journal article·2011-11

Effect of Strain Rate on Plastic Flow in Zr-Based Metallic-Glass-Reinforced Porous Tungsten Matrix Composites

Y. F. Xue, L. Wang, H. N. Cai, F. C. Wang, H. W. Cheng, H. F. Zhang, A. M. Wang

Publisher page

Abstract

The rate-dependent deformation of Zr38Ti17Cu10.5Co12Be22.5 bulk metallic-glass-reinforced porous tungsten matrix composites was investigated over a wide range of strain rates. The composites were examined in two forms: the as-cast composite and the as-extruded composite by extrusion. In addition to showing greater strain hardening, the as-cast composite also shows much more obvious strain rate dependence of flow stress than the as-extruded composite. Microhardness tests were performed on the tungsten and the metallic glass phase in both composites, respectively. The results from the microhardness measurements indicate that the strain rate sensitivity of the as-extruded composite is primarily a result of strain rate sensitivity of the tungsten phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. H.A. Bruck, T. Christman, A.J. Rosakis, and W.L. Johnson: Scripta Metall. Mater., 1994, vol. 30, pp. 429–34.10.1016/0956-716X(94)90598-3 ↗
2. H.A. Bruck, A.J. Rosakis, and W.L. Johnson: J. Mater. Res., 1996, vol. 11, pp. 503–08.10.1557/JMR.1996.0060 ↗
3. R.D. Conner, A.J. Rosakis, W.L. Johnson, and D.M. Owen: Scripta Mater., 1997, vol. 37, pp. 1373–78.10.1016/S1359-6462(97)00250-9 ↗
4. C.J. Gilbert, R.O. Ritchie, and W.L. Johnson: Appl. Phys. Lett., 1997, vol. 71, pp. 476–78.10.1063/1.119610 ↗
5. J. Jayaraj, D.J. Sordelet, D.H. Kim, Y.C. Kim, and E. Fleury: Corros. Sci., 2006, vol. 48, pp. 950–64.10.1016/j.corsci.2005.04.006 ↗
6. Z.F. Zhang, J. Eckeit, and L. Schultz: Acta Mater., 2003, vol. 51, pp. 1167–79.10.1016/S1359-6454(02)00521-9 ↗
7. T. Mukai, T.G. Nieh, Y. Kawamura, A. Inoue, and K. Higashi: Intermetallics, 2002, vol. 10, pp. 1071–77.10.1016/S0966-9795(02)00137-1 ↗
8. D.V. Louzguine, H. Kato, and A. Inoue: Appl. Phys. Lett., 2004, vol. 84, pp. 1088–89.10.1063/1.1647278 ↗
9. A. Inoue: Acta Mater., 2000, vol. 48, pp. 279–306.10.1016/S1359-6454(99)00300-6 ↗
10. H. Choi-Yim, R. Busch, U. Köster, and W.L. Johnson: Acta Mater., 1999, vol. 47, pp. 2455–62.10.1016/S1359-6454(99)00103-2 ↗
11. K.Q. Qiu, A.M. Wang, H.F. Zhang, B.Z. Ding, and Z.Q. Hu: Intermetallics, 2002, vol. 10, pp. 1283–88.10.1016/S0966-9795(02)00136-X ↗
12. H. Kato and A. Inoue: Mater. Trans. JIM, 1997, vol. 38, pp. 793–800.10.2320/matertrans1989.38.793 ↗
13. Z. Bian, M.X. Pan, Y. Zhang, and W.H. Wang: Appl. Phys. Lett., 2002, vol. 81, pp. 4739–41.10.1063/1.1530371 ↗
14. F. Szuecs, C.P. Kim, and W.L. Johnson: Acta Mater., 2001, vol. 49, pp. 1507–13.10.1016/S1359-6454(01)00068-4 ↗
15. C. Fan, C.F. Li, A. Inoue, and V. Haas: Phys. Rev. B, 2000, vol. 61, pp. 3761–63.10.1103/PhysRevB.61.R3761 ↗
16. C.C. Hays, C.P. Kim, and W.L. Johnson: Phys. Rev. Lett., 2000, vol. 84, pp. 2901–04.10.1103/PhysRevLett.84.2901 ↗
17. Y.F. Sun, B.C. Wei, Y.R. Wang, W.H. Li, T.L. Cheung, and C.H. Sheka: Appl. Phys. Lett., 2005, vol. 87, pp. 051905-1–051905-3.
18. Z. Bian, G. He, and G.L. Chen: Scripta Mater., 2002, vol. 46, pp. 407–12.10.1016/S1359-6462(01)01233-7 ↗
19. R.L. Narayan, K. Boopathy, S. Indrani, D.C. Hofmann, and U. Ramamurty: Scripta Mater., 2010, vol. 63, pp. 768–71.10.1016/j.scriptamat.2010.06.010 ↗
20. K. Boopathy, D.C. Hofmann, W.L. Johnson, and U. Ramamurty: J. Mater. Res., 2009, vol. 24, pp. 3611–19.10.1557/jmr.2009.0439 ↗
21. R.D. Conner, R.B. Dandliker, and W.L. Johnson: Acta Mater., 1998, vol. 46, pp. 6089–6102.10.1016/S1359-6454(98)00275-4 ↗
22. H.F. Zhang, A.M. Wang, H. Li, W.S. Sun, B.Z. Jing, Z.Q. Hu, H.N. Cai, L. Wang, and W. Li: J. Mater. Res., 2006, vol. 21, pp. 1351–54.10.1557/jmr.2006.0166 ↗
23. Y.F. Xue, H.N. Cai, L. Wang, F.C. Wang, and H.F. Zhang: Appl. Phys. Lett., 2007, vol. 90, pp. 081901-1–081901-3.
24. Y.F. Xue, H.N. Cai, L. Wang, F.C. Wang, H.F. Zhang, and Z.Q. Hu: Compos. Sci. Technol., 2008, vol. 68, pp. 3396–3400.10.1016/j.compscitech.2008.09.026 ↗
25. H.A. Bruck, A.J. Rosakis, and W.L. Johnson: J. Mater. Res., 1996, vol. 11, pp. 503–11.10.1557/JMR.1996.0060 ↗
26. G. Subhash, R.J. Dowding, and L.J. Kecskes: Mater. Sci. Eng., 2002, vol. A334, pp. 33–40.10.1016/S0921-5093(01)01768-3 ↗
27. H. Li, G. Subhash, X.L. Gao, L.J. Kecskes, and R.J. Dowding: Scripta Mater., 2003, vol. 49, pp. 1087–92.10.1016/j.scriptamat.2003.08.012 ↗
28. T. Mukai, T.G. Nieh, Y. Kawamura, A. Inoue, and K. Higashi: Intermetallics, 2002, vol. 10, pp. 1071–77.10.1016/S0966-9795(02)00137-1 ↗
29. T.C. Hufnagel, T. Jiao, Y. Li, L.Q. Xing, and K.T. Ramesh: J. Mater. Res., 2002, vol. 17, pp. 1441–45.10.1557/JMR.2002.0214 ↗
30. L.F. Liu, L.H. Dai, Y.L. Bai, B.C. Wei, and G.S. Yu: Intermetallics, 2005, vol. 13, pp. 827–32.10.1016/j.intermet.2005.01.012 ↗
31. J. Zhang, J.M. Park, D.H. Kim, and H.S. Kim: Mater. Sci. Eng., 2007, vols. A449–A451, pp. 290–94.10.1016/j.msea.2006.02.405 ↗
32. Y.F. Xue, H.N. Cai, L. Wang, F.C. Wang, and H.F. Zhang: Mater. Sci. Eng., 2008, vol. A473, pp. 105–10.10.1016/j.msea.2007.04.044 ↗
33. J. Lankford, C.E. Anderson, and S.R. Bodner: J. Mater. Sci. Lett., 1998, vol. 7, pp. 1355–58.10.1007/BF00719982 ↗
34. J. Lankford, H. Couque, A. Bose, and C.E. Anderson: Shock Waves and High Strain Rate Phenomena in Materials, Marcel Dekker, New Strain, NY, 1992.
35. T. Jiao, L.J. Kecskes, T.C. Hufnagel, and K.T. Ramesh: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3439–44.10.1007/s11661-004-0180-y ↗
36. H. Li, G. Subbash, L.J. Kecskes, and R.J. Dowding: Mater. Sci. Eng., 2005, vol. A403, pp. 134–43.10.1016/j.msea.2005.04.053 ↗
37. Y.F. Xue, H.N. Cai, L. Wang, F.C. Wang, and H.F. Zhang: Mater. Sci. Eng., 2007, vols. A445–A446, pp. 275–80.10.1016/j.msea.2006.09.025 ↗
38. Y.F. Xue, H.N. Cai, L. Wang, H.F. Zhang, and H.W. Cheng: J. Beijing Inst. Technol., 2008, vol. 17, pp. 109–14.
39. G. Subhash, Y.J. Lee, and G. Ravichandran: Acta Metall. Mater., 1994, vol. 42, pp. 319–30.10.1016/0956-7151(94)90074-4 ↗
40. P.S. Follansbee: Inst. Phys. Conf. Ser., 1989, vol. 102, pp. 213–20.
41. K.T. Ramesh and R.S. Coates: Metall. Mater. Trans. A, 1992, vol. 23A, pp. 2625–30.10.1007/BF02658066 ↗
42. W.S. Lee, C.F. Lin, and G.L. Xiea: Mater. Sci. Eng., 1998, vol. A247, pp. 102–12.10.1016/S0921-5093(97)00774-0 ↗
43. C.A. Schuh, T.C. Hufnagel, and U. Ramamurty: Acta Mater., 2007, vol. 55, pp. 4067–4109.10.1016/j.actamat.2007.01.052 ↗