Alloy Design Based on Computational Thermodynamics and Multi-objective Optimization: The Case of Medium-Mn Steels
Source abstract
Abstract
A new alloy design methodology is presented for the identification of alloy compositions, which exhibit process windows (PWs) satisfying specific design objectives and optimized for overall performance. The methodology is applied to the design of medium-Mn steels containing Al and/or Ni. By implementing computational alloy thermodynamics, a large composition space was investigated systematically to map the fraction and stability of retained austenite as a function of intercritical annealing temperature. Alloys exhibiting PWs, i.e., an intercritical annealing range, which when applied satisfies the given design objectives, were identified. A multi-objective optimization method, involving Pareto optimality, was then applied to identify a list of optimum alloy compositions, which maximized retained austenite amount and stability, as well as intercritical annealing temperature, while minimized overall alloy content. A heuristic approach was finally employed in order to rank the optimum alloys. The methodology provided a final short list of alloy compositions and associated PWs ranked according to their overall performance. The proposed methodology could be the first step in the process of computational alloy design of medium-Mn steels or other alloy systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. R.L. Miller: Metall. Mater. Trans. B, 1972, vol. 3, pp. 905–12.10.1007/BF02647665 ↗
2. Z.H. Cai, H. Ding, R.D.K. Misra, and S.Q. Qiguan: Mater. Sci. Eng. A, 2016, vol. 652, pp. 205–11.10.1016/j.msea.2015.11.084 ↗
3. S. Lee and B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44, pp. 5018–24.10.1007/s11661-013-1860-2 ↗
4. R. Rana, P.J. Gibbs, E. De Moor, J.G. Speer, and D.K. Matlock: Steel Res. Int., 2015, vol. 86, pp. 1139–50.10.1002/srin.201400577 ↗
5. J. Hu, W. Cao, C. Huang, C. Wang, H. Dong, and J. Li: ISIJ Int., 2015, vol. 55, pp. 2229–36.10.2355/isijinternational.ISIJINT-2015-187 ↗
6. K. Sugimoto, H. Tanino, and J. Kobayashi: Steel Res. Int., 2015, vol. 86, pp. 1151–60.10.1002/srin.201400585 ↗
7. X. Zhao, Y. Shen, L. Qiu, Y. Liu, X. Sun, and L. Zuo: Materials, 2014, vol. 7, pp. 7891–7906.10.3390/ma7127891 ↗
8. Z.H. Cai, H. Ding, X. Xue, J. Jiang, Q.B. Xin, and R.D.K. Misra: Scripta Mater., 2013, vol. 68, pp. 865–68.10.1016/j.scriptamat.2013.02.010 ↗
9. Z.H. Cai, H. Ding, X. Xue, and Q.B. Xin: J. Mater. Eng. Perform., 2012, vol. 23, pp. 1131–37.10.1007/s11665-014-0866-2 ↗
10. A. Grajcar, P. Skrzypczyk, and D. Wozniak: Arch. Metall. Mater., 2014, vol. 59, pp. 1691–97.10.2478/amm-2014-0286 ↗
11. M. Cai, Z. Li, Q. Chao, and P.D. Hodgson: Metall. Mater. Trans. A, 2014, vol. 45, pp. 5624–34.10.1007/s11661-014-2504-x ↗
12. D.W. Suh and S.J. Kim: Scripta Mater., 2016, vol. 126, pp. 63–67.10.1016/j.scriptamat.2016.07.013 ↗
13. S. Kang, E. De Moor, and J.G. Speer: Metall. Mater. Trans. A, 2015, vol. 46, pp. 1005–1110.1007/s11661-014-2708-0 ↗
14. H. Kamoutsi, E. Gioti, G.N. Haidemenopoulos, Z. Cai, and H. Ding: Metall. Mater. Trans. A, 2015, vol. 46, pp. 4841–46.10.1007/s11661-015-3118-7 ↗
15. P.J. Gibbs, E. De Moor, M.J. Merwin, B. Clausen, J.G. Speer, and D.K. Matlock: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3691–3702.10.1007/s11661-011-0687-y ↗
16. H.L. Lukas, S.G. Fries, and B. Sundman: Computational Thermodynamics the Calphad Method, 1st ed., Cambridge University Press, Cambridge, 2007.10.1017/CBO9780511804137 ↗
17. J.O. Andersson, T. Helander, L. Höglund, P. Shi, B. Sundman: Calphad, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
18. K. Andrews: J. Iron Steel Inst., 1965, vol. 203, pp. 721–27.
19. D. Koistinen and R. Marburger: Acta Metall., 1959, vol. 7, pp. 59–60.10.1016/0001-6160(59)90170-1 ↗
20. Y. Censor: Appl. Math. Optim., 1977, vol. 4, pp. 41–59.10.1007/BF01442131 ↗
21. O. Grodzevich and O. Romanko: Proc. First Fields-MITACS Ind. Probl. Workshop, Toronto, Canada, 2006, pp. 89–101.
22. W. Jakob and C. Blume: Algorithms, 2014, vol. 7, pp. 166–85.10.3390/a7010166 ↗
23. I.Y. Kim and O.L. de Weck: Struct. Multidiscip. Optim., 2006, vol. 31, pp. 105–16.10.1007/s00158-005-0557-6 ↗
24. R.W. Saaty: Math. Model., 1987, vol. 9, pp. 161–76.10.1016/0270-0255(87)90473-8 ↗
25. H.A. Taha: Operations Research: An Introduction, 8th ed., Pearson, Upper Sadle River, NJ, 2007, pp. 490–500.
26. T.L. Saaty: Int. J. Serv. Sci., 2008, vol. 1, pp. 83–98.
27. H. Huang, O. Matsumura, and T. Furukawa: Mater. Sci. Technol., 1994, vol. 10, pp. 621–26.10.1179/mst.1994.10.7.621 ↗
28. E. Gioti, H. Kamoutsi, and G.N. Haidemenopoulos: Proc. 2nd Int. Conf. High Manganese Steel, Aachen, Germany, 2014, pp. 337–40.
29. S. Chen, Y. Bao, H. Dong, and W. Cao: Adv. Mater. Res., 2014, vol. 1063, pp. 3–6.10.4028/www.scientific.net/AMR.1063.3 ↗