Effect of Temperature and Dynamic Loading on the Mechanical Properties of Copper-Alloyed High-Strength Interstitial-Free Steel
Source abstract
Abstract
Crash resistance and formability relevant mechanical properties of a copper-alloyed interstitial-free (IF) steel processed under various conditions of batch annealing (BA), continuous annealing (CA), and postcontinuous annealing aging have been studied in a wide range of strain rate (3.33 × 10−4 to 200 s−1) and temperature (−100 °C to +20 °C). These properties have been compared with similarly processed traditional mild and high-strength IF steels. Assessment of various parameters such as strength, elongation, strain rate sensitivity of stress, strain-hardening capacity, temperature sensitivity of stress, activation volume, and specific energy absorption of all these steels implies that copper-alloyed IF steel is soft and formable in CA condition. It can be made stronger and more crash resistant than the conventional mild- or high-strength IF steels when aged to peak strength after CA. Room-temperature strain rate sensitivity of stress of the investigated steels exhibits a two-stage behavior. Copper in solution in ferrite causes solid solution softening at low temperatures (≤20 °C) and at high strain rates (200 s−1).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. S. Hoile: Mater. Sci. Technol., 2000, vol. 16, pp. 1079–93.10.1179/026708300101506902 ↗
2. H. Takechi: ISIJ Int., 1994, vol. 34, pp. 1–8.10.2355/isijinternational.34.1 ↗
3. X. Yang, D. Vandershueren, J. Dilewijns, C. Standaert, and Y. Houbaert: ISIJ Int., 1996, vol. 36, pp. 1286–94.10.2355/isijinternational.36.1286 ↗
4. M. Hua, C.I. Garcia, and A.J. DeArdo: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1769–80.10.1007/s11661-997-0108-4 ↗
5. M. Pricryl, Y.P. Lin, and S.V. Subramanian: Scripta Metall. Mater., 1990, vol. 24, pp. 375–80.10.1016/0956-716X(90)90273-J ↗
6. T. Senuma: ISIJ Int., 2001, vol. 41, pp. 520–32.10.2355/isijinternational.41.520 ↗
7. R. Rana, W. Bleck, S.B. Singh, and O.N. Mohanty: Mater. Lett., 2007, vol. 61, pp. 2919–22.10.1016/j.matlet.2006.10.037 ↗
8. E. Hornbogen and R.C. Glenn: Trans. TMS- AIME, 1960, vol. 218, pp. 1064–70.
9. S.R. Goodman, S.S. Brenner, and J.R. Low, Jr.: Metall. Trans., 1973, vol. 4, pp. 2363–78.10.1007/BF02669376 ↗
10. N. Maruyama, M. Sugiyama, T. Hara, and H. Tamehiro: Mater. Trans. JIM, 1999, vol. 40, pp. 268–77.10.2320/matertrans1989.40.268 ↗
11. A. Deschamps, M. Militzer, and W.J. Poole: ISIJ Int., 2001, vol. 41, pp. 196–205.10.2355/isijinternational.41.196 ↗
12. R. Rana, W. Bleck, S.B. Singh, and O.N. Mohanty: Steel Res. Int., 2007, vol. 78, pp. 612–21.10.1002/srin.200706256 ↗
13. R. Rana, W. Bleck, S.B. Singh, and O.N. Mohanty: Steel Res. Int., 2007, vol. 78, pp. 622–30.10.1002/srin.200706257 ↗
14. R. Rana, W. Bleck, S.B. Singh, and O.N. Mohanty: Steel Res. Int., 2007, vol. 78, pp. 631–37.10.1002/srin.200706258 ↗
15. Vehicle Safety-ULSAB-AVC Crash Evaluations, ULSAB-AVC Consortium, Nov. 1999.
16. K. Kishida: Nippon Steel Tech. Rep., 1995, No. 64, pp. 33–35.
17. Y. Hosoya, M. Morita, K. Tahara, and O. Fukumoto: CAMP-ISIJ, 1992, vol. 5, pp. 1823–26.
18. IISI Committee Report: Recommended Practice for Dynamic Tensile Testing for Sheet Metals, 2004.
19. ESIS Committee Report: Proposed Standard Method for Dynamic Tensile Tests: ESIS TC5, 1997.
20. German Steel Association (VDEh) Report: Dynamic Tensile Testing Recommendation, 2004.
21. W.T. Lankford, S.C. Snyder, and J.A. Bauscher: Trans. ASM, 1950, vol. 42, pp. 1197–1225.
22. G.E. Dieter: in Mechanical Metallurgy, McGraw-Hill, London, 1988, vol. p. 287.
23. G.M. Worral, J.T. Buswell, C.A. English, M.G. Hetherington, and G.D.W. Smith: J. Nucl. Mater., 1987, vol. 148, pp. 107–14.10.1016/0022-3115(87)90525-3 ↗
24. W.J. Phythian, S. Dumbill, P. Brown, and R. Sinclair: Proc. 6th Int. Symp. on Environmental Degredation in Nuclear Power Systems–Water Reactors, R.E. Gold and E.P. Simonen, eds., TMS, San Diego, CA, 1993, pp. 729–37.
25. H.C. Rogers: Annu. Rev. Mater. Sci., 1979, vol. 9, pp. 283–311.10.1146/annurev.ms.09.080179.001435 ↗
26. W.-S. Lee and C.-F. Lin: Mater. Sci. Eng. A, 1998, vol. 241, pp. 48–59.10.1016/S0921-5093(97)00471-1 ↗
27. H. Conrad and S. Frederick: Acta Metall., 1962, vol. 10, pp. 1013–20.10.1016/0001-6160(62)90070-6 ↗
28. L. Meyer, W. Bleck, and W. Müschenborn: Proc. Int. Forum for Phys. Metall. of IF Steels, ISIJ and Nissoh Iwai Corp., Tokyo, 1994, pp. 203–22.
29. W. Bleck and I. Schael: Steel Res., 2000, vol. 71, pp. 173–78.10.1002/srin.200005709 ↗
30. W. Bleck, P. Larour, and A. Bäumer: Proc. 3rd Int. Conf. on Advanced Materials Processing (ICAMP-3), Institute of Materials Engineering, Australasia, Melbourne, 2004, pp. 21–29.
31. W.-S. Lee and C.-Y. Liu: Mater. Sci. Eng. A, 2006, vol. 426, pp. 101–13.10.1016/j.msea.2006.03.087 ↗
32. H. Conrad and H. Wiederisch: Acta Metall., 1960, vol. 8, pp. 128–30.10.1016/0001-6160(60)90097-3 ↗
33. L. Shi and D.O. Northwood: Acta Metall. Mater., 1995, vol. 43, pp. 453–60.10.1016/0956-7151(94)00279-Q ↗
34. J. Syarif, T. Tsuchiyama, and S. Takaki: ISIJ Int., 2003, vol. 43, pp. 1100–04.10.2355/isijinternational.43.1100 ↗
35. W. Jolley: Trans. AIME, 1968, vol. 242, pp. 306–14.
36. W.C. Leslie, R.J. Soeber, S.G. Babcock, and S.J. Green: Trans. ASM, 1969, vol. 62, pp. 690–710.
37. Y.T. Chen, D.G. Atteridge, and W.W. Gerberich: Acta Metall., 1981, vol. 29, pp. 1171–85.10.1016/0001-6160(81)90068-7 ↗
38. K. Okazaki: J. Mater. Sci., 1996, vol. 31, pp. 1087–99.10.1007/BF00352911 ↗