6454(03)00417-8 ↗
5. T. Ezaz, J. Wang, H. Sehitoglu, and H.J. Maier: Acta Mater., 2013, vol. 61, pp. 67–78.10.1016/j.actamat.2012.09.023 ↗
6. D.M. Norfleet, P.M. Sarosi, S. Manchiraju, M.F.-X. Wagner, M.D. Uchic, P.M. Anderson, and M.J. Mills: Acta Mater, 2009, vol. 57, pp. 3549–61.10.1016/j.actamat.2009.04.009 ↗
7. S.W. Robertson, A.R. Pelton, and R.O. Ritchie: Int. Mater. Rev., 2012, vol. 57, pp. 1–36.10.1179/1743280411Y.0000000009 ↗
8. A.L. McKelvey and R.O. Ritchie: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 731–43.10.1007/s11661-001-1008-7 ↗
9. J.E. Schaffer: JMEPEG, 2009, vol. 18, pp. 582–87.10.1007/s11665-009-9369-y ↗
10. T. Waitz, T. Antretter, F.D. Fischer, N.K. Simha, and H.P. Karnthaler: J. Mech. Phys. Solids, 2007, vol. 55, pp. 419–44.10.1016/j.jmps.2006.06.006 ↗
11. G. Fan, W. Chen, S. Yang, J. Zhu, X. Ren, and K. Otsuka, Acta Mater., 2004, vol. 52, pp. 4351–62.10.1016/j.actamat.2004.06.002 ↗
12. M. Rahim, J. Frenzel, M. Frotscher, J. Pfetzing-Micklich, R. Steegmüller, M. Wohlschlögel, H. Mughrabi, and G. Eggeler: Acta Mater., 2013, vol. 61, pp. 3667–86.10.1016/j.actamat.2013.02.054 ↗
13. K. Gall and H.J. Maier: Acta Mater., 2002, vol. 50, pp. 4643–57.10.1016/S1359-6454(02)00315-4 ↗
14. R.F. Hamilton, H. Sehitoglu, Y. Chumlyakov, and H.J. Maier: Acta Mater., 2004, vol. 52, 3383–3402.10.1016/j.actamat.2004.03.038 ↗
15. R.M. Tabanli, N.K. Simha, and B.T. Berg: Mater. Sci. Eng., 1999, vol. 273–275, pp. 644–48.10.1016/S0921-5093(99)00340-8 ↗
16. R.M. Tabanli, N.K. Simha, and B.T. Berg: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1866–69.10.1007/s11661-001-0164-0 ↗
17. S.C. Mao, J.F. Luo, Z. Zhang, M.H. Wu, Y. Liu, and X.D. Han: Acta Mater., 2010, vol. 58, pp. 3357–66.10.1016/j.actamat.2010.02.009 ↗
18. N.G. Jones and D. Dye: Intermetallics, 2011, vol. 19, pp. 1348–58.10.1016/j.intermet.2011.03.032 ↗
19. B. Ye, B.S. Majumdar, and I. Dutta: Acta Mater., 2009, vol. 57, pp. 2403–17.10.1016/j.actamat.2009.01.032 ↗
20. S. Qiu, B. Clausen, S.A. Padula II, R.D. Noebe, and R. Vaidyanathan: Acta Mater., 2011, vol. 59, pp. 5055–66.10.1016/j.actamat.2011.04.018 ↗
21. A.P. Stebner, D.W. Brown, and L.C. Brinson: Appl. Phys. Lett., 2013, vol. 102, p. 211908.10.1063/1.4808040 ↗
22. A.P. Stebner, D.W. Brown, and L.C. Brinson, Acta Mater., 2013, vol. 61, pp. 1944–56.10.1016/j.actamat.2012.12.015 ↗
23. S. Rajagopalan and A.L. Little, M.A.M. Bourke, and R. Vaidyanathan: Appl. Phys. Lett., 2005, vol. 86, p. 081901.10.1063/1.1863437 ↗
24. P. Šittner, L. Heller, J. Pilch, C. Curfs, T. Alonso, and D. Favier: Proceedings of the International Conference on Shape Memory and Superelastic Technologies, May 2013.
25. O. Benafan, S.A. Padula II, R.D. Noebe, T.A. Sisneros, and R. Vaidyanathan: J. Appl. Phys., 2012, vol. 112, p. 093510.10.1063/1.4764313 ↗
26. O. Benafan, R.D. Noebe, S.A. Padula II, A. Garg, B. Clausen, S. Vogel, and R. Vaidyanathan: Int. J. Plast., 2013, vol. 51, pp. 103–21.10.1016/j.ijplas.2013.06.003 ↗
27. P. Šittner, P. Lukáš, V. Novák, M.R. Daymond, and G.M. Swallowe: Mater. Sci. Eng., 2004, vol. 378, pp. 97–104.10.1016/j.msea.2003.09.112 ↗
28. S.L. Raghunathan, M.A. Azeem, D. Collins, and D. Dye: Scripta Mater., 2008, vol. 59, pp. 1059–62.10.1016/j.scriptamat.2008.07.014 ↗
29. M.L. Young, M.F.-X. Wagner, J. Frenzel, W.W. Schmahl, and G. Eggeler: Acta Mater., 2010, vol. 58, pp. 2344–54.10.1016/j.actamat.2009.12.021 ↗
30. M.L. Young, S. Gollerthan, A. Baruj, J. Frenzel, W.W. Schmahl, and G. Eggeler: Acta Mater., 2013, vol. 61, pp. 5800–06.10.1016/j.actamat.2013.06.024 ↗
31. M. Hasan, W.W. Schmahl, K. Hackl, R. Heinen, J. Frenzel, S. Gollerthan, G. Eggeler, M. Wagner, J. Khalil-Allafi, and A. Baruj: Mater. Sci. Eng., 2008, vol. 481–482, pp. 414–19.10.1016/j.msea.2007.02.156 ↗
32. M.R. Daymond, M.L. Young, J.D. Almer, and D.C. Dunand: Acta Mater., 2007, vol. 55, pp. 3929–42.10.1016/j.actamat.2007.03.013 ↗
33. S.W. Robertson, A. Mehta, A.R. Pelton, and R.O. Ritchie: Acta Mater., 2007, vol. 55, pp. 6198–6207.10.1016/j.actamat.2007.07.028 ↗
34. R. Vaidyanathan, M.A.M. Bourke, and D.C. Dunand: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 777–86.10.1007/s11661-001-1012-y ↗
35. R. Vaidyanathan, M.A.M. Bourke, and D.C. Dunand: Acta Mater., 1999, vol. 4, pp. 3353–66.10.1016/S1359-6454(99)00214-1 ↗
36. S. Cai, J.E. Schaffer, Y. Ren, and C. Yu: Appl. Phys. Lett., 2013, vol. 103, p. 241909.10.1063/1.4846495 ↗
37. S. Cai, M.R. Daymond, Y. Ren, and J.E. Schaffer: Acta Mater., 2013, vol. 61, pp. 6830–42.10.1016/j.actamat.2013.07.062 ↗
38. S. Cai, M.R. Daymond, and Y. Ren: Mater. Sci. Eng. A, 2013, vol. 580, pp. 209–16.10.1016/j.msea.2013.05.050 ↗
39. A.P. Hammersley: FIT2D V9.129 Reference Manual V3.1, ESRF Internal Report, 1998.
40. A.C. Larson and R.B. Von Dreele: GSAS—General Structure Analysis System, Los Alamos National Laboratory, Los Alamos, NM, 1994.
41. L. Lutterotti, S. Matthies, H.-R. Wenk, A.S. Schulz, and J.W. Richardson, Jr.: J. Appl. Phys., 1997, vol. 81, p. 594.10.1063/1.364220 ↗
42. H.M. Rietveld: J. Appl. Crystallogr., 1969, vol. 2, pp. 65–71.10.1107/S0021889869006558 ↗
43. H. Sehitoglu, I. Karaman, R. Anderson, X. Zhang, K. Gall, H.J. Maier, and Y. Chumlyakov: Acta Mater., 2000, vol. 48, pp. 3311–26.10.1016/S1359-6454(00)00153-1 ↗
44. M. Nishida, S. Ii, K. Kitamura, T. Furukawa, A. Chiba, T. Hara, and K. Hiraga: Scripta Mater., 1998, vol. 39, pp. 1749–54.10.1016/S1359-6462(98)00366-2 ↗
45. A.P. Stebner, S.C. Vogel, R.D. Noebe, T. Sisneros, B. Clausen, D.W. Brown, A. Garg, and L.C. Brinson: J. Mech. Phys. Solids, 2013, vol. 61, pp. 2303–30.10.1016/j.jmps.2013.05.008 ↗
46. J.X. Zhang, M. Sato, and A. Ishida: Acta Mater., 2006, vol. 54, pp. 1185–98.10.1016/j.actamat.2005.10.046 ↗
47. M.F.-X. Wagner and W. Windl: Acta Mater., 2008, vol. 56, pp. 6232–45.10.1016/j.actamat.2008.08.043 ↗
48. Y. Liu and D. Favier: Acta Mater., 2000, vol. 48, pp. 3489–99.10.1016/S1359-6454(00)00129-4 ↗
49. H.C. Lin, S.K. Wu, T.S. Chou, and H.P. Kao: Acta Metall. Mater., 1991, vol. 39, pp. 2069–80.10.1016/0956-7151(91)90177-3 ↗
50. O. Mercier, K.N. Melton, G. Gremaud, and J. Hägi: J. Appl. Phys., 1980, vol. 51, 1833–34.10.1063/1.327750 ↗
51. K. Otsuka and X. Ren: Prog. Mater. Sci., 2005, vol. 50, pp. 511–678.10.1016/j.pmatsci.2004.10.001 ↗