journal article·2014-11

Role of Alloying Elements in the Mechanical Behaviors of An Mg-Zn-Zr-Er Alloy

Jing Zhang, Min Liu, Yuchen Dou, Guobao Liu

Publisher page

Abstract

The mechanical behavior of the as-extruded and heat-treated Mg-1.5Zn-0.6Zr and Mg-1.5Zn-0.6Zr-2Er alloys was investigated and correlated with microstructure evolution. Deformation mechanisms are detailed. No evidence of twinning was observed under compression in the Er-bearing alloy throughout the grain size range of ~5 to 27 μm at a strain rate of 0.001 or 1/s. The compressive yield strength followed a Hall–Petch relation with a slope of ~10.3 MPa/mm1/2. Er played a major role in the pyramidal 〈c+a〉 slip that was identified as a dominant plastic deformation mechanism. The CRSS for 〈c+a〉 slip system was greatly reduced and was 98 MPa in the as-extruded alloy. While it did not change the mechanical response of the Mg-1.5Zn-0.6Zr-2Er alloy, annealing was found to promote dissolution of Zn in the Mg matrix, leading to an increase in CRSS for extension twinning in the heat-treated Mg-1.5Zn-0.6Zr alloy. As a result, twinning was only observed under a higher strain rate of 1/s in compression. The CRSS for extension twinning for the heat-treated alloy with a grain size of ~28 μm was estimated to be 40 MPa, a bit lower than that for the Er-bearing alloy of the same grain size, which was 42 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. S.R. Agnew and J.F. Nie: Scripta Mater., 2010, vol. 63, pp. 671–73.10.1016/j.scriptamat.2010.06.029 ↗
2. D.W. Brown, S.R. Agnew, M.A.M. Bourke, T.M. Holden, M.Vogel, and C. Tome: Mater. Sci. Eng. A, 2005, vol. 399, pp. 1-12.10.1016/j.msea.2005.02.016 ↗
3. B. Clausen, C.N. Tome, D.W. Brown, and S.R. Agnew: Acta Mater, 2008, vol. 56, pp. 2456-68.10.1016/j.actamat.2008.01.057 ↗
4. J. Hirsch and T. Al-Samman: Acta Mater., 2013, vol. 61, pp. 818–43.10.1016/j.actamat.2012.10.044 ↗
5. Y.N. Wang and J.C. Huang: Acta Mater., 2007, vol. 55, pp. 897-905.10.1016/j.actamat.2006.09.010 ↗
6. D.L. Yin, J.T. Wang, J.Q. Liu and X. Zhao: J. Alloys Compd., 2009, vol. 478, pp. 789–95.10.1016/j.jallcom.2008.12.033 ↗
7. L. Zhang, C.G. Liu, H.Y. Wang, X.L. Nan, W.Xiao, and Q.C. Jiang: Mater. Sci. Eng. A, 2013, vol. 578, pp. 14-7.10.1016/j.msea.2013.04.026 ↗
8. A.Sadeghi and M. Pekguleryuz: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1678-85.10.1016/j.msea.2010.10.096 ↗
9. Y. Chino, K. Kimura, M. Hakamada and M. Mabuchi: Mater. Sci. Eng. A, 2008, vol. 485, pp. 311–17.10.1016/j.msea.2007.07.076 ↗
10. B.H. Lee, S.H. Park, S. G. Hong, K.T. Park and C.S. Lee: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1162–72.10.1016/j.msea.2010.10.065 ↗
11. Y.B.Chun, J. Geng, N.Stanford, C.H.J. Davies, J.F. Nie and M.R. Barnett: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3653-58.10.1016/j.msea.2010.12.100 ↗
12. Z. Zachariah, S.S.V. Tatiparti, S.K. Mishra, N. Ramakrishnan and U. Ramamurty: Mater. Sci. Eng. A, 2013, vol. 572, pp. 8–18.10.1016/j.msea.2013.02.023 ↗
13. P.L. Mao, Z. Liu and C.Y. Wang: Mater. Sci. Eng. A, 2012, vol. 539, pp. 13–21.10.1016/j.msea.2011.12.068 ↗
14. J. Bohlen, S. Yi, D. Letzig and K.U. Kainer: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7092-98.10.1016/j.msea.2010.07.081 ↗
15. Y. Chino, M. Kado and M. Mabuchi: Acta Mater., 2008, vol. 56, pp. 387–394.10.1016/j.actamat.2007.09.036 ↗
16. C.H Cáceres, D.M Rovera and D.M. Rovera: Journal of Light Metals, 2001, vol. 1, pp. 151-56.10.1016/S1471-5317(01)00008-6 ↗
17. A. Akhtar and E. Teghtsoonian: Acta Metall., 1969, vol. 17, pp. 1351-56.10.1016/0001-6160(69)90152-7 ↗
18. A. Akhtar and E. Teghtsoonian: Philos. Mag., 1972, vol. 25, pp. 897-916.10.1080/14786437208229311 ↗
19. B. Raeisini and Sean R. Agnew: Scripta Mater., 2010, vol. 63, pp. 731–36.10.1016/j.scriptamat.2010.03.054 ↗
20. A.H. Blake and C.H. Cáceres: Mater. Sci. Eng. A, 2008, vol. 483–484, pp. 161–63.10.1016/j.msea.2006.10.205 ↗
21. S.R. gnew, J.A. Horton and M.H. Yoo: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 851-58.
22. J. Zhang, X.F. Zhang, W.G. Li, F.S. Pan and Z.X. Guo: Scripta Mater., 2010, vol. 63, pp. 367-70.10.1016/j.scriptamat.2010.04.015 ↗
23. J. Zhang, W.G. Li, B.X. Zhang and Y.C. Dou: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4740-46.10.1016/j.msea.2011.03.010 ↗
24. M.R. Li, D.W. Deng and K.H. Kuo: J. Alloys Comp., 2006, vol. 414, pp. 66-72.10.1016/j.jallcom.2005.07.008 ↗
25. X.Y. Lou, M. Li, R.K. Boger and S.R. Agnew: Int. J. Plast., 2007, vol. 23, pp. 44–86.10.1016/j.ijplas.2006.03.005 ↗
26. H.L. Kim, W.K. Bang and Y.W. Chang: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5356–65.10.1016/j.msea.2011.03.068 ↗
27. Q. Ma, H.E.I. Kadiri, A.L. Oppedal, J.C. Baird, B. Li, M.F. Horstemeyer and S.C. Vogel: Int. J. Plas., 2012, vol. 29, pp. 60–76.10.1016/j.ijplas.2011.08.001 ↗
28. M.T. Tucker, M.F. Horstemeyer, P.M. Gullett, H.E. Kadiri and W.R. Whittington: Scripta Mater., 2009, vol. 60, pp. 182–85.10.1016/j.scriptamat.2008.10.011 ↗
29. M.R. Barnett, Z. Keshavarz, A.G. Beer and D. Atwell: Acta Mater., 2004, vol. 52, pp. 5093-103.10.1016/j.actamat.2004.07.015 ↗
30. M.H. Yoo: Metall. Trans. A, 1981, vol. 12A, pp. 409–18.10.1007/BF02648537 ↗
31. S. Sandlöbes, M. Friák, J. Neugebauer and D. Raabe: Mater. Sci. Eng. A, 2013, vol. 576, pp. 61–8.10.1016/j.msea.2013.03.006 ↗
32. J.A. del Valle, F. Carreno and O.A. Ruano: Acta Mater., 2006, vol. 54, pp. 4247–59.10.1016/j.actamat.2006.05.018 ↗
33. S.R. Agnew, D.W. Brown and C.N. Tome: Acta Mater., 2006, vol. 54, pp. 4841–52.10.1016/j.actamat.2006.06.020 ↗
34. M.T. Pérez-Prado and O.A. Ruano: Scripta Mater., 2003, vol. 48, pp. 59–64.10.1016/S1359-6462(02)00346-9 ↗
35. M.T. Pérez-Prado and O.A. Ruano: Scripta Mater., 2002, vol. 46, pp. 149–55.10.1016/S1359-6462(01)01212-X ↗
36. A. Beck: The Technology of Magnesium and its Alloys, F.A. Hughes & Co. Ltd, London, 1940.
37. J. Zhang, W.G. Li and Z.X. Guo: J Magnesium Alloy, 2013, vol. 1, pp. 31-8.10.1016/j.jma.2013.02.012 ↗
38. J. Zhang, F.Q.Yuan and Y. Du: Mater. Des., 2013, vol. 52, pp. 332-36.10.1016/j.matdes.2013.05.074 ↗
39. J. Zhang, R.L. Zuo, Y.X. Chen, F.S. Pan and X.D.Luo: J. Alloys Comp., 2008, vol. 448, pp. 316-320.10.1016/j.jallcom.2006.10.135 ↗
40. J.W. Christian and S. Mahajan: Prog. Mater Sci., 1995, Vol. 39, pp. 1-157.10.1016/0079-6425(94)00007-7 ↗
41. M.A. Meyers, O. Vohringer and V.A. Lubarda: Acta Mater., 2001, vol. 49, pp. 4025–39.10.1016/S1359-6454(01)00300-7 ↗
42. A. Jain, O. Duygulu, D.W. Brown, C.N. Tome and S.R. Agnew: Mater. Sci. Eng. A, 2008, vol. 486, pp. 545–55.10.1016/j.msea.2007.09.069 ↗
43. M.R. Barnett: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1799–806.10.1007/s11661-003-0146-5 ↗
44. S. Sandlöbes, S. Zaefferer, I. Schestakow, S. Yi and R. G. Martinez: Acta Mater., 2011, vol. 59, pp. 429–39.10.1016/j.actamat.2010.08.031 ↗
45. N. Ono, K. Nakamura and S. Miura: Mater. Sci. Forum, 2003, vol. 419–422, pp. 195-200.10.4028/www.scientific.net/MSF.419-422.195 ↗
46. P. Dobron, F. Chmelık, S. Yi, K. Parfenenko, D.Letzig and J. Bohlen: Scripta Mater., 2011, vol. 65, pp. 424–27.10.1016/j.scriptamat.2011.05.027 ↗
47. D.L. Yin, J.T. Wang, J.Q. Liu and X. Zhao: J. Alloys Comp., 2009, vol. 478, pp. 789–95.10.1016/j.jallcom.2008.12.033 ↗
48. J.J He, T.M Liu, S. Xu and Y. Zhang: Mater. Sci. Eng. A, 2013, vol. 579, pp. 1–8.10.1016/j.msea.2013.04.115 ↗
49. J. Geng, Y.B. Chun, N. Stanford, C.H.J. Davies, J.F. Nie and M.R. Barnett: Sci. Eng. A, 2011, vol. 528, pp. 3659-65.10.1016/j.msea.2011.01.024 ↗
50. S.R. Agnew, M.H. Yoo and C.N. Tome: Acta Mater., 2001, vol. 49, pp. 4277–89.10.1016/S1359-6454(01)00297-X ↗