journal article·2001-03

Interdiffusion in the TiO2 oxidation product of Ti3Al

I. C. I. Okafor, X. Wen, R. G. Reddy Acipco

Publisher page

Abstract

Oxidation experiments have been conducted on Ti3Al in the temperature range 1023 to 1273 K in a one-atmosphere pure oxygen environment. The oxidation products were analyzed using the scanning electron microscope (SEM), energy-dispersive spectrometer (EDS), and X-ray diffraction (XRD) techniques and found to be predominantly TiO2 (rutile). The oxidation rate was observed to obey the parabolic rate law. Diffusivity data were obtained using the parabolic rate constant for interdiffusion of Ti and O in the oxide layer. Parabolic rate constants were calculated from oxidation rate data, and Valenci equations for flat sheets were used to calculate diffusion coefficients. The activation energy, Q, was found to be 295.43±5.90 kJ/mol, and the frequency factor, D 0, was calculated to be 0.68±0.01 m2/s for oxygen in the TiO2. The activation energy obtained in this study matches closely with that of oxygen diffusion in TiO2 reported in the literature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Catalytic Processes in Materials Science · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. R.E. Schafrik: Metall. Trans. B, 1976, vol. 7B, pp. 713–16.10.1007/BF02698608 ↗
2. R. Haul and G. Dumbgen: J. Phys. Chem. Solids, 1965, vol. 26, pp. 1–10.10.1016/0022-3697(65)90066-1 ↗
3. D.L. Ventaku and L.E. Poteat: Mater. Sci. Eng., 1969–70, vol. 5, pp. 258–62.
4. Y. Oishi and W.D. Kingery: J. Chem. Phys., 1960, vol. 33, pp. 905–6.10.1063/1.1731286 ↗
5. K.P.D. Lagerlof, T.E. Michell, and A.H. Heuer, in Solute-Defect Interaction, S. Saimoto, G.R. Prudy, and G.V. Kidson, eds., Pergamon Press, Elmsford, NY, 1986, p. 152.
6. P. Kofstad: Non Stoichiometry. Diffusion and Electrical Conductivity in Binary Metal Oxides, Robert E. Krieger Publishing Company, Malabar, FL, 1983, p. 100.
7. P. Kofstad: J. Phys. Chem. Solids, 1983, vol. 44(2), pp. 129–33.10.1016/0022-3697(83)90161-0 ↗
8. X. Wen and R.G. Reddy: EPD Congr. ’98, TMS, Warrendale, PA, 1998, pp. 903–24.
9. R.G. Reddy, X. Wen, and Y. Li: Titanium Extraction and Processing, B. Mishra and G.J. Kipouros, eds., TMS, Warrendale, PA, 1997, pp. 153–61.
10. R.G. Reddy and X. Wen: EPD Congr., TMS, Warrendale, PA, 1997, pp. 47–54.
11. X. Wen and R.G. Reddy: Processing and Fabrication of Advanced Materials, TMS, Warrendale, PA, 1996, pp. 379–89.
12. S.G. Kumar and R.G. Reddy: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1121–26.10.1007/BF02649780 ↗
13. N.H. Mohd-Noor and R.G. Reddy: in Physical Chemistry of Powder Metals, Production and Processing, W.M. Small, ed., TMS, Warrendale, PA, 1989, pp. 473–88.
14. G. Welsch and A.I. Kahveci: Oxidation of High Temperature Intermetallic, T. Grobstein and J. Doychak, eds., TMS, Warrendale, PA, 1988, pp. 207–18.
15. A. Rahmel and P.J. Spencer: Oxid. Met., 1991, vol. 35, pp. 53–68.10.1007/BF00666500 ↗
16. J. Unnam, R.N. Shenoy, and R.K. Clark: Oxid. Met., 1986, vol. 26(3–4), pp. 231–52.10.1007/BF00659186 ↗
17. W.D. Kingery, H.K. Bowen, and D.R. Uhlmann: Introduction to Ceramics, 2nd ed, Wiley, New York, NY, 1976, p. 240.
18. P. Shewmon: Diffusion in Solids, McGraw-Hill, New York, NY, 1963.
19. O.W. Johnson: Phys. Rev., 1964, vol. 136, p. 284.10.1103/PhysRev.136.A284 ↗
20. H.B. Huntington and G.A. Sullivan: Phys. Rev. Lett., 1965, vol. 14, pp. 177–8.10.1103/PhysRevLett.14.177 ↗
21. V.N. Bogomolov: Sov. Phys. Solid State, 1964, vol. 5, pp. 1468–9.
22. J.L. Steele and E.R. McCartney: Nature, 1969, vol. 222, p. 79.10.1038/222079a0 ↗
23. P.I. Kingsbury, Jr., W.D. Ohlsen, and O.W. Johnson: Phys. Rev., 1968, vol. 175, p. 1099.10.1103/PhysRev.175.1099 ↗
24. T. Nakayama and T. Sasaki: Bull. Chem. Soc. Jpn., 1963, vol. 36, p. 569.10.1246/bcsj.36.569 ↗
25. L.N. Larikov: in Intermetallic Compounds: Vol. 1, Principles, J.H. Westbrook and R.L. Fleischer, es., John Wiley and Sons Ltd., New York, NY, 1994, pp. 757–70.