journal article·2020-01

Characterization of Martensite Orientation Relationships in Steels and Ferrous Alloys from EBSD Data Using Bayesian Inference

A. F. Brust, E. J. Payton, V. Sinha, V. A. Yardley, S. R. Niezgoda

Publisher page

Abstract

Detailed analysis of the characteristics a martensite structure inherits from the parent austenite phase requires knowledge of the crystallographic orientation relationship between austenite and martensite, which varies with composition for steel alloys. The orientation relationship is typically observed to exhibit a significant degree of variability, such that measurements from each variant occupy a range of orientations within the transformed pole figure, complicating characterization of the orientation relationship. Here, we present a Bayesian methodology to measure the orientation relationship on martensite EBSD data from four different steels and a binary Fe-Ni alloy. The number of variants that must be exhibited for an accurate measurement as well as robustness to noisy data for this approach are investigated. The Bayesian approach is found to produce results which compare favorably to those from prior work while being more easily automatable.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. S. Morito and Y. Adachi and T. Ohba: Mater. Trans., 2009, vol. 50, pp. 1919–23.10.2320/matertrans.MRA2008409 ↗
2. H. Kitahara, R. Ueji, N. Tsuji and Y. Minamino: Acta Mater. 2006, vol. 54,pp. 1279-88.10.1016/j.actamat.2005.11.001 ↗
3. S. Morito, H. Tanaka, R. Konishi and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789-99.10.1016/S1359-6454(02)00577-3 ↗
4. V.A. Yardley, E.J. Payton, T. Matsuzaki, R. Sugiura, A.T. Yokobori Jr., S. Tsurekawa and Y. Hasegawa: Creep and Fracture of Engineering Materials and Structures, Proc. 12th Int. Conf. Creep and Fracture of Eng. Mater. and Struct. (JIMIS 11), held at Kyoto TERRSA, Kyoto, Japan, May 27–31, 2012, Edited by: K.Maruyama, F.Abe, M.Igarashi, K.Kishida, M.Suzuki, K.Yoshimi, The Jap. Ins. of Met, Sendai, 2012, paper C14.
5. K. Kimura, N. Ohi, K. Shimazu and T. Matsuo: Scripta Mater., 1987, vol. 21, pp. 19-22.10.1016/0036-9748(87)90399-1 ↗
6. V.A. Yardley, S. Fahimi and E.J. Payton: Mater. Sci. Technol, 2015, vol. 31, pp. 547-53.10.1179/1743284714Y.0000000603 ↗
7. S.H. Hong and J. Yu: Scripta Mater. 1989, vol. 23, pp. 1057-62.10.1016/0036-9748(89)90299-8 ↗
8. S.K. Banerji, C.J. McMahon Jr. and H.C. Feng: Metall. Trans. A, 1978, vol. 9A, pp. 237-47.10.1007/BF02646706 ↗
9. R.M. Horn and R.O. Ritchie: Metall. Trans. A, 1978, vol. 9A, pp.1039-53.10.1007/BF02652208 ↗
10. G. Kurdjumow and G. Sachs: Über der Mechanismus der Stahlhärtung (On the Mechanism of Hardening of Steel). Z. Physik, 1930, vol. 64, pp. 325-43.10.1007/BF01397346 ↗
11. Z. Nishiyama: X-ray Investigation of the mechanism of the tranformation from face-centered cubic to body-centered cubic. Sci. Rep., 1934, vol. 23, pp. 637-64.
12. G. Wassermann: Über den Mechanismus der $$\alpha ->\gamma $$ Umwandlung des Eisens (On the Mechanism of the $$\alpha -> \gamma $$ Transformation of Iron). Mitteilungen aus dem Kaiser Wilhelm Institut für Eisenforschung, 1935, vol. 17, pp. 149–55.
13. A. B. Greninger and A. R. Troiano: Metall. Trans., 1949, vol. 185, pp. 590-98.
14. G. Miyamoto, N. Iwata, N. Takayama and T. Furuhara: Acta Mater., 2010, vol. 58, pp.6393-6403.10.1016/j.actamat.2010.08.001 ↗
15. E.J. Payton, A. Aghajani, F. Otto, G. Eggler and V.A. Yardley: Scripta Mater., 2012, vol. 66, pp. 1045-48.10.1016/j.scriptamat.2012.02.042 ↗
16. M.S. Wechsler, D.S. Lieberman and T.A. Read: Trans. AIME, 1953, vol. 197, pp. 1503-15.
17. J.S. Bowles and J.K. Mackenzie: Acta. Metall. 1954, vol. 2, pp. 129-37.10.1016/0001-6160(54)90102-9 ↗
18. J.K. Mackenzie and J.S. Bowles: Acta. Metall. 1954, vol. 2, pp. 138-47.10.1016/0001-6160(54)90103-0 ↗
19. J.S. Bowles and J.K. Mackenzie: Acta. Metall. 1954, vol. 2, pp. 224-34.10.1016/0001-6160(54)90163-7 ↗
20. J.K. Mackenzie and J.S. Bowles (1957) Acta. Metall. vol. 5, pp. 137–49.10.1016/0001-6160(57)90018-4 ↗
21. J.S. Bowles and J.K. Mackenzie: Acta Metall. 1962, vol. 10, pp. 625-636.10.1016/0001-6160(62)90052-4 ↗
22. Z. Nishiyama, M.E. Fine, and C.M. Wayman (1978) Martensitic Transformation, Cambridge. Academic Press
23. C.M. Wayman (1964) Introduction to the Crystallography of Martensitic Transformations. . London
24. H. Kitahara, R. Ueji, M. Ueda, N. Tsuji and Y. Minamino: Mater. Charact., 2005, vol. 54, pp. 378-386.10.1016/j.matchar.2004.12.015 ↗
25. M. Nikravesh, M. Naderi, G.H. Akbari: Mater. Sci. Eng., 2012, vol. 540, pp. 24-29.10.1016/j.msea.2012.01.018 ↗
26. L. Malet and M.R. Barnett and P.J. Jacques and S. Godeta: Scripta Mater., 2009, vol. 61, pp. 520-23.10.1016/j.scriptamat.2009.05.015 ↗
27. G. Miyamoto and N. Takayama and T. Furuhara: Scripta Mater., 2009, vol. 60, pp. 1113-16.10.1016/j.scriptamat.2009.02.053 ↗
28. A.H. Pham and T. Ohba and S. Morito and T. Hayashi: Mater. Char., 2017, vol. 132, pp. 108-18.10.1016/j.matchar.2017.08.007 ↗
29. V.A. Yardley and E.J. Payton: Mater. Sci. Technol., 2014, vol. 30, pp. 1125-30.10.1179/1743284714Y.0000000572 ↗
30. E. Gomes and L.A.I. Kerstens: IOP Conf. Series: Mater. Sci. Eng., 2015, vol. 82, pp. 1-4.
31. N.Y. Zolotorevsky and S.N. Panpurin and A.A. Zisman and S.N. Petrov: Mater. Char., 2015, vol. 107, pp. 278-82.10.1016/j.matchar.2015.07.023 ↗
32. T. Nyyssönen and M. Isakov and P. Peura and V.T. Kuokkala: Met. Mater. Trans. A, 2016, vol. 47, pp. 2587-90.10.1007/s11661-016-3462-2 ↗
33. F. Bachmann and R. Hielscher and H. Schaeben: J. Appl. Crystallogr., 2010, vol. 43, pp. 1338-55.10.1107/S002188981003027X ↗
34. E.C. Bain: Trans. Am. Inst. Min. Met. Eng., 1924, vol. 70, pp. 25.
35. T. Bayes: Philos. Trans. R. Soc. Lond. 1764, vol. 53, pp. 370-428.
36. A.F. de Vos: Preprint, 2004.
37. B.M. Hill: J. Am. Stat. Assoc., 1968, vol. 63, pp. 677-91.10.1080/01621459.1968.11009286 ↗
38. B.A. Olshausen: Retrieved from: http://www.rctn.org/bruno/npb163/bayes.pdf, 2004.
39. J.M. Bernardo and A.F.M Smith: Wiley, 2009.
40. N. Metropolis and A.W. Rosenbluth and M.N. Rosenbluth and A.H. Teller and E. Teller: J. Chem. Phys., 1953, vol. 21, pp. 1087-92.10.1063/1.1699114 ↗
41. W.K. Hastings: Biometrika, 1970, vol. 57, pp. 97-109.10.1093/biomet/57.1.97 ↗
42. C.J. Geyer: Stat. Sci., 1992, vol. 7, pp. 473-511.
43. D. Gamerman and H. Lopes: Chapman and Hall/CRC, 2006.
44. A.F. Brust and S.R. Niezgoda and V.A. Yardley and E.J. Payton: Met. Trans. Mater. A, 2018, vol. 50, pp. 837-55.10.1007/s11661-018-4977-5 ↗
45. M. Natori, Y. Futamura, T. Tsuchiyama, S. Takaki: Scripta Mater., 2005, vol. 53, pp. 603–08.10.1016/j.scriptamat.2005.04.025 ↗
46. A.F. Brust and T.J. Hobbs and E.J. Payton and S.R. Niezgoda: Microsc. Microanal., 2019, vol. 25, pp. 924-41.10.1017/S1431927619014569 ↗
47. R. Abrahams: Unit. Sts. Pat. Appl. Pub., US 2016/0369362 A1.
48. V. Sinha, E.J. Payton, M. Gonzales, R. A. Abrahams, B.S. Song: Metallogr. Microstruct. Anal. 2017, vol. 6(6), pp. 610-18.10.1007/s13632-017-0403-4 ↗
49. Y. He and Q. Rao and Y. Tan: J. Cent. South Univ. Technol., 1996, vol. 3, pp. 122-34.10.1007/BF02652191 ↗
50. G. Krauss: ASM International, 1990.
51. S. Matsuda, T. Inoue, H. Mimura and Y. Okamura: Climax Molybdenum Development Company, Ltd., Japan, 1971, pp. 45–66.
52. Z. Guo, C.S. Lee and J.W. Morris: Acta. Mater., 2004, vol. 52(19), pp. 5511-18.10.1016/j.actamat.2004.08.011 ↗
53. S. Morito, H. Yoshida, T. Maki and X. Huang: J. Mat. Sci. Eng. A, 2006, 438-440, pp. 237-40.10.1016/j.msea.2005.12.048 ↗
54. M. Ueda and H. Yasuda and Y. Umakoshi: Sci. Technol. Adv. Mater., 2001, vol. 3, pp. 171-79.10.1016/S1468-6996(02)00004-9 ↗