journal article·2003-10

Influence of oxygen on phase transformations in a Ti-48 At. pct Al alloy

Williams Lefebvre, Alain Menand, Annick Loiseau

Publisher page

Abstract

The composition and structure of Ti-48 at. pct Al alloys with various oxygen contents, quenched from a homogeneous α state, have been studied by means of one-dimensional atom-probe (1DAP) and transmission electron microscopy (TEM) analysis. Two regimes are observed. The change from one regime to the other depends on the global oxygen content. If the oxygen content is lower than 1.2 at. pct, the α→γ m massive transformation is involved during the quench. The alloys, hence, exhibit massive γ m-structure regions and regions having a two-phase (α 2+γ) ultrafine lamellar structure. Very thin α 2 plates, saturated with oxygen, are observed in γ m regions. The precipitation of these α 2 plates is promoted by excess oxygen in the γ m structure. Within ultra-fine lamellar-structure regions, oxygen is concentrated in α 2 lamellae (not saturated with oxygen) and is found to be responsible for the high volume fraction of α 2 phase. When the oxygen content is larger than 1.2 at. pct, the massive transformation is suppressed and the ultrafine lamellar structure is only observed in quenched samples. Analysis of the α → α 2 chemical ordering in the classical lamellar structure, formed within the (α+γ) dual-phase field, shows that high oxygen contents favor the chemical-ordering reaction of α phase at high temperatures (e.g., 1423 and 1523 K). It has, hence, been inferred that, above 1.2 at. pct O, the α → γ m massive transformation is suppressed and replaced by the α → α 2+y transformation paths.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. E. Abe, T. Kumagai, and N. Nakamura: Phil. Mag. Lett., 1995, vol. 72, pp. 291–96.10.1080/09500839508242466 ↗
2. A. Denquin and S. Naka: Acta Mater., 1996, vol. 44, pp. 353–65.10.1016/1359-6454(95)00168-6 ↗
3. G. Ramanath and V.K. Vasudevan: Mater. Res. Soc. Symp. Proc., 1993, vol. 288, pp. 223–28.10.1557/PROC-288-223 ↗
4. S.A. Jones and M.J. Kaufman: Acta Metall., 1993, vol. 41, pp. 387–98.10.1016/0956-7151(93)90069-5 ↗
5. Y. Yamabe, M. Takeyama, and M. Kikuchi: in Gamma Titanium Alumi-nides, Y.-W. Kim, R. Wagner, and M. Yamagushi, eds., The Minerals, Metals and Materials Society, San Diego, CA, 1995, p. 111.
6. K. Hono, E. Abe, T. Kumagai, and H. Harada: Scripta Metall., 1996, vol. 35, pp. 495–99.10.1016/1359-6462(96)00123-6 ↗
7. D. Veeraraghavan, P. Wang, and V.K. Vasudevan: Acta Mater., 1999, vol. 47, p. 313.10.1016/S1359-6454(99)00195-0 ↗
8. Y. Yamabe, M. Takeyama, and M. Kikuchi: Scripta Metall., 1994, vol. 30, p. 553.10.1016/0956-716X(94)90428-6 ↗
9. W. Lefebvre, A. Loiseau, M. Thomas, and A. Menand: Phil. Mag. A, vol. 82 (11), pp. 2341–55.10.1080/014186102760140595 ↗
10. X.D. Zhang, S. Godfrey, M. Weaver, M. Strangwood, P. Threadgills, M.J. Kaufman, and M.H. Loretto: Acta Mater., 1996, vol. 44, pp. 3723–34.10.1016/1359-6454(95)00453-X ↗
11. M.R. Plichta, J.H. Perepezko, H.I. Aaronson, and W.F. Lange: Acta Metall., 1980, vol. 28, pp. 1031–40.10.1016/0001-6160(80)90087-5 ↗
12. D. Veeraraghavan and V.K. Vasudevan: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warren- dale, PA, 1995, pp. 157–63.
13. D. Veeraraghavan, P. Wang, and V.K. Vasudevan: Acta Mater., 1999, vol. 47, pp. 3313–30.10.1016/S1359-6454(99)00195-0 ↗
14. T. Kumagai, E. Abe, and M. Nakamura: Metall. Mater. Trans. A, 1998, vol. 29A, p. 19.10.1007/s11661-998-0155-5 ↗
15. A. Ferrini, A. Denquin, C. Sanchez, D. Boivin, and J. L. Pouchou: Rapport Technique Intérieur No. RTI 7/1788 DMMP/N, November 1999.
16. K. Nakai, T. Momosaki, and Y. Ohmori: Mater. Trans. JIM, 2000, vol. 41, p. 406.10.2320/matertrans1989.41.406 ↗
17. M. Hillert: Metall. Trans., 1972, vol. 3, p. 2729.10.1007/BF02652840 ↗
18. T.B. Massalski: Metall. Trans. A, 1984, vol. 15A, p. 421.10.1007/BF02644965 ↗
19. J.H. Perepezko: Metall. Trans. A, 1984, vol. 15A, p. 437.10.1007/BF02644967 ↗
20. E. Abe, T. Kumagai, and N. Nakamura: Mater. Res. Soc. Symp. Proc., 1997, vol. 460, p. 201.10.1557/PROC-460-201 ↗
21. H.I. Aaronson, P. Wang, D.J. Michel, C.R. Feng, and V.K. Vasudevan: in Solid → Solid Phase Transformations, W.C. Johnson, J.M. Howe, and W.A. Soffa, eds., TMS, Warrendale, PA, 1994.
22. P. Wang and V.K. Vasudevan: Scripta Metall. Mater., 1992, vol. 27, p. 89.10.1016/0956-716X(92)90325-9 ↗
23. Q. Xia, J.N. Wang, J. Yang, and Y. Wang: Intermetallics, 2001, vol. 9, p. 361.10.1016/S0966-9795(01)00017-6 ↗
24. A. Menand, A. Huguet, and A. Nerac-Partaic: Acta Mater., 1996, vol. 44, pp. 4729–37.10.1016/S1359-6454(96)00111-5 ↗
25. J.M. Sarrau, F. Danoix, B. Deconihout, M. Bouet, A. Menand, and D. Blavette: Appl. Surf. Sci., 1993, vols. 76–77, pp. 367–73.
26. D.J. Larson and M.K. Miller: Mater. Sci. Eng., 1998, vol. A250, pp. 65–71.10.1016/S0921-5093(98)00537-1 ↗
27. Z.G. Liu, G. Frommeyer, and M. Kreuss: Scripta Metall. Mater., 1991, vol. 25, pp. 1205–10.10.1016/0956-716X(91)90529-A ↗
28. E. Abe and N. Nakamura: Phil. Mag. Lett., 1997, vol. 75, pp. 65–73.10.1080/095008397179769 ↗
29. E. Abe, S. Kajiwara, T. Kumagai, and N. Nakamura: Phil. Mag. A, 1997, vol. 75, pp. 975–91.10.1080/01418619708214005 ↗
30. P. Wang. and V.K. Vasudevan: Scripta Metall. Mater., 1992, vol. 27, pp. 89–94.10.1016/0956-716X(92)90325-9 ↗
31. P. Wang, G.B. Viswanathan, and V.K. Vasudevan: Metall. Trans. A, 1992, vol. 23A, pp. 690–97.10.1007/BF02801187 ↗
32. P. Wang, M. Kumar, D. Veeraraghavan, and V.K. Vasudevan: Acta Mater., 1998, vol. 46, pp. 13–30.10.1016/S1359-6454(97)00237-1 ↗
33. X.D. Zhang and M.H. Loretto: Phil. Mag. Lett., 1993, vol. 68, pp. 289–96.10.1080/09500839308242905 ↗
34. X.D. Zhang and M.H. Loretto: Phil. Mag. A, 1995, vol. 71, pp. 421–29.10.1080/01418619508244366 ↗
35. X.D. Zhang, Y.G. Li, M.J. Kaufman, and M.H. Loretto: Acta Mater., 1996, vol. 44, p. 3735.10.1016/1359-6454(95)00454-8 ↗
36. M.J. Blackburn: The Science, Technology and Applications of Titanium, R.I. Jaffee, and N.E. Promiser, eds., Pergamon Press, Oxford, UK, 1970, p. 633.10.1016/B978-0-08-006564-9.50071-3 ↗
37. T. Kumagai, E. Abe, M. Takeyam, and M. Nakamura: Scripta Mater., 199, vol. 36, pp. 523–29.10.1016/S1359-6462(96)00416-2 ↗
38. S. Zghal, S. Naka, and A. Couret: Acta Mater., 1997, vol. 45, pp. 3005–15.10.1016/S1359-6454(96)00398-9 ↗
39. C. McCullough, J.J. Valencia, C.G. Levi, and R. Mehrabian: Acta Metall., 1989, vol. 37, p. 1321.10.1016/0001-6160(89)90162-4 ↗
40. T.K. Roy, R. Balasubramaniam, and A. Ghosh: Scripta Metall., 1996, vol. 34, pp. 1425–30.10.1016/1359-6462(96)00005-X ↗
41. A. Nérac-Partaix: Ph.D. Thesis, Universitè de Rouen, Cedex, France, 1996.
42. G. Hug: Rapport Technique ONERA, Chátillon, France, 28/7228M, 1991.