Solidification Behavior and Microstructural Evolution of Near-Eutectic Zn-Al Alloys under Intensive Shear
Source abstract
Abstract
The effect of intensive shear on the solidification behavior and microstructural evolution of binary Zn-Al alloys is presented at hypoeutectic, eutectic, and hypereutectic compositions. It is found that the intensive shear, applied on the eutectic melt prior to solidification at a temperature above but close the eutectic temperature, can significantly reduce the size of eutectic cells, but the solidified microstructure still remains the lamellar morphology. For applying intensive shear on the melt during solidification, the nucleation occurs at temperatures very close to the equilibrium condition and requires very small undercooling for both the primary solidification and the eutectic solidification. The intensive shear can significantly alter the microstructural morphology. In contrast to the dendritic morphology formed in the conventional solidification, the primary Al-rich phase in hypoeutectic Zn-Al alloy and the primary Zn-rich phase in hypereutectic Zn-Al alloy under intensive shear exhibit fine and spherical particles, respectively. The lamellae morphology of Zn-rich phase and Al-rich phase formed in the conventional eutectic solidification exhibit fine and spherical particles. The increase of intensity of shear promotes the independence of solid Zn-rich particles and Al-rich particles during the eutectic solidification, resulting in the uniform and separate distribution of two solid particles in the matrix. It is speculated that the high intensity of shear can result in the independent nucleation of individual eutectic phase throughout the whole melt, and the separate growth of solid phases in the subsequent solidification.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. K.A. Jackson, J.D. Hunt: Trans. TMS-AIME, 1966, vol. 236, p. 1129
2. J.D. Verhoeven, R.H. Homer: Metall. Trans., 1970, vol. 1, pp. 3437–4510.1007/BF03037876 ↗
3. D.J. Larson: ASTP Summary Science Report, NASA, Washington, DC, 1976, pp. 449–70
4. J.M. Quenisset, R. Naslain: J. Cryst. Growth, 1981, vol. 54, p. 46510.1016/0022-0248(81)90500-5 ↗
5. J.M. Quenisset, R. Sokolowski, M.E. Glicksman: J. Cryst. Growth, 1983, vol. 63, p. 38910.1016/0022-0248(83)90229-4 ↗
6. J.Z. Jin, K.F. Kobayashi, P.H. Shingu: Metall. Trans. A, 1984, vol. 15A, p. 307
7. M. Li, T. Mori, H. Iwasaki: Mater. Sci. Eng., 1999, vol. A265, p. 21710.1016/S0921-5093(98)01123-X ↗
8. N. Apaydin: J. Mater. Sci. Lett., 1982, vol. 1, p. 3910.1007/BF00724716 ↗
9. Y.J. Chen, S.H. Davis: Acta Mater., 2001, vol. 49, p. 136310.1016/S1359-6454(01)00046-5 ↗
10. Y.J. Chen, S.H. Davis: Acta Mater., 2002, vol. 50, p. 226910.1016/S1359-6454(02)00040-X ↗
11. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, NY, 1996, pp. 41–46
12. S. Ji, Z. Fan, M. Bevis: Mater. Sci. Eng., 2001, vol. A299, p. 21010.1016/S0921-5093(00)01373-3 ↗
13. C. Rauwendaal: Polymer Extrusion, 3rd rev. ed., Hanser, New York, NY, 1994, pp. 89–97
14. J.L. Murray: Bull. Alloy Phase Diagrams, 1983, vol. 4, p. 5510.1007/BF02880321 ↗
15. L.S. Turng, K.K. Wang: J. Mater. Sci., 1991, vol. 26, p. 217310.1007/BF00549185 ↗
16. S. Ji, Z. Fan: Metall. Mater. Trans. A, 2002, vol. 33A, p. 351110.1007/s11661-002-0338-4 ↗
17. W. Kurz, D. Fisher: Fundamentals of Solidification, 3rd ed., Trans Tech Publications, Aedermannsdorf, Switzerland, 1989, p. 293
18. C.J. Smithells: Metal References Book, 6th ed., ASM INTERNATIONAL, Metals Park, OH, 1983, pp. 798–806
19. S.H. Davis: Handbook of Crystal Growth, D.T.J. Hurle, ed., Elsevier Science Publisher, New York, NY, p. 861
20. R. Elliott: Eutectic Solidification Processing, Butterworth & Co Ltd., London, 1983