journal article·2018-12

Orientation-Dependent Developments in Misorientation and Residual Stress in Rolled Aluminum: The Defining Role of Dislocation Interactions

Arijit Lodh, Ujjal Tewary, Ram Pratap Singh, Tawqeer Nasir Tak, Aditya Prakash, Alankar Alankar, P. J. Guruprasad, Indradev Samajdar

Publisher page

Abstract

Orientation-dependent developments in misorientation and residual stress, in rolled aluminum, were quantified experimentally and simulated numerically. The latter involved analysis using a crystal plasticity finite element model, accounting for anisotropies in slip system hardening but neglecting near-neighbor interactions, and discrete dislocation dynamics of the single crystals. Both were successful in capturing the experimental patterns of orientation dependence. Numerical simulations, without slip transfer across the neighboring grains, thus established the defining role of dislocation interactions in establishing orientation-sensitive microstructural evolution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. FJ Humphreys and M Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Pergamon Materials Series, Elsevier, Oxford, 2004.
2. B Verlinden, J Driver, I Samajdar and RD Doherty: Thermo-Mechanical Processing of Metallic Materials, 1st ed., Pergamon Materials Series, Elsevier, Oxford, 2007.
3. N Hansen, X Huang and G Winther: Mater. Sci. Eng., A, 2008, vol. 494, pp. 61-67.10.1016/j.msea.2007.10.086 ↗
4. A. Lodh, T. N. Tak, A. Prakash, P. J. Guruprasad, C. Hutchinson and I. Samajdar: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 5317-31.10.1007/s11661-017-4280-x ↗
5. C.C. Merriman, D.P. Field and P. Trivedi: Mater. Sci. Eng., A, 2008, vol. 494, pp. 28-35.10.1016/j.msea.2007.10.090 ↗
6. LP Kubin and G Canova, Scr. Metall. et Mater. 1992, vol. 27, pp. 957-62.10.1016/0956-716X(92)90456-O ↗
7. LP Kubin, G Canova, M Condat, B Devincre, V Pontikis and Y Bréchet: Solid State Phenomenon, Trans Tech Publ, Switzerland, 1992, pp 455-72.
8. H M Zbib, M Rhee and JP Hirth: Int. J. Mech. Sci., 1998, vol. 40, pp. 113-27.10.1016/S0020-7403(97)00043-X ↗
9. L. Anand and M. Kothari, J. Mech. Phys. Solids 1996, vol. 44, pp. 525-58.10.1016/0022-5096(96)00001-4 ↗
10. D. Peirce, R. J. Asaro and A. Needleman, Acta Metall. 1982, vol. 30, pp. 1087-1119.10.1016/0001-6160(82)90005-0 ↗
11. F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler and D. Raabe, Acta Mater., 2010, vol. 58, pp. 1152-1110.1016/j.actamat.2009.10.058 ↗
12. EB Marin and PR Dawson, Comput. Methods Appl. Mech. Eng. 1998, vol. 165, pp. 1-21.10.1016/S0045-7825(98)00034-6 ↗
13. E.B. Marin, On the formulation of a crystal plasticity model, 2006. https://doi.org/10.2172/890604.10.2172/890604 ↗
14. Benoît Devincre, Ladislas Kubin and Thierry Hoc, Scripta Mater. 2006, vol. 54, pp. 741-46.10.1016/j.scriptamat.2005.10.066 ↗
15. P Shanthraj and MA Zikry, Acta Mater. 2011, vol. 59, pp. 7695-7702.10.1016/j.actamat.2011.08.041 ↗
16. T. Ungár, A. D. Stoica, G. Tichy and X.-L. Wang: Acta Mater., 2014, vol. 66, pp. 251-6110.1016/j.actamat.2013.11.012 ↗
17. Halle Abrams, Metallography 1971, vol. 4, pp. 59-78.10.1016/0026-0800(71)90005-X ↗
18. A. Alankar, I.N. Mastorakos and D.P. Field: Acta Mater., 2009, vol. 57, pp. 5936-4610.1016/j.actamat.2009.08.028 ↗
19. A. Arsenlis and D.M. Parks: J. Mech. Phys. Solids, 2002, vol. 50, pp. 1979-2009.10.1016/S0022-5096(01)00134-X ↗
20. N Bertin, CN Tomé, IJ Beyerlein, MR Barnett and L Capolungo, Int. J. Plast. 2014, vol. 62, pp. 72-92.10.1016/j.ijplas.2014.06.010 ↗
21. M. Khadyko, S. Dumoulin, G. Cailletaud and O. S. Hopperstad: Int. J. Plast., 2016, vol. 76, pp. 51-7410.1016/j.ijplas.2015.07.010 ↗
22. N. Keskar, S. Mukherjee, K.V.M. Krishna, D. Srivastava, G.K. Dey, P. Pant, R.D. Doherty and I. Samajdar: Acta Mater., 2014, vol. 69, pp. 265-74.10.1016/j.actamat.2014.01.023 ↗
23. O. Engler and V. Randle: Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping, CRC press, Boca Raton, 2009.10.1201/9781420063660 ↗
24. Y. D. Wang, R. L. Peng and R. L. McGreevy: Philos. Mag. Lett., 2001, vol. 81, pp. 153-63.10.1080/09500830010017088 ↗
25. R. Hielscher and H. Schaeben: J. Appl. Crystallogr., 2008, vol. 41, pp. 1024-37.10.1107/S0021889808030112 ↗
26. Niels Hansen, Xiaoxu Huang, Wolfgang Pantleon and Grethe Winther, Philos. Mag. 2006, vol. 86, pp. 3981-94.10.1080/14786430600654446 ↗
27. Xiao-xu Huang and Grethe Winther, Philos. Mag. 2007, vol. 87, pp. 5189-5214.10.1080/14786430701652851 ↗
28. J. Jiang, T. B. Britton and A. J. Wilkinson: Int. J. Plast., 2015, vol. 69, pp. 102-11710.1016/j.ijplas.2015.02.005 ↗
29. JS Kallend and YC Huang, Metal Sci. 1984, vol. 18, pp. 381-86.10.1179/030634584790419890 ↗
30. N Rajmohan and JA Szpunar, Mater. Sci. Technol. 1999, vol. 15, pp. 1259-1265.10.1179/026708399101505365 ↗
31. D.D. Sam and B.L. Adams: Metall. Mater. Trans. A, 1986, vol. 17A, pp. 513-1710.1007/BF02643958 ↗
32. Y.D. Wang, R. L. Peng and R.L. McGreevy: Philos. Mag. Lett., 2001, vol. 81, pp. 153-6310.1080/09500830010017088 ↗
33. X. Feaugas and H. Haddou: Philos. Mag., 2007, vol. 87, pp. 989-1018.10.1080/14786430601019441 ↗
34. Erik Van der Giessen and Alan Needleman, Modell. Simul. Mater. Sci. Eng. 1995, vol. 3, p. 689.10.1088/0965-0393/3/5/008 ↗
35. AA Benzerga, Y Bréchet, A Needleman and E Van der Giessen, Modell. Simul. Mater. Sci. Eng. 2003, vol. 12, p. 159.10.1088/0965-0393/12/1/014 ↗
36. F. Roters, P. Eisenlohr, T. R. Bieler and D. Raabe: Crystal Plasticity Finite Element Methods: in Materials Science and Engineering, Wiley, New York, 2011.