journal article·2011-06

A Study of the Method of Manufacturing Bimaterial Composite Parts through Semisolid Metal Processing

Zhao Yang, Jianxiong Dong, Li Zhou, Li Shen, Wei Zhang

Publisher page

Abstract

This work evaluated the method of manufacturing bimaterial composite parts by semisolid metal processing (SSP) through strain-induced melt-activated thixo-forging. Sn-15 pct Pb and Pb-30 pct Sn semisolid alloys were chosen as model alloys. Bimetal composite parts were manufactured successfully by forging the semisolid alloys into the same die simultaneously. Optical photography, scanning electron microscopy, energy dispersive X-ray spectroscopy, and Vickers hardness were employed to characterize the samples. The results showed that the composite semisolid fluid flowed in a laminar way. Globular primary grains in the two semisolid alloys maintained their respective geometry and constitutions. The mixture of two liquid phases was limited in a thin layer beneath the interface between the two semisolid alloys. The absence of an oxide-enriched layer at the interface suggests that the oxide skins of the feedstock were torn during the processing, leading to the formation of metallurgical bonding at the composite interface. This work showed that SSP is a promising technology for bimaterial/multimaterial composite manufacturing. The bimaterial composite parts achieved by SSP have a good composite interface and well-located material distribution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. M.C. Flemings: Metall. Trans. A, 1991, vol. 22A, pp. 957-68.10.1007/BF02661090 ↗
2. D.H. Kirkwood: Inter. Mater. Rev., 1994, vol. 39, pp. 173-85.10.1179/imr.1994.39.5.173 ↗
3. Z. Fan: Inter. Mater. Rev., 2002, vol. 43, pp. 548-91.
4. D. Liu, H.V. Atkinson, P. Kapranos, W. Jirattiticharoean, and H. Jones: Mater. Sci. Eng. A, 2003, vol. A361, pp. 213-24.10.1016/S0921-5093(03)00528-8 ↗
5. T.K. Nandy, R.M. Messing, J.W Jones, T.M. Pollock, D.M. Walukas, and R.F. Decker: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3725-36.10.1007/s11661-006-1066-y ↗
6. P. Rohatgi and R. Asthana: JOM, 2001, vol. 53, pp. 9-14.10.1007/s11837-001-0060-5 ↗
7. M.Z. Omar, E.J. Palmiere, A.A. Howe, H.V. Atkinson, and P. Kapranos: Mater. Sci. Eng. A, 2005, vol. 395, pp. 53-61.10.1016/j.msea.2004.12.013 ↗
8. M. Haesche, J. Weise, F. Garcia-Moreno, and J. Banhart: Mater. Sci. Eng. A, 2008, vol. 480, pp. 283-88.10.1016/j.msea.2007.07.040 ↗
9. Z. Yang, H.F. Zhang, A.M. Wang, B.Z. Ding, and Z.Q. Hu: 7th Conf. Semisolid Metal Process Composite TSUKUBA, Japan, 2002, pp. 846–50.
10. W. Yoshimi, Y. Kazuhisa, F. Yasuyoshi, and M. Koichi: Mater Sci. Forum, 2005, vol. 475-479, pp. 1503-09.
11. S. Sugiyama, M. Kiuchi, and J. Yanagimoto: J. Mater. Process. Tech., 2008, vol. 201, pp. 623-28.10.1016/j.jmatprotec.2007.11.217 ↗
12. A. Narimannezhad, H. Aashuri, A.H. Kokabi, and A. Khosravani: J. Mater. Process. Tech., 2009, vol. 209, pp. 4112-21.10.1016/j.jmatprotec.2008.10.004 ↗
13. P. Kazanowski, M.E. Epler, and W.Z. Misiolek: Mater. Sci. Eng. A, 2004, vol. 369, pp. 170-80.10.1016/j.msea.2003.11.002 ↗
14. D. Rydz: J. Mater. Process. Tech., 2004, vol. 157-158, 609-12.10.1016/j.jmatprotec.2004.07.122 ↗
15. D. Rydz, H. Dyja, and M. Krakowiak: J. Mater. Process. Tech., 2003, vol. 138, pp. 120-22.10.1016/S0924-0136(03)00059-1 ↗
16. M.H. Apperley, C.C. Sorrell, and A. Crosky: J. Mater. Process. Tech., 2000, vol. 102, pp. 193-202.10.1016/S0924-0136(00)00432-5 ↗
17. Z. Yang: Chinese Patent CN200810143703.4, 2008.
18. L. Zhou, Z. Yang, and W. Zhang: Ann. Conf. Die Cast., Squeeze Cast. and SSP, pp. 422 (in Chinese).
19. K.P. Young, C.P. Kyonka, M. Heights, and J.A. Courtois: U.S. Patent, 4,415,374, 1983.
20. B. Predel: Landolt-Bornstein, Group IV Physical Chemistry – Phase Equilibria, Crystallographic and Thermodynamic Data of Binary Alloys, vol. 5, Springer Verlag, New York, NY, 1991.
21. Z. Yang, C.G. Kang, and P.K. Seo: Scripta Mater., 2005, vol. 52, pp. 283-88.10.1016/j.scriptamat.2004.10.015 ↗
22. ASTM E1245-95, “Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis.”
23. E. Tzimas and A. Zavaliangos: Acta Mater., 1999, vol. 47, pp. 517-28.10.1016/S1359-6454(98)00356-5 ↗
24. M. Kiuchi and R. Kopp: CIRP Ann. Manuf. Tech., 2002, vol. 51, pp. 653-70.10.1016/S0007-8506(07)61705-3 ↗