Effects of Carbides on the Microstructural Evolution in Sub-micron Grain 9310 Steel During Isothermal Heat Treatment
Source abstract
Abstract
Recent interest in bulk ultra-fine-grained microstructures has given rise for the necessity to quantify their behavior during heat treatment should any subsequent thermal processing of the material be necessary after forming. The present study showed that the microstructure of 9310 steel forgings containing varying fractions of sub-micron grains retained some degree of stability after 4 hours of heat treatment between the temperatures of 522 K and 866 K (249 °C and 593 °C, respectively). The behavior of the microstructure during heat treatment was largely influenced by both the carbide volume fraction and distribution, which affected the level of Zener Drag present. This in effect controlled the type of growth behavior exhibited by the ferrite grains and the ability to retain the fine-grained structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. U.J. De Souza and M.F. Amateau: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 183–93.10.1007/s11661-999-0206-6 ↗
2. R. Song, D. Ponge, D. Raabe, J. G. Speer, and D. K. Matlock: Mater. Sci. Eng., A, 2006, vol. 441 (1), pp. 1–17.10.1016/j.msea.2006.08.095 ↗
3. B. Cherukuri, T. S. Nedkova, and R. Srinivasan: Mater. Sci. Eng. A, 2005, vol. 410, pp. 394–97.10.1016/j.msea.2005.08.024 ↗
4. A. K. Padap, G. P. Chaudhari, S. K. Nath, and V. Pancholi: Mater. Sci. Eng. A, 2009, vol. 527 (1), pp. 110–17.10.1016/j.msea.2009.08.066 ↗
5. J. Xing, H. Soda, X. Yang, H. Miura and T. Sakai: Mater. Trans., 2005, vol. 46 (7), pp. 1646–50.10.2320/matertrans.46.1646 ↗
6. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: Acta Mater., 1999, vol. 47 (2), pp. 579–83.10.1016/S1359-6454(98)00365-6 ↗
7. K. Muszka, L. Madej, and J. Majta: Mater. Sci. Eng. A, 2013, vol. 574, pp. 68-74.10.1016/j.msea.2013.03.024 ↗
8. Y. Iwahashi, Z. Horita, M. Nemoto, and T. G. Langdon: Acta Mater., 1998, vol. 46 (9), pp. 3317–31.10.1016/S1359-6454(97)00494-1 ↗
9. R. Z. Valiev and T. G. Langdon: Prog. Mater. Sci., 2006, vol. 51 (7), pp. 881-981.10.1016/j.pmatsci.2006.02.003 ↗
10. M. Furukawa, Y. Iwahashi, Z. Horita, M. Nemoto, and T. G. Langdon: Mater. Sci. Eng., A, 1998, vol. 257, pp. 328–32.10.1016/S0921-5093(98)00750-3 ↗
11. Z. Hegedüs, J. Gubicza, M. Kawasaki, N. Q. Chinh, J. L. Lábár, and T. G. Langdon: J. Mater. Sci., 2013, vol. 48, pp. 4637–45.10.1007/s10853-012-7124-5 ↗
12. A. P. Zhilyaev and T. G. Langdon: Prog. Mater. Sci., 2008, vol. 53, pp. 893-979.10.1016/j.pmatsci.2008.03.002 ↗
13. A.P. Zhilyaev, G.V. Nurislamova, B.-K. Kim, M.D. Baró, J.A. Szpunar, T.G. Langdon: Acta Mater., 2003, vol. 51, pp. 753–65.10.1016/S1359-6454(02)00466-4 ↗
14. A. Azushima, R. Kopp, A. Korhonen, D.Y. Yang, F. Micari, G.D. Lahoti, P. Groche, J. Yanagimoto, N. Tsuji, A. Rosochowski, and A. Yanagida: CIRP Ann. Manuf. Technol., 2008, vol. 57, pp. 716–35.10.1016/j.cirp.2008.09.005 ↗
15. Y. Estrin and A. Vinogradov: Acta Mater., 2013, vol. 61, pp. 782–817.10.1016/j.actamat.2012.10.038 ↗
16. N. Tsuji, Y. Ito, Y. Saito, and Y. Minamino: Scripta Mater., 2002, vol. 47, pp. 893–99.10.1016/S1359-6462(02)00282-8 ↗
17. R. Song, D. Ponge, and D. Raabe: Acta Mater., 2005, vol. 53, pp. 4881–92.10.1016/j.actamat.2005.07.009 ↗
18. R. Z. Valiev, R. K. Islamgaliev, and I. V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45 (2), pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
19. P. B. Prangnell, J. R. Bowen, and P. J. Apps: Mater. Sci. Eng. A, 2004, vol. 375-377, pp. 178–85.10.1016/j.msea.2003.10.170 ↗
20. S. F. Medina and C. A. Hernandez: Acta Mater., 1996, vol. 44 (1), pp. 165–71.10.1016/1359-6454(95)00154-6 ↗
21. I.N. Kunitskaya, Ya.I. Spektor, and V.E. Olshanetskii: Met. Sci. Heat Treat., 2012, vol. 53 (9-10), pp. 498–502.10.1007/s11041-012-9422-6 ↗
22. D. Snyder, E. Y. Chen, C. C. Chen, and S. Tin: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 479–93.10.1007/s11661-012-1381-4 ↗
23. T. Kozmel, E. Y. Chen and C.C. Chen, and S. Tin: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2590–600.10.1007/s11661-014-2212-6 ↗
24. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier Science Ltd., Oxford, 1995.
25. P. Cotterill and P.R. Mould: Recrystallization and Grain Growth in Metals, Halsted Press, New York, 1976.
26. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. JuulJensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238 (2), pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
27. D. H. Shin, B. C. Kim, K.-T. Park, and W. Y. Choo: Acta mater., 2000, vol. 48, pp. 3245–52.10.1016/S1359-6454(00)00090-2 ↗
28. K.-T. Park, Y.-S. Kim, J. G. Lee, and D. H. Shin: Mater. Sci. Eng. A, 2000, vol. 293, pp. 165–72.10.1016/S0921-5093(00)01220-X ↗
29. Y. H. Zhao, X. Z. Liao, Z. Jin, R. Z. Valiev, and Y. T. Zhu: Acta Mater., 2004, vol. 52, pp. 4589–99.10.1016/j.actamat.2004.06.017 ↗
30. D.G. Cole, P. Feltham, and E. Gillam: Proc. Phys. Soc. B, 1954, vol. 67, pp. 131–37.10.1088/0370-1301/67/2/305 ↗
31. C. E. Krill III, L. Helfen, D. Michels, H. Natter, A. Fitch, O. Masson, and R. Birringer: Phys. Rev. Lett., 2001, vol. 86 (5), pp. 842–45.10.1103/PhysRevLett.86.842 ↗
32. G.F. Vander Voort: Atlas of Time-Temperature Diagrams for Irons and Steels, ASM International, Materials Park, OH, 1991, p. 466.
33. N. Tsuji, Y. Matsubara, and Y. Saito: Scripta Mater., 1997, vol. 37, pp. 477–84.10.1016/S1359-6462(97)00123-1 ↗
34. S.V.S. Murty, S. Torizuka, K. Nagai, T. Kitai, and Y. Kogo: Scripta Mater., 2005, vol. 53, pp. 763–68.10.1016/j.scriptamat.2005.05.027 ↗
35. J. Baczynski and J.J. Jonas: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 447–62.10.1007/s11661-998-0125-y ↗
36. J.R. Davis, et al.: ASM Specialty Handbook - Carbon and Alloy steels, ASM International, Metals Park, OH, 1996.
37. W.D. Klopp: Aerospace Structural Metals Handbook, E 9310 (Code 1209), Purdue Research Foundation, 1999.
38. D. Moldovan, V. Yamakov, D. Wolf, and S.R. Phillpot: Phys. Rev. Lett., 2002, vol. 89 (20), pp. 206101-1–206101-4.10.1103/PhysRevLett.89.206101 ↗
39. E. R. Leite, T. R. Giraldi, F. M. Pontes, E. Longo, A. Beltrán, and J. Andrés: Appl. Phys. Lett. (2003), vol. 83 (8), pp. 1566–68.10.1063/1.1605241 ↗
40. K E. Harris, V. V. Singh, and A. H. King: Acta Mater. (1998), vol. 46 (8), pp. 2623–33.10.1016/S1359-6454(97)00467-9 ↗
41. D. Moldovan, D. Wolf, S. R. Phillpot, and A. J. Haslam: Acta Mater. (2002), vol. 50, pp. 3397–3414.10.1016/S1359-6454(02)00153-2 ↗
42. R. E. Reed-Hill and R. Abbaschian: Physical Metallurgy Principles – Third Edition, PWS Publishing Company, Boston, MA, 1994, pp. 519.
43. G. Deep and W. M. Williams: Can. Metall. Q., 1975, vol. 14 (2), pp. 85-96.10.1179/cmq.1975.14.2.85 ↗
44. D. H. Shin, Y.-S. Kim, and E. J. Lavernia: Acta Mater., 2001, vol. 49, pp. 2387–93.10.1016/S1359-6454(01)00165-3 ↗
45. J. Janovec, M. Svoboda, A. Výrostková, and A. Kroupa: Mater. Sci. Eng., A, 2005, vol. 402, pp. 288–93.10.1016/j.msea.2005.04.048 ↗
46. S. Xu, J. I. Dickson, and A. K. Koul: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2687–95.10.1007/s11661-998-0309-5 ↗
47. C. S. Smith: Trans. AIME, 1948, vol. 175, pp. 15–51.
48. T. Gladman: Proc. R. Soc. London, Ser. A, 1966, vol. 294 (1438), pp. 298–309.10.1098/rspa.1966.0208 ↗
49. E. Nes, N. Ryum, and O. Hunderi: Acta Metall., 1985, vol. 33 (1), pp. 11–22.10.1016/0001-6160(85)90214-7 ↗
50. T.V. Cherian, P. Pietrokowsky and J.E. Dorn: Trans. Metall. Soc. AIME, 1949, vol. 185, p. 948
51. E. Hall: Proc. Phys. Soc. B, 1951, vol. 64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
52. N. Petch: J. Iron steel Inst., 1953, vol. 174, pp. 25–28.
53. P. A. Manohar, M. Ferry, and T. Chandra: ISIJ Int., 1998, vol. 38 (9), pp. 913–24.10.2355/isijinternational.38.913 ↗
54. T. Nishizawa, I. Ohnuma, and K. Ishida: Mater. Trans. JIM, 1997, vol. 38(11), pp. 950–56.10.2320/matertrans1989.38.950 ↗