Interdiffusion structures and paths for multiphase Fe-Ni-Al diffusion couples at 1000 °C
Source abstract
Abstract
Diffusion studies were carried out in the Fe-Ni-Al system at 1000 °C using solid-solid diffusion couples assembled with β (B2), γ (fcc) single phase, and (β + γ) two-phase alloys. The diffusion couples were encapsulated in quartz tubes under vacuum and annealed for 48 hours. The diffusion structures were examined by optical and scanning electron microscopy. For all β vs (β + γ) couples, growth of the β phase was observed as the (β + γ) two-phase region recessed with the dissolution of the γ phase. For multiphase couples assembled with two (β + γ) terminal alloys, demixing of the (β + γ) two-phase alloys occurred with the formation of single-phase β and γ layers. The development of an interphase boundary between the (β + β′) two-phase region and the γ phase is reported for the first time for a Fe-Ni-Al diffusion couple assembled with single-phase, β, and γ terminal alloys. Various diffusion structures for the couples were related to their diffusion paths constructed from concentration profiles determined by electron probe microanalysis. Interdiffusion fluxes of individual components were determined directly from the experimental concentration profiles and examined in light of diffusional interactions and the development of zero-flux planes and flux reversals. In addition, the boundaries for the miscibility gap between the ordered β and disordered β′ phases of the Fe-Ni-Al system at 1000 °C were determined with the aid of diffusion couples that developed β and β′ phases in the diffusion zone.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. J.S. Kirkaldy and D.J. Young: Diffusion in the Condensed State, Institute of Metals, London, 1987.
2. F.J.J. van Loo: Prog. Solid State Chem., 1990, vol. 20, pp. 47–99.10.1016/0079-6786(90)90007-3 ↗
3. M.A. Dayananda: Def. Diff. Forum, 1992, vol. 83, pp. 73–86.10.4028/www.scientific.net/DDF.83.73 ↗
4. J.B. Clark and F.N. Rhines: Trans. ASM, 1959, vol. 51, pp. 199–221.
5. J.S. Kirkaldy and D.G. Fedak: Trans. TMS-AIME, 1962, vol. 224, pp. 490–94.
6. J.S. Kirkaldy and L.C. Brown: Can. Metall. Q., 1963, vol. 2, pp. 89–117.10.1179/cmq.1963.2.1.89 ↗
7. A.G. Guy, H. Fechtig, and R.H. Buck: Trans. TMS-AIME, 1965, vol. 233, pp. 1178–79.
8. C.W. Talyor, Jr., M.A. Dayananda, and R.E. Grace: Metall. Trans., 1970, vol. 1, pp. 127–31.10.1007/BF02819251 ↗
9. D.E. Coates and J.S. Kirkaldy: Metall. Trans., 1971, vol. 2, pp. 3467–77.10.1007/BF02811629 ↗
10. R.D. Sisson, Jr. and M.A. Dayananda: Metall. Trans., 1972, vol. 3, pp. 647–52.10.1007/BF02642746 ↗
11. L.E. Wirtz and M.A. Dayananda: Metall. Trans. A, 1977, vol. 8A, pp. 567–75.10.1007/BF02676977 ↗
12. M.A. Dayananda and C.L. Liu: in Fundamentals and Applications of Ternary Diffusion, G.R. Purdy, ed., Pergamon Press, New York, NY, 1990, pp. 91–100.10.1016/B978-0-08-040412-7.50015-3 ↗
13. G.H. Cheng and M.A. Dayananda: Metall. Trans. A, 1979, vol. 10A, pp. 1407–14.10.1007/BF02812004 ↗
14. M.A. Dayananda, D.A. Behnke, and L.M. McCaslin: in Diffusion Analysis and Applications, A.D. Romig, Jr., ed., TMS, Warrendale, PA, 1989, pp. 325–36.
15. J.A. Nesbitt and R.W. Heckel: Metall. Trans. A, 1987, vol. 18A, pp. 2061–73.10.1007/BF02647078 ↗
16. H.C. Akuezue and J. Stringer: in Diffusion Analysis and Applications, A.D. Romig, Jr., ed., TMS, Warrendale, PA, 1989, pp. 337–52.
17. J. Stringer and H.C. Akuezue: in Fundamentals and Applications of Ternary Diffusion, G.R. Purdy, ed., Pergamon Press, New York, NY, 1990, pp. 69–80.10.1016/B978-0-08-040412-7.50013-X ↗
18. D.E. Coates and J.S. Kirkaldy: Trans. ASM, 1969, vol. 62, pp. 426–36.
19. J.E. Morral, C. Jin, A. Engstrom, and J. Agren: Scripta Mater., 1996, vol. 34, pp. 1661–67.10.1016/1359-6462(96)00038-3 ↗
20. P. Maugis, W.D. Hopfe, J.E. Morral, and J.S. Kirkaldy: Acta Mater., 1997, vol. 45, pp. 1941–54.10.1016/S1359-6454(96)00321-7 ↗
21. W.D. Hopfe and J.E. Morral: Acta Metall. Mater., 1994, vol. 43, pp. 3887–94.10.1016/0956-7151(94)90454-5 ↗
22. G.W. Roper and D.P. Whittle: Met. Sci., 1981, vol. 15, pp. 148–53.10.1179/030634581790426723 ↗
23. C. Chen and J.E. Morral: Acta Mater., 1999, vol. 47, pp. 1175–80.10.1016/S1359-6454(99)00004-X ↗
24. J.E. Moral, C. Jin, A. Engstrom, and J. Agren: Scripta Mater., 1996, vol. 34, pp. 1661–66.10.1016/1359-6462(96)00038-3 ↗
25. W.J. Boettinger, S.R. Coriell, C.E. Campbell, and G.B. McFadden: Acta Mater., 2000, vol. 48, pp. 481–92.10.1016/S1359-6454(99)00357-2 ↗
26. I. Barker, R.D. Noebe, and E.P. George: Interstials and Substitutional Solute Effects in Intermetallics, TMS, Warrendale, PA, 1998.
27. C.T. Liu and K.S. Kumar: J. Met., 1993, vol. 45, pp. 38–44.
28. E.P. George, M. Yamaguchi, K.S. Kumar, and C.T. Liu: Ann. Rev. Mater. Sci., 1994, vol. 24, pp. 409–51.10.1146/annurev.matsci.24.1.409 ↗
29. A. Steiner and K.L. Komarek: Trans. TMS-AIME, 1964, vol. 230, pp. 786–90.
30. T.D. Moyer and M.A. Dayananda: Metall. Trans. A, 1976, vol. 7A, pp. 1035–40.10.1007/BF02644070 ↗
31. G.H. Cheng and M.A. Dayananda: Metall. Trans. A, 1979, vol. 10A, pp. 1415–19.10.1007/BF02812005 ↗
32. Y.H. Sohn and M.A. Dayananda: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3375–92.10.1007/s11661-002-0326-8 ↗
33. Y.H. Sohn and M.A. Dayananda: Acta Mater., 2000, vol. 48, pp. 1427–33.10.1016/S1359-6454(99)00454-1 ↗
34. Y.H. Sohn and M.A. Dayananda: Scripta Mater., 1999, vol. 40, pp. 79–84.10.1016/S1359-6462(98)00391-1 ↗
35. M.A. Dayananda and C.W. Kim: Metall. Trans. A, 1979, vol. 10A, pp. 1333–39.10.1007/BF02811989 ↗
36. C.W. Kim and M.A. Dayananda: Metall. Trans. A, 1983, vol. 14A, pp. 857–64.10.1007/BF02644288 ↗
37. M.A. Dayananda: Metall. Trans. A, 1983, vol. 14A, pp. 1851–58.10.1007/BF02645555 ↗
38. M.A. Dayananda: Mater. Sci. Eng. A, 1989, vol. A121, pp. 351–59.10.1016/0921-5093(89)90787-9 ↗
39. M.A. Dayananda: Ordered Intermetallics—Physical Metallurgy and Mechanical Behavior, C.T. Liu, R.W. Cahn, and G. Sauthoff, ed., Kluwer Academic Publisher, 1992, pp. 465–84.10.1007/978-94-011-2534-5_29 ↗
40. M.A. Dayananda and D.A. Behnke: Scripta Metall., 1991, vol. 25, pp. 2187–91.10.1016/0956-716X(91)90297-E ↗
41. M.A. Dayananda: Def. Diff. Forum, 1993, vols. 95–98, pp. 521–35.10.4028/www.scientific.net/DDF.95-98.521 ↗
42. M.A. Dayananda: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2504–09.10.1007/BF02652344 ↗
43. M.A. Dayananda and Y.H. Sohn: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 535–43.10.1007/s11661-999-0045-5 ↗
44. Y.H. Sohn, M.A. Dayananda, G.L. Hofman, R.V. Stain, and S.L. Hayes: J. Nucl. Mater., 2000, vol. 279, pp. 317–29.10.1016/S0022-3115(99)00290-1 ↗
45. Y.S. Kim, G.L. Hofman, S.L. Hayes, and Y.H. Sohn: J. Nucl. Mater., 2004, vol. 327, pp. 27–36.10.1016/j.jnucmat.2004.01.012 ↗
46. Ann L. Oasager: NY Acad. Sci., 1965, vol. 56, pp. 241–65.
47. Y.H. Sohn: Ph.D. Dissertation, Purdue University, West Lafayette, IN, 1998.
48. S.M. Hao, T. Takayama, K. Ishida, and T. Nishizawa: Metall. Trans. A, 1984, vol. 15A, pp. 1819–28.10.1007/BF02664895 ↗