journal article·2012-12

Effect of Specific Energy Input on Microstructure and Mechanical Properties of Nickel-Base Intermetallic Alloy Deposited by Laser Cladding

Reena Awasthi, Santosh Kumar, Kamlesh Chandra, B. Vishwanadh, R. Kishore, C. S. Viswanadham, D. Srivastava, G. K. Dey

Publisher page

Abstract

This article describes the microstructural features and mechanical properties of nickel-base intermetallic alloy laser-clad layers on stainless steel-316 L substrate, with specific attention on the effect of laser-specific energy input (defined as the energy required per unit of the clad mass, kJ/g) on the microstructure and properties of the clad layer, keeping the other laser-cladding parameters same. Defect-free clad layers were observed, in which various solidified zones could be distinguished: planar crystallization near the substrate/clad interface, followed by cellular and dendritic morphology towards the surface of the clad layer. The clad layers were characterized by the presence of a hard molybdenum-rich hexagonal close-packed (hcp) intermetallic Laves phase dispersed in a relatively softer face-centered cubic (fcc) gamma solid solution or a fine lamellar eutectic phase mixture of an intermetallic Laves phase and gamma solid solution. The microstructure and properties of the clad layers showed a strong correlation with the laser-specific energy input. As the specific energy input increased, the dilution of the clad layer increased and the microstructure changed from a hypereutectic structure (with a compact dispersion of characteristic primary hard intermetallic Laves phase in eutectic phase mixture) to near eutectic or hypoeutectic structure (with reduced fraction of primary hard intermetallic Laves phase) with a corresponding decrease in the clad layer hardness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. S. Atamert and H.K.D.H. Bhadeshia: Metall. Trans. A, 1989, vol. 20A, pp. 1037–53.10.1007/BF02650140 ↗
2. A. Frenk and W. Kurz: Mater. Sci. Eng. A, 1993, vol. 173, pp. 339–42.10.1016/0921-5093(93)90240-F ↗
3. A. Tiziani, L. Giordano, P. Matteazzi, and B. Badan: Mater. Sci. Eng., 1987, vol. 88, pp. 171–75.10.1016/0025-5416(87)90082-6 ↗
4. A.F.M. Arif and B.S. Yilbas: J. Mater. Eng. Perform., 2008, vol. 17, pp. 644–50.10.1007/s11665-008-9204-x ↗
5. Z. Liu, J. Cabrero, S. Niang, and Z.Y. Al-Taha: Surf. Coat. Technol., 2007, vol. 201, pp. 7149–58.10.1016/j.surfcoat.2007.01.032 ↗
6. C. Navas, R. Vijande, J.M. Cuetos, M.R. Fernández, and J. de Damborenea: Surf. Coat. Technol., 2006, vol. 201, pp. 776–85.10.1016/j.surfcoat.2005.12.032 ↗
7. R.D. Schmidt and D.P. Ferriss: Wear, 1975, vol. 32, pp. 279–89.10.1016/0043-1648(75)90316-6 ↗
8. J.R. Devis: Nickel, Cobalt and Their Alloys, ASM International, Materials Park, OH, 2000.
9. A. Halstead and R.D. Rawlings: Met. Sci., 1984, vol. 18, pp. 491–500.10.1179/030634584790253146 ↗
10. S.E. Mason and R.D. Rawlings: Mater. Sci. Tech., 1989, vol. 5, pp. 180–85.10.1179/026708389792209602 ↗
11. M.J. Tobar, J.M. Amado, C. Alvarej, A. Gracia, A. Valera, and A. Yanez: Surf. Coat. Technol., 2008, vol. 202, pp. 2297–2301.10.1016/j.surfcoat.2007.11.025 ↗
12. G. Sauthoff: Intermetallics, Wiley VCH, Weinheim, Germany, 1995.10.1002/9783527615414 ↗
13. C.T. Liu, J.H. Zhu, M.P. Brady, C.G. McKamey, and L.M. Pike: Intermetallics, 2000, vol. 8, pp. 1119–29.10.1016/S0966-9795(00)00109-6 ↗
14. Z.A. Foroulis: Wear, 1984, vol. 96, pp. 203–18.10.1016/0043-1648(84)90094-2 ↗
15. T.A. Wolfla and R.C. Tucker: Thin Solid Films, 1978, vol. 53, pp. 353–64.10.1016/0040-6090(78)90228-6 ↗
16. C. Navas, M. Cadenas, J.M. Cuetos, and J. de Damborenea: Wear, 2006, vol. 260, pp. 838–46.10.1016/j.wear.2005.04.020 ↗
17. J. Przybylowicz and J. Kusinski: Surf. Coat. Technol., 2000, vol. 125, pp. 13–18.10.1016/S0257-8972(99)00563-0 ↗
18. W.C. Lin and C. Chen: Surf. Coat. Technol., 2006, vol. 200, pp. 4557–63.10.1016/j.surfcoat.2005.03.033 ↗
19. M.O. Price, T.A. Wolfla, and R.C. Tucker: Thin Solid Films, 1977, vol. 45, pp. 309–19.10.1016/0040-6090(77)90264-4 ↗
20. G. Xiao-Xi and H. Zhang: Thermal Spray: International Advances in Coatings Technology, ASM International, Materials Park, OH, 1992, pp. 729–34.
21. G. Bolelli and L. Lusvarghi: J. Thermal Spray Technol., 2006, vol. 15, pp. 802–10.10.1361/105996306X146721 ↗
22. J. Vikstrom: Wear, 1994, vol. 179, pp. 143–46.10.1016/0043-1648(94)90232-1 ↗
23. E.K. Ohriner, T. Wada, E.P. Wehlan, and H. Ocken: Metall. Trans. A, 1991, vol. 22A, pp. 983–91.10.1007/BF02661091 ↗
24. R.N. Johnson and D.G. Farwick: Thin Solid Films, 1978, vol. 53, pp. 365–73.10.1016/0040-6090(78)90229-8 ↗
25. J.J. Demo, Jr.: U.S. Patent, to Donald Platt Ferriss: E.I. du Pont de Nemours and Company, Wilmington, DE, Patent No. 3,839,024, 1974.
26. G. Bolelli, V. Cannillo, L. Lusvarghi, M. Montorsi, F.P. Mantini, and M. Barletta: Wear, 2007, vol. 263, pp. 1397–1416.10.1016/j.wear.2006.12.002 ↗
27. G. Bolelli, L. Lusvarghi. and R. Giovanardi: Surf. Coat. Technol., 2008, vol. 202, pp. 4793–4809.10.1016/j.surfcoat.2008.04.056 ↗
28. R. Awsathi, S. Kumar, D. Srivastava, and G.K. Dey: Pramana- J. Phys., 2010, vol. 75, pp. 1259–66.10.1007/s12043-010-0215-4 ↗
29. K.C. Antony, K.J. Bhansali, R.W. Messler, A.F. Miller, M.O. Price, and R.C. Tucker: Metals Handbook, vol. 6, ASM, Materials Park, OH, 1983, pp. 771–93.
30. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, p. 1564.10.1557/JMR.1992.1564 ↗
31. W. Kurz and R. Trivedi: Mater. Sci. Eng. A, 1994, vol. 179, pp. 46–51.10.1016/0921-5093(94)90162-7 ↗
32. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans. Tech. Publication, Aedermansdorf, Switzerland, 1986.
33. D.I. Bardos, K.P. Gupta, and P.A. Beck: Trans. TMS-AIME, 1961, vol. 221, pp. 1087–88.
34. E.I. Gladyshevskii and Y.B. Kuzma: Zh. Strukt. Khim., 1960, vol. 1, p. 66.
35. R.C. Mittal, S.K. Si, and K.P. Gupta: J. Less Common Met., 1978, vol. 60, pp. 75–82.10.1016/0022-5088(78)90091-7 ↗
36. K.P. Gupta: J. Phase Equil. Diff., 2005, vol. 4, p. 26.
37. S.E. Mason and R.D. Rawlings: Mater. Sci. Tech., 1994, vol. 10, pp. 924–28.10.1179/mst.1994.10.10.924 ↗
38. J.R. Davis: ASM Handbook, vol. 6, ASM, Materials Park, OH, 1992, pp. 861–72.
39. W. Bruckner, K. Kleinstuck, and G.E.R. Schulze: Phys. Status Solidi, 1967, vol. 23, p. 465.10.1002/pssb.19670230206 ↗
40. P.M. Hazzledine and P. Pirouz: Scripta Metall. Mater., 1993, vol. 28, p. 277.10.1016/0956-716X(93)90468-8 ↗