Development of Fine-Grained, Low-Carbon Bainitic Steels with High Strength and Toughness Produced Through the Conventional Hot-Rolling and Air-Cooling
Source abstract
Abstract
Low-carbon bainitic steels have created enormous interest among scientists across the world in the past few decades because of their high strength, toughness, and weldability replacing the conventional quenched and tempered medium-carbon steels. Three experimental steels with varying alloy additions were made in a 100-kg laboratory induction furnace and cast into 100-mm-diameter cylindrical ingots. These ingots were hot-rolled and air-cooled to 6-mm plates in an experimental rolling mill with selected thermomechanical parameters. Steels processed through this process provided an ultrafine low-carbon bainitic microstructure with maximum yield strength (YS) and ultimate tensile strength (UTS) 575 and 705 MPa, respectively. The Charpy impact toughness of the experimental steels was excellent, and at 253 K (–20 °C), it varied from 114 to 170 Joules. Cu-B-added steel was found to give an optimum combination of strength, YS-575 MPa, and toughness, 114 J at 253 K (–20 °C). Thus, fine-grained, low-carbon bainitic steels could be developed with a proper combination of alloying elements and thermomechanical parameters even by air-cooling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. D.V. Edmonds: Proc. Mechanical Working and Steel Processing Proceedings, 1989, pp. 455–64.
2. H.K.D.H. Bhadesia: Bainite in Steels, Cambridge University Press, UK, 1992.
3. H. Ohtani, S. Okaguchi, Y. Fujishiro, and Y. Ohmori: Metall. Trans. A, 1990, vol. 21A, pp. 877-88.10.1007/BF02656571 ↗
4. H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 2004, vol. 378, pp. 34-9.10.1016/j.msea.2003.10.328 ↗
5. N.J. Kim and Y.G. Kim: Mater. Sci. Eng. A, 1990, vol. 129, pp. 35-44.10.1016/0921-5093(90)90342-Z ↗
6. S. Das, A. Ghosh, S. Chatterjee, and P. Ramachandrarao: Scripta Mater., 2003, vol. 48, pp. 51-7.10.1016/S1359-6462(02)00345-7 ↗
7. A. Ghosh, S. Das, S. Chatterjee, B. Mishra, and P. Ramachandrarao: Mater. Sci. Eng. A, 2003, vol. 348, pp. 299-308.10.1016/S0921-5093(02)00735-9 ↗
8. I. Tamura, H. Sekine, T. Tanaka, and C. Ouchi: Thermomechanical Processing of High-Strength Low-Alloy Steels, Butterworth & Co. Ltd., London, U.K., 1988, pp. 80-100.10.1016/B978-0-408-11034-1.50007-6 ↗
9. B. Hwang, S. Lee, Y.M. Kim, N.J. Kim, and J.Y. Yoo: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1793-805.10.1007/s11661-005-0043-1 ↗
10. P. Cizek, B.P. Wynne, C.H.J. Davies, B.C. Muddle, and P.D. Hodgson: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1331-49.10.1007/s11661-002-0059-8 ↗
11. S.Y. Shin, S.Y. Han, B. Hwang, C.G. Lee, and S. Lee: Mater. Sci. Eng. A, 2009, vol. 17, pp. 212-8.10.1016/j.msea.2009.03.052 ↗
12. A.A. Gorni and P.R. Mei: J. Mater. Process. Tech., 2005, pp. 298–303.10.1016/j.jmatprotec.2005.02.042 ↗
13. M. Soliman and H. Palkowski: ISIJ Int., 2007, vol. 47, pp. 1703-10.10.2355/isijinternational.47.1703 ↗
14. J. Barford and G. Willoughby: Metal Scripta. J., 1971, vol. 5, p. 32.10.1179/030634571790439748 ↗
15. M.C. Murphy and G.D. Branch: ISIJ, 1971, vol. 209, pp. 546-61.
16. G.E. Hollox, R.A. Hobbs, and J.M. Hampshire: Wear, 1981, vol. 68, pp. 229-40.10.1016/0043-1648(81)90091-0 ↗
17. S.K. Dhua and P.P. Sarkar: Mater. Sci. Eng. A, 2013, vol. 575, pp. 177-88.10.1016/j.msea.2013.03.052 ↗
18. K.I. Irvine and F.B. Pickering: ISIJ, 1963, vol. 201, p. 508.
19. G.R. Speich, L.J. Cuddy, C.R. Gordon, and A.K.J. De Ardo: Proc., Int. Conf. on Phase Transformations in Ferrous Alloys, ASM, Cleveland, OH, 1984, pp. 341–92.
20. A. Ghosh, B. Mishra, S. Das, and S. Chatterjee: Mater. Sci. Eng. A, 2005, vol. 396, pp. 320-32.10.1016/j.msea.2005.01.050 ↗
21. B. Hwang, C.G. Lee, and T.-H. Lee: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 85-96.10.1007/s11661-009-0070-4 ↗
22. X.M. Wang and X.L. He: ISIJ Int., 2002, vol. 42, pp. S38-46.10.2355/isijinternational.42.Suppl_S38 ↗
23. Y. Ohmori and K. Yamanaka: Boron in Steel, Eds. S.K. Banerji and J.E. Morral, The Metallurgical Society of AIME, Warrendale, PA, 1980, pp. 44–60.
24. J.E. Morral and T.B. Cameron: Boron in Steel, S.K. Banerji and J.E. Morral, eds., The Metallurgical Society of AIME, Warrendale, PA, 1980, pp. 19–43.
25. H. Martensson: Scand. J. Metall., 1972, vol. 1, pp. 319-26.
26. A.J. McEvily and C.L. Magee: Low-Alloy Steels, Iron and Steel Institute, London, U.K., 1968, pp. 111-8.
27. P.P. Hydrean, J.E. Chard, and C.H. Shelton: Proc., 14th Mechanical and Working and Steel Processing Conference, AIME, NY, vol. 10, 1972.
28. ASTM E8-04: Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 2004.
29. ASTM E23-92: Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1992.
30. S. Patra, S. Neogy, V. Kumar, D. Chakraborti, and A. Haldar: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4296-310.10.1007/s11661-012-1213-6 ↗
31. G. Gomez, T. Perez, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2009, vol. 25, pp. 1508-12.10.1179/174328408X388149 ↗
32. J. Chakraborty, D. Bhattacharjee, and I. Manna: Scripta Mater., 2009, vol. 61, pp. 604-7.10.1016/j.scriptamat.2009.05.035 ↗
33. J. Chakraborty, P.P. Chattopadhyay, D. Bhattacharjee, and I. Manna: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2871-9.10.1007/s11661-010-0288-1 ↗
34. J. Chakraborty and I. Manna: Mater. Sci. Eng. A, 2012, vol. 548, pp. 33–42.10.1016/j.msea.2012.03.056 ↗
35. A.A. Barani, F. Li, P. Romano, D. Ponge, and D. Raabe, Mater. Sci. Eng. A, 2007, vol. 463, pp. 138-46.10.1016/j.msea.2006.08.124 ↗
36. F.R. Xiao, B. Liao, Y.Y. Shan, G.Y. Qiao, Y. Zhang, C. Zhang, and K. Yang: Mater. Sci. Eng. A, 2006, vol. 431, pp. 41-52.10.1016/j.msea.2006.05.029 ↗
37. H. Gondoh, H. Nakasugi, H. Matsuda, H. Tamehiro, and H. Chino: Nippon Steel Tech, Rep., 1979, vol. 14, p. 55.
38. S.C. Wang and P.W. Kao: J. Mater. Sci., 1993, vol. 28, pp. 5169-75.10.1007/BF00570058 ↗
39. S.K. Dhua, D. Mukerjee, and D.S. Sarma: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2259-70.10.1007/s11661-001-0201-z ↗
40. S.K. Dhua, D. Mukerjee, and D.S. Sarma: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 241-53.10.1007/s11661-003-0326-3 ↗
41. B.L. Bramfitt and J.G. Speer: Metall. Trans. A, 1990, vol. 21A, pp. 817-29.10.1007/BF02656565 ↗
42. G. Krauss and S.W. Thompson: ISIJ, 1995, vol. 35, pp. 937-45.10.2355/isijinternational.35.937 ↗
43. Y. Ohmori: Trans. ISIJ, 1971, vol. 11, p. 339.10.2355/isijinternational1966.11.339 ↗
44. I. Weiss and J.J. Jonas: Metall. Trans. A, 1979, vol. 10A, p. 831.10.1007/BF02658301 ↗
45. C.I. Garcia, A.K. Lis, and A.J. DeArdo: Metallurgy of Vacuum-Degassed Steel Products, R. Pradhan, ed., The Minerals, Metals & Materials Society, Warrendale, PA, 1990, pp. 451–65.
46. Z. Hua, L.Chang-ming, D. Zhao-jun, H. Rong-dong, and Z. Lin: Proc. Conf., Materials Science and Technology (MS&T), October 25–29, 2009, Pittsburgh, PA, pp. 1232–37.
47. A. Guo, R.D.K. Misra, J. Xu, B. Guo, and S.G. Jansto: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3886-92.10.1016/j.msea.2010.02.067 ↗
48. K. Fujiwara, S. Okaguchi, and H. Ohtani: ISIJ Int., 1995, vol. 35, pp. 1006-12.10.2355/isijinternational.35.1006 ↗
49. H.J. McQueen: Metall. Trans. A, 8A, 1977, p. 807.10.1007/BF02661562 ↗
50. H. Beladi, I.B. Timokhina, X.Y. Xiong, and P.D. Hodgson: Acta Mater., 2013, vol. 61, pp. 7240-50.10.1016/j.actamat.2013.08.029 ↗
51. J.R. Yang, C.Y. Huang, and C.S. Chiou: ISIJ Int., 1995, vol. 35, pp. 1013-9.10.2355/isijinternational.35.1013 ↗
52. M. Djahazi, X. He, and J. Jones: Mater. Sci. Technol., 1992, vol. 8, p. 628.10.1179/mst.1992.8.7.628 ↗
53. G. Krauss: Microstructure, Processing and Properties of Steel, Properties and Selection: Iron, Steel and High Performance Alloys, vol. 1, Metals Handbook, 10th ed., American Society for Metals, Materials Park, OH, 1990, pp. 126–39.10.31399/asm.hb.v01.a0001008 ↗
54. M. Sudo and I. Kokubo: Scand. J. Metall., 1984, vol. 13, pp. 329-42.
55. G. Krauss: Principles of Heat Treatment of Steel, ASM, Materials Park, OH, 1980, p. 163.