Rising Displacement Stress Corrosion Cracking Testing
Source abstract
Abstract
Fracture-mechanics-based test and evaluation techniques provide insight into the phenomenon of stress corrosion cracking (SCC) and help to develop guidance for avoiding or controlling SCC. In addition to constant load and constant deflection tests, techniques that are based on rising load or rising displacement procedures are applied increasingly in fracture mechanics SCC testing. Rising displacement tests on precracked specimens were used for studying hydrogen embrittlement (HE) and to serve as a basis for modeling material degradation caused by the uptake of atomic hydrogen from the environment. The measurements of the crack-tip opening angle and of the crack-tip opening displacement combined with crack growth velocity data served to rationalize the experimental findings by comparison with the results of simulations of HE using various models.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. W. Dietzel and A. Turnbull: Comprehensive Structural Integrity, Addendum: Mechanical Characterization of Materials, Ed. K.-H. Schwalbe, Elsevier, Oxford, UK, 2007, pp. 43–74.10.1016/B978-008043749-1/00325-5 ↗
2. W. Dietzel: Report GKSS 91/E/27, GKSS-Forschungszentrum Geesthacht GmbH, Geesthacht, Germany, 1991.
3. W. Dietzel, Report GKSS 99/E/24, GKSS-Forschungszentrum Geesthacht GmbH, Geesthacht, Germany, 1999.
4. J.G. Kaufmann: Corrosion, 1979, vol. 35, p. i.10.5006/0010-9312-35.4.i ↗
5. D.R. Anderson and J.P. Gudas: Environment Sensitive Fracture, Evaluation and Comparison of Tests Methods, Eds. S.W. Dean, E.N. Pugh, and G.M. Ugiansky, ASTM, West Conshohocken, PA, 1984, pp. 98–113.10.1520/STP34429S ↗
6. G. Abramson, J.T. Evans, and R.N. Parkins: Metall. Trans., 1985, vol. 16A, pp. 101–08.10.1007/BF02656717 ↗
7. W. Dietzel, K.-H. Schwalbe, and D. Wu: Fatigue Fract. Eng. Mater., 1989, vol. 12, no. 6, pp. 495–510.10.1111/j.1460-2695.1989.tb00559.x ↗
8. W. Dietzel and K.-H. Schwalbe: Hydrogen Effects on Material Behaviour, Eds. N.R. Moody and A.W. Thompson, The Minerals, Metals & Materials Society, Warrendale, PA, 1990, pp. 975–83.
9. K.-H. Schwalbe: Fracture Mechanics—26th Volume, Eds. W.G. Reuter, J.H. Underwood, and J.C. Newman, ASTM, West Conshohocken, PA, 1995, pp. 763–78.10.1520/STP16416S ↗
10. W. Dietzel and M. Pfuff: The Effects of Hydrogen on Material Behavior, Eds. N.R. Moody and A.W. Thompson, The Minerals, Metals & Materials Society, Warrendale, PA, 1996, pp. 303–11.
11. W. Dietzel, M. Pfuff, and G.G. Juilfs: Mater. Sci. Forum, 2005, vol. 482, pp. 11–16.10.4028/www.scientific.net/MSF.482.11 ↗
12. J.R. Rice, W.J. Drugan, and T.L. Sham: Fracture Mechanics—Twelfth Conf., ASTM, West Conshohocken, PA, 1980, pp. 189–221.10.1520/STP36972S ↗
13. W. Dietzel: Mater. Sci., 2004, vol. 40, no. 6, pp. 749–55.10.1007/s11003-005-0111-0 ↗
14. H. Vehoff and H.-K. Klameth: Acta Metall., 1985, vol. 33, no. 6, pp. 955–66.10.1016/0001-6160(85)90189-0 ↗
15. A.H.M. Krom, R.W.J. Koers, and A. Bakker: J. Mech. Phys. Solids, 1999, vol. 47, pp. 971–92.10.1016/S0022-5096(98)00064-7 ↗
16. W. Dietzel, M. Pfuff, and G.G. Juilfs: Proc. 2nd Int. Conf. on Environmental Degradation of Engineering Materials, EDEM′2003, Bordeaux, France, 2003.
17. I. Scheider: First M.I.T. Conf. on Comp. Fluid and Solid Mech., Elsevier, Amsterdam, The Netherlands, 2001, pp. 460–62.10.1016/B978-008043944-0/50681-8 ↗
18. I. Scheider, M. Pfuff, and W. Dietzel: Eng. Fract. Mech., 2008, vol. 75, no. 15, pp. 4283–91.10.1016/j.engfracmech.2007.10.002 ↗
19. R. Falkenberg, W. Brocks, W. Dietzel, and I. Scheider: Key Eng. Mater., 2010, vols. 417–418, pp. 329–32.
20. R. Falkenberg: Ph.D. Thesis, Christian-Albrechts-Universität zu Kiel, Germany, 2010.
21. B.W. Rosen: AIAA J., 1964, vol. 2, pp. 1911–85.10.2514/3.2699 ↗
22. S.L. Phoenix and H.M. Taylor: Adv. Appl. Prob., 1973, vol. 5, pp. 200–16.10.2307/1426033 ↗
23. M. Pfuff and W. Dietzel: Proc. 11th Int. Conf. on Fracture, ICF11, Turin, Italy, 2005, pp. 3727–31.
24. N. Winzer, A. Atrens, G. Song, E. Ghali, W. Dietzel, K.U. Kainer, N. Hort, and C. Blawert: Adv. Eng. Mater., 2005, vol. 8, pp. 659–93.10.1002/adem.200500071 ↗
25. A. Atrens and W. Dietzel: Adv. Eng. Mater., 2007, vol. 9, pp. 292–97.10.1002/adem.200600275 ↗
26. N. Winzer, A. Atrens, W. Dietzel, and K.U. Kainer: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1157–73.10.1007/s11661-008-9475-8 ↗
27. A. Atrens, N. Winzer, G. Song, W. Dietzel, and C. Blawert: Adv. Eng. Mater., 2006, vol. 8, pp. 749–51.10.1002/adem.200600050 ↗