Nanostructure Particle-Reinforced Transient Liquid Phase Diffusion Bonding: a Comparative Study
Source abstract
Abstract
Particle-reinforced aluminum–metal matrix composites (Al-MMCs) are used in many engineering applications, because they provide significant advantages when compared to monolithic aluminum alloys. However, there still exists the need to identify a suitable joining process for these materials, which minimizes particulate disruption and retains the strength of the MMC within the joint region. This study presents a comparison between joint qualities achieved when a monolithic interlayer is used vs when a nanoparticle-reinforced composite interlayer is used during transient liquid phase diffusion bonding of Al-6061 alloy containing 15 vol pct of Al2O3 particles. Examination of the joint region using scanning electron microscopy (SEM), wavelength dispersive spectroscopy (WDS), and X-ray diffraction (XRD) showed the formation of eutectic phases such as Al3Ni, Al9FeNi, and Ni3Si within the joint zone. The results indicate that the addition of nanoparticle reinforcements into the interlayer can be used to improve joint strength and minimize particle segregation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. T. Kumar: J. Mater. Manufact. Process., 2005, vol. 20, pp. 717–26.10.1081/AMP-200055116 ↗
2. J.H. Devletian: Weld. J., 1987, vol. 66, pp. 33–39.
3. S. Wang, H. Zhou, and Y. Kang: J. Alloys Compd., 2003, vol. 352, pp. 79–83.10.1016/S0925-8388(02)01117-9 ↗
4. A. Urena, M.D. Escalera, and L. Gil: Sci. Technol., 2000, vol. 60, pp. 613–22.
5. R. García, V.H. López, A.R. Kennedy, and G. Arias: J. Mater. Sci., 2007, vol. 42, pp. 7794–7800.10.1007/s10853-007-1632-8 ↗
6. L. Yu-cheng, Y. Wei-jin, C. Xi-zhang, Z. Fei, and C. Xiao-nong: Trans. Nonferrous Met. Soc. China, 2007, vol. 17, pp. 313–17.10.1016/S1003-6326(07)60091-0 ↗
7. L. Liu, J. Tan, and X. Liu: Mater. Lett., 2007, vol. 61, pp. 2373–77.10.1016/j.matlet.2006.09.016 ↗
8. J. Zou, Q. Zhao, and Z. Chen: J. Light Alloy Fabric. Technol., 2004 (3), pp. 48–52.
9. X.P. Zhang, G.F. Quan, and W. Wei: Compos. Part A, 1999, vol. 30, pp. 823–27.10.1016/S1359-835X(98)00186-9 ↗
10. W.P. Weng and T.H. Chuang: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2673–82.10.1007/s11661-997-0024-7 ↗
11. M.B.D Ellis: TWI J., 1997, vol. 6, pp. 69–128.
12. W.D. MacDonald and T.W. Eager: Proceedings of TMS symposium on the metal science of joining, 1991, pp. 93–101.
13. I. Tuah-Poku, M. Dollar, and T.B. Massalski: Metall. Trans. A, 1988, vol. 19A, pp. 675–86.10.1007/BF02649282 ↗
14. Y. Zhou, W.F. Gale, and T.H. North: Int. Mater. Rev., 1995, vol. 40 (5), pp. 181–96.10.1179/imr.1995.40.5.181 ↗
15. ASTM E3-01, Standard Preparation for Metallographic Specimen, ASTM International, 2008, www.astm.org.
16. Z. Li, Y. Zhou, and T.H. North: Mater. Sci., 1995, vol. 30, pp. 1075–82.10.1007/BF01178448 ↗
17. A.A. Shirzadi and E.R. Wallach: Mater. Sci. Technol., 1997, vol. 13, pp. 135–42.10.1179/mst.1997.13.2.135 ↗
18. G. Zhang, J. Zhang, Y. Pei, S. Li, and D. Chai: Mater. Sci. Eng. A, 2008, vol. 488 (1–2), pp. 146–56.10.1016/j.msea.2007.11.084 ↗
19. J. Huang, Y. Dong, J. Zhang, Y. Wan, and G. Zhou: J. Mater. Sci. Technol., 2005, vol. 21 (5).10.1179/174328405X51631 ↗
20. J. Yan, Z. Xu, L. Shi, X. Ma, and S. Yang: Mater. Des., 2011, vol. 32, pp. 343–47.10.1016/j.matdes.2010.06.036 ↗
21. J.K. Dennis and T.E. Such: Nickel and Chromium Plating, 3rd ed., Woodhead Publishing and ASM International, 1993.10.1533/9781845698638 ↗
22. C.W. Sinclair, G.R. Purdy, and J.E. Morral: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1187–92.10.1007/s11661-000-0114-2 ↗
23. Y. Zhai, T.H. North, and J. Serrato-Rodrigues: J. Mater. Sci., 1997, vol. 32, pp. 1393–97.10.1023/A:1018529228375 ↗
24. D.M. Stefanescu, F.R. Juretzko, B.K. Dhindaw, A. Catalina, S. Sen, and P.A. Curreri: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1697–1706.10.1007/s11661-998-0092-3 ↗
25. S. Mukherjee and D.M. Stefanescu: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 613–21.10.1007/s11661-004-0373-4 ↗