Self-joining of Si3N4 using metal interlayers
Source abstract
Abstract
This work focuses on various aspects of diffusion bonding of Ti-foil and Nb-foil interlayers during the self-joining of Si3N4. Joints were diffusion joined by hot-uniaxial pressing at temperatures ranging from 1200 °C to 1600 °C using different holding times. The microstructural characterization of the resulting interfaces was carried out by scanning electron microscopy, electron-probe microanalysis (EPMA), and X-ray diffraction. The results showed that Si3N4 could not be bonded to Ti at temperatures lower than 1400 °C; however joining was successful at higher temperatures. On the other hand, Si3N4 was solid-state bonded to Nb at temperatures ranging from 1200 °C to 1600 °C. Joining occurred by the formation of a reactive interface on the metal side of the joint. Ti5Si3, TiSi, and TiN were detected at the Si3N4/Ti interface, and Nb5Si3 and NbSi2 at the Si3N4/Nb interface, resulting from high-temperature reaction between Ti or Nb and Si3N4. Four-point bending testing gave a maximum joint strength of 147 MPa for Si3N4/Ti/Si3N4 samples hot pressed at 1500 °C and 120 minutes. However, strong joints were obtained above 1450 °C (>100 MPa). These results indicated that there is a strong relationship between the thickness of the interface and the mechanical strength of the preceding joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. A.P. Tomsia: J. Phys. IV, 1993, vol. 3, pp. 1317–26.
2. N.D. Tinsley, J. Huddleston, and M.R. Lacey: Mater. Manufacturing Proc., 1998, vol. 13 (4), pp. 491–98.10.1080/10426919808935271 ↗
3. M.R. Locatelli, B.J. Dalgleish, K. Nakashima, A.P. Tomsia, and A.M. Glaeser: Cer. Int., 1997, vol. 23, pp. 313–22.10.1016/S0272-8842(96)00024-7 ↗
4. K. Suganuma, T. Okamoto, and M. Koizumi: Com. Am. Cer. Soc., 1983, pp. c-117–c-18.
5. R.M. Anderson: Adv. Mater. Proc., 1989, vol. 3, pp. 31–36.
6. E. Martinelli and R.A.L. Drew: Mater. Sci. Eng. A, 1995, vol. 191, pp. 239–47.10.1016/0921-5093(94)09633-8 ↗
7. J. Lemus, C. Wan, and R.A.L. Drew: 9th CIMTEC—World Ceramics Congress: Getting into the 2000’s—Part C, P. Vincenzini, ed., Techna, Italy, 1999, pp. 1043–50.
8. K. Suganuma, T. Okamoto, M. Shimada, and M. Koizumi: Mater. Sci. Technol., 1986, vol. 2, pp. 1156–61.10.1179/026708386790328542 ↗
9. D.W. Richerson: Modern Ceramic Engineering, 2nd ed., Marcel Dekker, New York, NY, 1991, pp. 162–85.
10. J.L. Murray: Phase Diagrams of Binary Titanium Alloys, ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 458–61.
11. J. Lemus and R.A.L. Drew: Br. Cer. Trans., 2000, vol. 99 (5), pp. 200–05.10.1179/096797800680947 ↗
12. H.C. Cao, M.D. Thouless, and A.G. Evans: Acta Metall., 1988, vol. 36 (8), pp. 2037–46.10.1016/0001-6160(88)90305-7 ↗
13. M.H. El-Sayed, M. Naka, and J.C. Schuster: J. Mater. Sci., 1997, vol. w32, pp. 2715–31.10.1023/A:1018639525958 ↗
14. O.M. Akselsen: J. Mater. Sci., 1992, vol 27 (3), pp. 569–79.10.1007/BF02403862 ↗
15. T. Okamoto: Iron Steel Inst. Jpn. Int., 1990, vol. 30 (12), pp. 1033–34.10.2355/isijinternational.30.1033 ↗