Dynamic deformation and fracture behavior of ultrafine-grained aluminum alloy fabricates by equal-channel angular pressing
Source abstract
Abstract
In the present study, ultrafine-grained microstructures of a conventional 5083 aluminum alloy were fabricated by equal-channel angular pressing, and their dynamic deformation and fracture behavior were investigated. Dynamic torsional tests were conducted on four aluminum alloy specimens using a torsional Kolsky bar, and then the test data were analyzed in relation to microstructures, tensile properties, and adiabatic shear-banding behavior. The equal-channel angular-pressed (ECAP) specimens consisted of ultrafine grains and contained a considerable amount of second-phase particles, which were refined and distributed homogeneously in the matrix as the equal-channel angular pressing pass number increased. The dynamic torsional test results indicated that the maximum shear stress increased, while the fracture shear strain remained constant, with increasing equal-channel angular pressing pass number. Observation of the deformed area beneath the dynamically fractured surface showed that a number of voids initiated mainly at second-phase particle/matrix interfaces and that the number of voids increased with increasing pass number. Adiabatic shear bands of 200 to <300 µm in width were formed in the as-extruded and 1-pass ECAP specimens having coarser particles, whereas they were hardly formed in the four-pass and eight-pass ECAP specimens having finer particles. The possibility of adiabatic shear-band formation was explained by concepts of absorbed deformation energy and void initiation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. R.Z. Valiev, N.A. Krasilnikov, and N.K. Tsenev: Mater. Sci. Eng. A, 1991, vol. A137, pp. 35–40.10.1016/0921-5093(91)90316-F ↗
2. V.M. Segal: Mater. Sci. Eng. A, 1995, vol. A197, pp. 157–64.10.1016/0921-5093(95)09705-8 ↗
3. J.C. Lee, H.K. Seok, and J.Y. Suh: Acta Mater., 2002, vol. 50, pp. 4005–19.10.1016/S1359-6454(02)00200-8 ↗
4. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: Acta Mater., 1999, vol. 47, pp. 579–83.10.1016/S1359-6454(98)00365-6 ↗
5. N.A. Akhmadeev, N.P. Kobelev, R.R. Mulyukov, Y.M. Soifer, and R.Z. Valiev: Acta Mater., 1993, vol. 41, pp. 1041–46.10.1016/0956-7151(93)90153-J ↗
6. M.V. Markushev, C.C. Bampton, M. Yu. Murashkin, and D.A. Hardwick: Mater. Sci. Eng. A, 1997, vols. A234–A236, pp. 927–31.10.1016/S0921-5093(97)00333-X ↗
7. S.Y. Chang, J.G. Lee, K.-T. Park, and D.H. Shin: Mater. Trans., 2001, vol. 42, pp. 1074–80.10.2320/matertrans.42.1074 ↗
8. D.H. Shin, B.C. Kim, Y.C. Kim, and K.T. Park: Acta Mater., 2000, vol. 48, pp. 2247–55.10.1016/S1359-6454(00)00028-8 ↗
9. A. Inoue, H. Kimura, and S.I. Yamaura: Met. Mater. Int., 2003, vol. 9, pp. 527–36.10.1007/BF03027251 ↗
10. G.H. Lee, C.K. Rhee, W.W. Kim, and V.V. Ivanov: Met. Mater. Int., 2003, vol. 9, pp. 379–82.10.1007/BF03027191 ↗
11. Y. Fukuda, K. Oh-ishi, Z. Horita, and T.G. Langdon: Acta Mater., 2002, vol. 50, pp. 1359–68.10.1016/S1359-6454(01)00441-4 ↗
12. S. Lee, D. Kwon, Y.K. Lee, and O. Kwon: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1093–1100.10.1007/BF02670605 ↗
13. D. Jia, K.T. Ramesh, and E. Ma: Acta Mater., 2003, vol. 51, pp. 3495–3509.10.1016/S1359-6454(03)00169-1 ↗
14. K. Ohtera, A. Inoue, and T. Masumoto: Mater. Sci. Eng. A, 1991, vol. A134, pp. 1212–14.10.1016/0921-5093(91)90958-P ↗
15. H. Nagahama, K. Ohtera, K. Higashi, A. Inoue, and T. Masumoto: Phil. Mag. Lett., 1993, vol. 67, pp. 225–30.10.1080/09500839308240933 ↗
16. Q. Wei, T. Jiao, S.N. Mathaudhu, E. Ma, K.T. Hartwig, and K.T. Ramesh: Mater. Sci. Eng., 2003, vol. A358, pp. 266–72.10.1016/S0921-5093(03)00305-8 ↗
17. G.T. Gray III, T.C. Lowe, C.M. Cady, R.Z. Valiev, and I.V. Aleksandrov: Nanostr. Mater., 1997, vol. 9, pp. 477–80.10.1016/S0965-9773(97)00104-9 ↗
18. K.M. Cho, S. Lee, S.R. Nutt, and J. Duffy: Acta Mater., 1993, vol. 41, pp. 923–32.10.1016/0956-7151(93)90026-O ↗
19. B. Hwang, H.S. Lee, S. Lee, B.D. Ahn, D.H. Shin, and C.G. Lee: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 389–97.10.1007/s11661-005-0310-1 ↗
20. K. Cho, Y.C. Chi, and J. Duffy: Metall. Trans. A, 1990, vol. 21A, pp. 1161–75.10.1007/BF02698247 ↗
21. S.P. Timothy and I.M. Hutching: Acta Metall., 1985, vol. 33, pp. 667–76.10.1016/0001-6160(85)90030-6 ↗
22. L. Dupuy and J.-J. Blandin: Acta Mater., 2002, vol. 50, pp. 3251–64.
23. C.C. Koch: Scripta Mater., 2003, vol. 49, pp. 657–62.10.1016/S1359-6462(03)00394-4 ↗
24. R. Valiev: Nature Mater., 2004, vol. 3, pp. 511–16.10.1038/nmat1180 ↗
25. C.G. Lee and S. Lee: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 227–35.10.1007/s11661-998-0175-1 ↗
26. C.G. Lee, K.J. Kim, S. Lee, and K. Cho: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 469–76.10.1007/s11661-998-0127-9 ↗
27. C.L. Wittman, M.A. Meyers, and H.-R. Pak: Metall. Trans. A, 1990, vol. 21A, pp. 707–16.10.1007/BF02671941 ↗
28. M.A. Meyers, Y.B. Xu, Q. Xue, M.T. Perez-Prado, and T.R. McNelley: Acta Mater., 2003, vol. 51, pp. 1307–25.10.1016/S1359-6454(02)00526-8 ↗
29. D-G. Lee, S. Kim, S. Lee, and C.S. Lee: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 315–24.10.1007/s11661-001-0263-y ↗
30. M.A. Meyer and C.L. Wittman: Metall. Trans. A, 1990, vol. 21A, pp. 3153–64.10.1007/BF02647311 ↗
31. C. Zenner and J.H. Hollomon: J. Appl. Phys., 1944, vol. 15, pp. 22–32.10.1063/1.1707363 ↗
32. J.W. Hutchinson: Scripta Metall., 1987, vol. 18, pp. 421–22.10.1016/0036-9748(84)90414-9 ↗