The Influences of Carbon and Molybdenum on the Progress of Liquid Phase Sintering and the Microstructure of Boron-Containing Powder Metallurgy Steel
Source abstract
Abstract
Boron is an optimal alloying element for liquid phase sintering (LPS) of powder metallurgy (PM) Fe-based materials. However, the influences of various alloying elements on the progress of LPS are still undetermined. The aim of this study was to clarify the effects of carbon and molybdenum on the LPS and microstructure of boron-containing PM steel. The results showed that adding 0.5 wt pct C and 1.5 wt pct Mo, and particularly the former, promotes the LPS and increases the sintered density. With the addition of 0.5 wt pct C, liquid can be generated in two distinct regions, and the secondary liquid improves the densification. After 1523 K (1250 °C) sintering, the increases in sintered densities of Fe-0.4B, Fe-0.4B-1.5Mo, Fe-0.4B-0.5C, and Fe-0.4B-1.5Mo-0.5C steels were 0.33, 0.47, 0.56, and 0.64 g/cm3, respectively. Thermodynamic simulation also demonstrated that the increases in sintered densities were correlated with the liquid volumes formed at 1523 K (1250 °C). In conclusion, adding 0.5 wt pct C to B-containing PM steels facilitates the formation of a secondary liquid phase and higher liquid volume, resulting in better densification.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. M. Campos, J. Sicre-Artalejo, J. J. Munoz, and J. M. Torralba: Metall. Mater. Trans. A, 2010, vol. 41, pp. 1847-54.10.1007/s11661-010-0212-8 ↗
2. M. Gauthier, S. Metcalfe, S. Pelletier, and T. F. Stephenson: Powder Metall., 2011, vol. 54, pp. 628-35.10.1179/1743290110Y.0000000009 ↗
3. K. S. Moghaddam and N. Solimanjad: Powder Metall., 2013, vol. 56, pp. 245-50.10.1179/1743290112Y.0000000050 ↗
4. F. Bernier, P. Plamondon, J. P. Baïlon, and G. L’Espèrance: Powder Metall., 2011, vol. 54, pp. 559-65.10.1179/1743290111Y.0000000006 ↗
5. M. W. Wu, K. S. Hwang, and H. S. Huang: Metall. Mater. Trans. A, 2007, vol. 38, pp. 1598-1607.10.1007/s11661-007-9201-y ↗
6. M. W. Wu, L. C. Tsao, G. J. Shu, and B. H. Lin: Mater. Sci. Eng. A, 2012, vol. 538, pp. 135-44.10.1016/j.msea.2011.12.113 ↗
7. M. W. Wu, G. J. Shu, S. Y. Chang, and B. H. Lin: Metall. Mater. Trans. A, 2014, vol. 45, pp. 3866-75.10.1007/s11661-014-2356-4 ↗
8. J. M. Torralba, A. Navarro, and M. Campos: Mater. Sci. Eng. A, 2013, vol. 573, pp. 253-56.10.1016/j.msea.2013.02.034 ↗
9. R. Oro, M. Campos, J. M. Torralba, and C. Capdevila: Powder Metall., 2012, vol. 55, pp. 294-301.10.1179/1743290112Y.0000000016 ↗
10. B. A. Gething, D. F. Heaney, D. A. Koss, and T. J. Mueller: Mater. Sci. Eng. A, 2005, vol. 390, pp. 19-26.10.1016/j.msea.2004.05.087 ↗
11. H. Danninger, C. Xu, G. Khatibi, B. Weiss, and B. Lindqvist: Powder Metall., 2012, vol. 55, pp. 378-87.10.1179/1743290112Y.0000000001 ↗
12. X. Denga, G. Piotrowski, N. Chawla, and K.S. Narasimhan: Mater. Sci. Eng. A, 2008, vol. 491, pp. 19-27.10.1016/j.msea.2008.05.009 ↗
13. T. M. Puscas, M. Signorini, A. Molinari, and G. Straffelini: Mater. Charact., 2003, vol. 50, pp. 1-10.10.1016/S1044-5803(01)00186-3 ↗
14. R. M. German, K. S. Hwang, and D. S. Madan: Powder Metall. Int., 1987, vol. 19, pp. 15-18.
15. E. Dudrová, M. Selecká, R. Bureś, and M. Kabátová: ISIJ Int., 1997, vol. 37, pp. 59-64.10.2355/isijinternational.37.59 ↗
16. M. Selecká, A. Šalak, and H. Danninger: J. Mater. Process. Technol., 2003, vol. 143-144, pp. 910-915.10.1016/j.jmatprotec.2003.10.001 ↗
17. M. Sarasola, T. G. Acebo, and F. Castro: Acta Mater., 2004, vol. 52, pp. 4615-22.10.1016/j.actamat.2004.06.018 ↗
18. M. Sarasola, T. G. Acebo, and F. Castro: Powder Metall., 2005, vol. 48, pp. 59-67.10.1179/003258905X37558 ↗
19. A. Molinari, T. Pieczonka, J. Kazior, S. Gialanella, and G. Straffelini: Metall. Mater. Trans. A, 2000, vol. 31, pp. 1497-1506.10.1007/s11661-000-0160-9 ↗
20. J. K. Baczewska and M. Rosso: Powder Metall. Prog., 2006, vol. 6, pp. 11-19.
21. M. Momeni, C. Gierl, H. Danninger, and A. Avakemian: Powder Metall., 2012, vol. 55, pp. 54-64.10.1179/1743290111Y.0000000020 ↗
22. J. Liu, A. Cardamone, T. Potter, R. M. German, and F. J. Semel: Powder Metall., 2000, vol. 43, pp. 57-61.10.1179/pom.2000.43.1.57 ↗
23. Z. Xiu, A. Salwen, X. Qin, F. He, and X. Sun: Powder Metall., 2003, vol. 46, pp. 171-74.10.1179/003258903225005411 ↗
24. H. Ö. Gulsoy: Scripta Mater., 2005, vol. 52, pp. 187-92.10.1016/j.scriptamat.2004.09.032 ↗
25. T.B. Sercombe: Mater. Sci. Eng. A, 2003, vol. 363, pp. 242-52.10.1016/S0921-5093(03)00645-2 ↗
26. T. B. Sercombe and G. B. Schaffer: Mater. Sci. Eng. A, 2010, vol. 528, pp. 751-55.10.1016/j.msea.2010.09.066 ↗
27. G. Cui and Z. Kou: J. Alloys Compd., 2014, vol. 586, pp. 699-702.10.1016/j.jallcom.2013.10.110 ↗
28. R. L. Lawcock and T. J. Davies: Powder Metall., 1990, vol. 33, pp. 147-50.10.1179/pom.1990.33.2.147 ↗
29. C. T. Huang and K. S. Hwang: Powder Metall., 1996, vol. 39, pp. 119-23.10.1179/pom.1996.39.2.119 ↗
30. A. Molinari, G. Straffelini, V. Fontanari, and R. Canteri: Powder Metall., 1992, vol. 35, pp. 285-91.10.1179/pom.1992.35.4.285 ↗
31. G. Straffelini, V. Fontanari, A. Molinari, and B. Tesi: Powder Metall., 1993, vol. 36, pp. 135-41.10.1179/pom.1993.36.2.135 ↗
32. K. Zhu, C. Oberbillig, C. Musik, D. Loison, T. Iung: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4222-31.10.1016/j.msea.2011.02.022 ↗
33. B. Hwang, D. W. Suh, and S. J. Kim: Scripta Mater., 2011, vol. 64, pp. 1118-20.10.1016/j.scriptamat.2011.03.003 ↗