journal article·2006-04

Fracture behavior of niobium by hydrogenation and its application for fine powder fabrication

S. Semboshi, T. J. Konno, N. Masahashi, S. Hanada

Publisher page

Abstract

Fracture behavior of pure niobium (Nb) by several hydrogenation procedures has been investigated to elucidate the fundamental mechanisms of hydrogen pulverization, which can then be used to produce fine Nb powders with high purity. Concentric cracks and microcracks were introduced in recrystallized Nb specimens, leading to pulverization, when they absorb hydrogen enough to form a large volume of the face-centered orthorhombic β-NbH phase. This hydride phase exhibits anisotropic expansion of Nb lattice and embrittlement. Thus, the fracture of Nb plates occurs in the following sequence: hydrogen absorption, the formation of the ordered hydride phase, strain generation arising from the phase transformation, and crack nucleation and propagation. The authors also show that Nb powders less than 1 µm were prepared by hydrogenation and ball-milling at a temperature below 203 K, in which hydrogen was removed by dehydrogenation at above 724 K. Thus, fine and contamination-free Nb powders can be effectively fabricated by using hydrogenation, ball-milling, and dehydrogenation procedures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. K. Kukli, M. Ritala, and M. Leskela: J. Electrochem. Soc., 2001, vol. 148 (2), pp. F35–41.10.1149/1.1343106 ↗
2. L.I. Skatkov and P.G. Cheremsloy: Powder Metall., 2000, vol. 43 (2), pp. 182–84.10.1179/003258900665853 ↗
3. K. Kovacs, G. Kiss, M. Stenzel, and H. Zillgen: J. Electrochem. Soc., 2003, vol. 150 (8), pp. B361–66.10.1149/1.1585052 ↗
4. Y.M. Li and L. Young: J. Electrochem. Soc., 2000, vol. 147, pp. 1344–48.10.1149/1.1393360 ↗
5. N. Eliaz, D. Eliezer, and O.L. Olson: Mater. Sci. Eng. A, 2000, vol. A289, pp. 41–53.10.1016/S0921-5093(00)00906-0 ↗
6. O.N. Senkov and F.H. Froes: Int. J. Hydrogen Energy, 1999, vol. 24, pp. 565–76.10.1016/S0360-3199(98)00112-8 ↗
7. F.H. Froes, O.N. Senkov, and J.I. Qazi: Int. Mater. Rev., 2004, vol. 49 (3–4), pp. 227–45.10.1179/095066004225010550 ↗
8. I.R. Harris and P.J. McGuiness: J. Less-Common Met., 1991, vol. 172–174, pp. 1273–80.10.1016/S0022-5088(06)80037-8 ↗
9. R.E. Smallman, I.R. Harris, and M.A. Duggan: J. Mater. Proc. Tech., 1997, vol. 63, pp. 18–29.10.1016/S0924-0136(96)02595-2 ↗
10. J.J.G. Willems and K.H.J. Buschow: J. Less-Common Met., 1987, vol. 129, pp. 13–30.10.1016/0022-5088(87)90029-4 ↗
11. S. Semboshi, N. Masahashi, and S. Hanada: Acta Mater., 2001, vol. 49, pp. 927–35.10.1016/S1359-6454(00)00371-2 ↗
12. S. Semboshi, N. Masahashi, and S. Hanada: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 685–90.10.1007/s11661-003-0102-4 ↗
13. S. Semboshi, N. Masahashi, and S. Hanada: J. Alloy Compd., 2003, vol. 359, pp. 236–73.10.1016/S0925-8388(03)00200-7 ↗
14. X.G. Li, A. Chiba, K. Ohsaki, Y. Morita, and M. Uda: J. Alloy Compound., 1996, vol. 238, pp. 202–09.10.1016/0925-8388(96)02238-4 ↗
15. S. Semboshi, H. Hosoda, and S. Hanada: J. Jpn. Inst. Met., 1997, vol. 61 (10), pp. 1132–38.10.2320/jinstmet1952.61.10_1132 ↗
16. S. Semboshi, T. Tabaru, H. Hosoda, and S. Hanada: Intermetallics, 1996, vol. 6, pp. 61–69.10.1016/S0966-9795(97)00058-7 ↗
17. M. Kosuge, H. Hosoda, and S. Hanada: J. Jpn. Inst. Metals, 1998, vol. 62 (7), pp. 681–89.10.2320/jinstmet1952.62.7_681 ↗
18. I. Park, T. Okabe, and Y. Waseda: Mater. Trans., 2001, vol. 42, pp. 850–55.10.2320/matertrans.42.850 ↗
19. M. Takizane, T. Fukami, and T. Inaba: ISIJ Int., 1991, vol. 31, pp. 1088–92.10.2355/isijinternational.31.1088 ↗
20. R.J. Welter and W.T. Chandler: Trans. AIME, 1965, vol. 233, pp. 762–65.
21. H. Asano and Hirabayashi: Z. Phys. Chem., vol. 114, pp. 1–19.10.1524/zpch.1979.114.114.001 ↗
22. W.M. Albecht, W.D. Goode, and M.W. Mallett, J. Electrochem. Soc., 1959, vol. 106 (11), pp. 981–86.10.1149/1.2427194 ↗
23. V.G. Vaks and V.I. Zinenko: J. Phys. Condens. Matter, 1989, vol. 1, pp. 9085–100.10.1088/0953-8984/1/46/003 ↗
24. A. Zielinski: J. Mater. Proc. Tech., 2001, vol. 109, pp. 206–14.10.1016/S0924-0136(00)00797-4 ↗
25. M.M. Farahani, F. Attia, and K. Salama: Mater. Trans. A, 1981, vol. 12A, pp. 631–38.10.1007/BF02649738 ↗
26. M.C.C. Lin and K. Salama: Mater. Trans. A, 1997, vol. 28A, pp. 2059–65.10.1007/s11661-997-0162-y ↗
27. Y.B. Park, D.N. Lee, and G. Gottstein: Acta Mater., 1998, vol. 46 (10), pp. 3371–79.10.1016/S1359-6454(98)00052-4 ↗
28. J.B. Nelson and D.P. Riley: Proc. Phys. Soc, 1945, vol. 57, pp. 160–62.10.1088/0959-5309/57/3/302 ↗
29. P. Bowen, J. Sheng, and N. Jongen: Powder Tech., 2002, vol. 128 (2–3), pp. 256–61.10.1016/S0032-5910(02)00182-1 ↗
30. G. Brauer and B. Hermann: Z. Anorg. Chem, 1953, vol. 274, pp. 11–23.10.1002/zaac.19532740103 ↗
31. G.T. Hahn, A. Gilbert, and R.I. Jaffee: in Refractory Metal Alloys, edited by I. Machlin, R.T. Begley, and E.D. Weisert, Metallurgical Society of AIME. Refractory Metals Committee, Washington DC, 1968, pp. 23–63.
32. W. Pesch, T. Schober, and H. Wenzl: Scr. Metall, 1978, vol. 12, pp. 815–20.10.1016/0036-9748(78)90042-X ↗
33. T. Morita and H. Ino: J. Phys. Soc. Jpn., 1979, vol. 46 (6), pp. 1776–84.10.1143/JPSJ.46.1776 ↗
34. R. Balasubramaniam: Acta Mater., 1993, vol. 41 (12), pp. 3341–49.10.1016/0956-7151(93)90215-E ↗
35. H.K. Birnbaum, M.L. Grossbeck, and M. Amono: J. Less-Common Met., 1976, vol. 49, pp. 357–70.10.1016/0022-5088(76)90048-5 ↗
36. S. Gahr, B.J. Makenas, and H.K. Birnbaum: Acta Mater., 1980, vol. 28, pp. 1207–13.10.1016/0001-6160(80)90075-9 ↗
37. H. Matsui, N. Yoshikawa, and M. Koiwa: Acta Mater., 1987, vol. 35 (2), pp. 413–26.10.1016/0001-6160(87)90248-3 ↗
38. T. Plackowski, N.I. Sorokina, and D. Wlosewicz: J. Phys. Condens. Matter, 1998, vol. 10, pp. 1259–66.10.1088/0953-8984/10/6/009 ↗
39. J.M. Welter and F. Schondube: J. Phys. F: Met. Phys, 1983, vol. 13, pp. 529–44.10.1088/0305-4608/13/2/027 ↗
40. B.J. Makenas and H.K. Birnbaum: Acta Metall., 1982, vol. 30, pp. 469–81.10.1016/0001-6160(82)90227-9 ↗
41. H. Sugimoto and Y. Fukai: Phys. Rev. B: Condens. Matter Mater. Phys., 1980, vol. 22 (2), pp. 670–80.10.1103/PhysRevB.22.670 ↗