Selected Applications of Aeropropulsion Actuation and Shape Control Devices Using HTSMAs
Source abstract
Abstract
Recent research has contributed to the relatively rapid development of high-temperature shape memory alloys (HTSMAs), materials that combine useful work output with transition temperatures well in excess of the range of typical binary NiTi SMAs. This article describes recent demonstration applications of HTSMAs in devices representative of mechanisms useful for a variety of aeropropulsion applications requiring high transition temperatures. Work to date has chiefly featured application of Pt-doped NiTi alloys in wire form, although some data on the use of Hf-doped alloys has also been generated. The results presented describe benchtop and wind tunnel experiments of demonstration devices employing HTSMA wire actuators. The test results validate operation at 573+ K (300+ °C) and document the force and strain capability of the new alloys. Ongoing and projected work in pertinent areas is also described.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aeroelasticity and Vibration Control · Simulation and Modeling Applications · Vehicle Noise and Vibration Control
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. T.R. Quackenbush, A.H. Boschitsch, P.V. Danilov, and R.M. McKillip, Jr.: High Temperature Shape Memory Alloy Devices for Engine Noise Reduction and Performance Enhancement, Final Report to NASA under contract NNC06CA03C, 2008.
2. B.A. Janardan, G.E. Hoff, J.W. Barter, S. Martens, P.R. Gliebe, V. Mengle, and W.N. Dalton: AST Critical Propulsion and Noise Reduction Technologies for Future Commercial Subsonic Engines: Separate-Flow Exhaust System Noise Reduction Concept Evaluation, NASA /CR-2000-210039, 2000.
3. M. Marcolini and L. Bangert: Quiet Aircraft Technology Project, Proc. 1st Annual NASA Vehicle Systems/Industry Meeting, Atlanta, GA, 2004.
4. S. Martens: Jet Noise Reduction Technology Development at GE Aircraft Engines, ICAS 2002 Congress.
5. N.H. Saiyed, K.L. Mikkelsen, and J.H. Bridges: Acoustics and Thrust of Separate-Flow Exhaust Nozzles With Mixing Devices for High-Bypass-Ratio Engines, AIAA Paper No. 2000-1961, 2000.10.2514/6.2000-1961 ↗
6. P. Gliebe: Aeroacoustics Highlights 2000, Aerospace America, 2000.
7. E. Nesbitt, R. Elkoby, T.R.S. Bhat, P.J.R. Strange, and C. Mead: Correlating Model-Scale & Full-Scale Test Results of Dual Flow Nozzle Jets, AIAA Paper No. 2002-2487, 2002.10.2514/6.2002-2487 ↗
8. F.T. Calkins and G.W. Butler: Subsonic Jet Noise Reduction Variable Geometry Chevron, AIAA Paper No. 2004-190, 2004.10.2514/6.2004-190 ↗
9. L.J.S. Bradbury and A.H. Khadem: J. Fluid Mech., 1975, vol. 70, pp. 801–13.10.1017/S0022112075002352 ↗
10. K.K. Ahuja and W.H. Brown: Shear Flow Control by Mechanical Tabs, AIAA Paper 89-0994.
11. K. Kinzie, B. Henderson, J. Whitmire, and A. Abeysinghe: Fluidic Chevrons for Jet Noise Reduction. Proceedings, ACTIVE 04, 2004.10.2514/6.2005-2888 ↗
12. E.K. Longmire, J.K. Eaton, and C.J. Elkins: AIAA J., 1992, vol. 30, pp. 505–12.10.2514/3.10945 ↗
13. J.M. Seiner and C.E. Grosch: Mixing Enhancement by Tabs in Round Supersonic Jets, AIAA Paper 98-2326, 1998.10.2514/6.1998-2326 ↗
14. M. Samimy, J.H. Kim, and R.S. Clancy: Mixing Enhancement in Supersonic Jets via Nozzle Trailing Edge Modifications, AIAA Paper 97-1877, 1997.10.2514/6.1997-1877 ↗
15. R.H. Thomas, K.W. Kinzie, and P. Pao: Computational Analysis of a Pylon-Chevron Core Nozzle Interaction, 7th AIAA/CEAS Aeroacoustics Conference. Maastricht, The Netherlands, 2001.10.2514/6.2001-2185 ↗
16. J.H. Mabe, F.T. Calkins, and R.T. Ruggeri: Full Scale Flight Tests of An Autonomous Morphing Structure Using SMA Actuators, Paper SPIE 6525-48, 2007.10.1117/12.716381 ↗
17. R.W. Fonda, H.N. Jones, and R.A. Vandermeer: Scripta Mater., 1998, vol. 77, pp. 1031–37.10.1016/S1359-6462(98)00303-0 ↗
18. R.W. Fonda, H.N. Jones, and R.A. Vandermeer: Philos. Mag. A, 1997, vol. 76, pp. 119–33.10.1080/01418619708209965 ↗
19. J. Van Humbeeck: Trans ASME, J. Eng. Mater. Tech., 1999, vol. 121, pp. 98–101.10.1115/1.2816006 ↗
20. R.D. Noebe, T. Biles, and A. Padula: SNiTi-Based High-Temperature Shape-Memory Alloys: Properties, Prospects, and Potential Applications, NASA TM 2004-213104, 2004.
21. R.D. Noebe, T. Biles, and S.A. Padula II: Potential High Temperature Shape Memory Alloy Actuator Material Identified, NASA GRC Research and Tech. Reps, http://www.grc.nasa.gov/WWW/RT/2004/RM/RM13M-noebe1.html, 2005.
22. T.R. Quackenbush, P.F. Batcho, A.J. Bilanin, and B.F. Carpenter: Design, Fabrication, and Test Planning for an SMA-Actuated Vortex Wake Control System, in Proc. of the SPIE Industrial and Commercial Applications of Smart Structures, SPIE, 1998.10.1117/12.310641 ↗
23. T.R. Quackenbush, A.J. Bilanin, and B.F. Carpenter: Test Results for an SMA-Actuated Vortex Wake Control System, in SPIE Smart Structures and Materials 1999, SPIE, 1999.10.1117/12.351545 ↗
24. T.R. Quackenbush and R.M. McKillip, Jr.: Design and Testing of a Variable Geometry Ducted Propulsor Using Shape Memory Alloy Actuation, AIAA Paper 2005-1077, 2005.10.2514/6.2005-1077 ↗
25. B.J. Maclean and B.F. Carpenter: Shape-Memory-Actuated Compliant Control Surface, in SPIE Smart Structures and Materials, SPIE, 1993.
26. M. Pitt, J.P. Dunne, and E.V. White: SAMPSON Smart Inlet Design Overview and Wind Tunnel Test Part II – Wind Tunnel Test, Proc. of SPIE Smart Structures and Materials, 2002, vol. 4698, 2002.10.1117/12.475073 ↗
27. T.R. Quackenbush, A.H. Boschitsch, R.M. McKillip, Jr., and P.V. Danilov: High Temperature Shape Memory Alloy Devices for Engine Noise Reduction and Performance Enhancement, Final Report to NASA under Contract NNC05CA06C, 2007.
28. S. Padula, II, R. Noebe, G. Bigelow, D. Culley, M. Stevens, N. Penney, D. Gaydosh, T. Quackenbush, and B. Carpenter: Development of an HTSMA-Actuated Surge Control Rod for High Temperature Turbomachinery Applications, AIAA Paper 2007-2196, 2007.10.2514/6.2007-2196 ↗