Changes in Precipitate Distributions and the Microstructural Evolution of P24/P91 Dissimilar Metal Welds During PWHT
Source abstract
Abstract
The effect of post-weld heat treatments (PWHTs) on the evolution of precipitate phases in dissimilar metal welds made between 9 pct Cr P91 alloy and 2.25 pct Cr T/P24-type weld metal has been investigated. Sections of multi-pass fusion welds were analyzed in their as welded condition and after PWHTs of 2 and 8 hour duration at 1003 K (730 °C). Thin foil specimens and carbon extraction replicas have been examined in transmission electron microscopes in order to identify precipitate phases and substantiate their distributions in close proximity to the fusion line. The findings of these studies confirm that a carbon-depleted region develops in the lower alloyed weld material, adjacent to the weld interface, during thermal processing. A corresponding carbon enriched region is formed, simultaneously, in the coarse grain heat affected zone of the P91 parent alloy. It has been demonstrated that carbon depletion from the weld alloy results in the dissolution of M7C3 and M23C6 chromium carbides. However, micro-alloying additions of vanadium and niobium which are made to both the P24 and P91 alloys facilitate the precipitation of stable, nano-scale, MX carbonitride particles. This work demonstrates that these particles, which are of key importance to the strength of ferritic creep resistant alloys, are retained in carbon-depleted regions. The microstructural stability which is conferred by their retention means that the pernicious effects of recrystallization are largely avoided.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. K. Maruyama, K. Sawada and J. I. Koike: ISIJ International, 2001, vol. 41, pp. 641–53.10.2355/isijinternational.41.641 ↗
2. V. Foldyna and J. Purmenský: Czechoslovak Journal of Physics, 1989, vol. 39, pp. 1133–37.10.1007/BF01605397 ↗
3. W. Bendick, J. Gabrel, B. Hahn and B. Vandenberghe (2007) Int. J. Press. Vessel. Pip. 84:13–20.10.1016/j.ijpvp.2006.09.002 ↗
4. K. Asakura, Y. Yamashita, T. Yamada and K. Shibata: ISIJ International, 1990, vol. 30, pp. 937–46.10.2355/isijinternational.30.937 ↗
5. H. K. D. H. Bhadeshia: ISIJ International, 2001, vol. 41, pp. 626–40.10.2355/isijinternational.41.626 ↗
6. R. Jayaram and R. L. Klueh (1998) Metall. Mater. Trans. A 29A:1551–58.10.1007/s11661-998-0077-2 ↗
7. C.D. Lundin (1982) Weld. J. 61:58s–63s.
8. R. J. Christoffel and R. M. Curran: Weld. J., 1956, vol. 35, pp. 457s - 468s.
9. L. S. Livshits: Met Sci Heat Treat, 1959, vol. 1, pp. 15–18.10.1007/BF00819483 ↗
10. L. S. Darken: Trans. AIME, 1948, vol. 180, pp. 430–38.
11. C. Sudha, R. Anand, S. Saroja and M. Vijayalakshmi (2010) Trans. Indian Inst. Met. 63:739–44.10.1007/s12666-010-0113-y ↗
12. J.M. Race: Thesis, Department of Materials Science and Metallurgy, University of Cambridge, 1992, p. 178.
13. C. Sudha, A. L. E. Terrance, S. K. Albert and M. Vijayalakshmi: Journal of Nuclear Materials, 2002, vol. 302, pp. 193–205.10.1016/S0022-3115(02)00777-8 ↗
14. R. Anand, C. Sudha, T. Karthikeyan, A. L. E. Terrance, S. Saroja and M. Vijayalakshmi: Journal of Materials Science, 2009, vol. 44, pp. 257–65.10.1007/s10853-008-3052-9 ↗
15. H. Heuser, C. Jochum, W. Bendick and B. Hahn: Weld. World, 2008, vol. 52, pp. 217–23.
16. C.D. Lundin, K.K. Khan, and D. Yang: Weld. Res. Counc. Bull., 1995, pp. 1–49.
17. P. Seliger and A. Thomas: 5th International Conference on Mechanics and Materials in Design, 2006, Chapter IV: Welds at High Temperature (WELDON) in Design, 2006, pp. 1–9.
18. D. Gandy and K. Coleman: Performance Review of T/P91 Steels, EPRI, Palo Alto, CA, 1004516, 2002.
19. R. Fuchs, H. Heuser and B. Hahn: Materials at High Temperatures, 2010, vol. 27, pp. 183–90.10.3184/096034010X12813771363483 ↗
20. V. Vodarek, L. Strilkova, and Z. Kubon: Metal 2009, Conference Proceedings, 2009, pp. 129–35.
21. Z. Yao, S. Xu, M. L. Jenkins and M. A. Kirk: Journal of Electron Microscopy, 2008, vol. 57, pp. 91–94.10.1093/jmicro/dfn004 ↗
22. D. R. G. Mitchell and S. Sulaiman: Materials Characterization, 2006, vol. 56, pp. 49–58.10.1016/j.matchar.2005.09.004 ↗
23. S. Morito, J. Nishikawa and T. Maki (2003) ISIJ Int. 43:1475–77.10.2355/isijinternational.43.1475 ↗
24. H. K. D. H. Bhadeshia: Bainite in Steels. second ed. IOM Communications Ltd., London, 2002.
25. S. Takebayashi, T. Kunieda, N. Yoshinaga, K. Ushioda and S. Ogata: ISIJ International, 2010, vol. 50, pp. 875–82.10.2355/isijinternational.50.875 ↗
26. K. Dawson and G. J. Tatlock: Materials at High Temperatures, 2011, vol. 28, pp. 259–63.10.3184/096034011X13182565389960 ↗
27. T. Thomas and M. J. Goringe (1981) Transmission Electron Microscopy of Materials. Wiley & Sons, New York, p. 91.
28. Y. A. Bagaryatski: Dokl. Akad. Nauk. SSSR, 1950, vol. 73, p. 1161.
29. D. N. Shackleton and P. M. Kelly: Acta Metallurgica, 1967, vol. 15, pp. 979–92.10.1016/0001-6160(67)90263-5 ↗
30. F. Abe: Materials Science and Engineering: A, 2004, vol. 387–389, pp. 565–69.10.1016/j.msea.2004.01.057 ↗
31. P.J. Ennis and A. Czyrska-Filemonowicz: Sadhana—Academy Proceedings in Engineering Sciences, 2003, vol. 28, pp. 709–30.10.1007/BF02706455 ↗
32. A. Zielińska-Lipiec, A. Czyrska-Filemonowicz, P. J. Ennis and O. Wachter: Journal of Materials Processing Technology, 1997, vol. 64, pp. 397–405.10.1016/S0924-0136(96)02591-5 ↗
33. F. Abe: Sci. Technol. Adv. Mater., 2008, vol. 9, Article No. 013002.
34. K. Miyata, T. Omura, T. Kushida and Y. Komizo (2003) Metall. Mater. Trans. A 34A: 1565–73.10.1007/s11661-003-0303-x ↗
35. R. Anand, C. Sudha, V. Thomas Paul, S. Saroja and M. Vijayalakshmi (2010) Weld. J. 89:65s-74s.
36. J. Askill (1970) Tracer Diffusion Data for Metals, Alloys, and Simple Oxides. Plenum Press, New York.10.1007/978-1-4684-6075-9 ↗