The microstructure and recrystallization of flow-formed oxide-dispersion-strengthened ferritic alloy: Part II. Recrystallization behavior
Source abstract
Abstract
The recrystallization behavior of four PM2000 cold flow-formed tubes deformed to levels ranging from 72 to 92 pct has been investigated. It has been found that coarse, high grain aspect ratio (GAR) hoop-oriented grain structures can be produced in Fe-based oxide dispersion strengthened (ODS) alloy tubing by appropriate combinations of flow-forming and subsequent high-temperature annealing; a flow-forming deformation of 89.6 pct produced the coarsest hoop-oriented grain structures in the present study. In the absence of obvious particle alignment, it has been suggested that the formation of hoop-oriented grain structures may be explained by the anisotropic growth of recrystallizing grains into the aligned, anisotropic deformation cell structure observed in the flow-formed tubes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. D. Sporer and K. Lempenaurer: Proc. 13th Int. Plansee Sem., H. Bildstein and R. Eck, eds., Reutte, Austria, Freund Publish House, London, 1993, pp. 796–810.
2. F. Olsson, S.A. Swensson, and R. Duncan: Proc. 15th Plansee Sem., vol. 1, Power Engineering, Reutte, Austria, May 28–June 1, Elsevier Sci. Ltd., Oxford, 2001, pp. 139–49.
3. Y.L. Chen and A.R. Jones: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3777–85.10.1007/s11661-002-0250-y ↗
4. A. Czyrska-Filemonowicz and B. Dubiel: J. Mater. Proc. Tech., 1997, vol. 64, pp. 53–64.10.1016/S0924-0136(96)02553-8 ↗
5. H.K.D.H. Bhadeshia: Mater. Sci. Eng., 1997, vol. A223, pp. 64–77.10.1016/S0921-5093(96)10507-4 ↗
6. D.M. Jaeger: Ph.D. Thesis, The University of Liverpool, Liverpool, 1994.
7. C. Capdevila, Y.L. Chen, N.C.K. Lassen, A.R. Jones, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17, pp. 693–99.10.1179/026708301101510410 ↗
8. Y.L. Chen and A.R. Jones: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2077–85.10.1007/s11661-001-0019-8 ↗
9. Y.L. Chen, A.R. Jones, and U. Miller: Proc. 15th Int. Plansee Seminar, vol. 4, High Performance P/M Metals, Reutte, Austria, May 28–June 1, 2001, pp. 12–25.
10. N. Tsuji, K. Tsuzaki, and T. Maki: Iron Steel Inst. Jpn. Int., 1992, vol. 32 (12), pp. 1319–28.10.2355/isijinternational.32.1319 ↗
11. J. Nutting, S. Ubhi, and T.A. Hughes: Frontiers of High Temperature Materials, Conf. Proc., May 18–21, 1981, J.S. Benjamin, ed., IncoMAP, New York, NY, 1981, pp. 33–41.
12. N.C. Krieger Lassen: Project Report, Risø National Laboratory, Roskilde, Denmak, 2000.
13. R.C. Klug, G. Krauss, and D.K. Matlock: Metall. Trans. A, 1996, vol. 27A, pp. 1954–60.
14. H. Hu: Recovery and Recrystallization of Metals, L. Himme, ed., Gordon and Breach, New York, NY, 1963, pp. 311–62.
15. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon, New York, NY, 1995, pp. 164 and 231.
16. Y.L. Chen and A.R. Jones: Proc. of 21st Risø Int. Symp. on Materials Science, Risø National Lab., Roskilde, Denmark, 2000, pp. 291–96.
17. J.D. Verhoveven: Fundamentals of Physical Metallurgy, Chester Wiley, New York, NY, 1975, pp. 169–201.
18. D. Sporer and G. Korb: Proc. 2nd Int. Conf. on Structural and Application of Mechanical Alloying, Vancouver, Sept. 20–22, 1993, pp. 109–14.
19. N.C. Krieger Lassen: Proc. 21st Risø Int. Symp. on Materials Science, Risø National Lab., Roskilde, Denmark, 2000, pp. 393–400
20. R.W. Cahn: in Physical Metallurgy, 4th revised and enhanced ed., R.W. Cahn and P. Haasen, eds., Elsevier Science BV, Amsterdam, The Netherlands, 1996, pp. 2399–2500.10.1016/B978-044489875-3/50033-8 ↗
21. A.A. Ridha and W.B. Hutchinson: Acta Metall., 1982, vol. 30, pp. 1929–39.10.1016/0001-6160(82)90033-5 ↗
22. R.J. Duggan, M. Hatherly, W.B. Hutchinson, and P.T. Wakefield: Met. Sci., 1978, pp. 343–51.10.1179/030634578790433909 ↗
23. C.G. Dun and P.K. Koh: Trans. AIME, 1956, vol. 206, pp. 1017–28.