journal article·2002-08

Interfacial reactions in aluminosilicate short fiber-reinforced aluminum matrix composites

T. P. D. Rajan, R. M. Pillai, B. C. Pai

Publisher page

Abstract

Aluminosilicate short fibers are one of the less expensive reinforcements used for the fabrication of metal matrix composites (MMCs). The present investigation evaluates the interfacial characteristics of Al-7Si-0.4Mg (356) alloy reinforced with 10 wt pct aluminosilicate short fibers using optical microscopy, electron microscopy, and X-ray analysis. The fibers used are standard- and zirconiagrade aluminosilicate short fibers. The interfacial analysis has shown the formation of MgAl2O4 and Si in both grades of fibers. In addition, ZrAl3 formation is observed in the zirconia-grade fiber because of the interaction between the matrix and the dispersoid. The zirconia-grade fiber is more susceptible to interfacial reaction than the standard-grade fiber because of the presence of the highly reactive ZrO2 phase and a lower amount of the Al2O3 phase, which provides resistance to the reaction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. S. Ciby, B.C. Pai, K.G. Satynarayana, V.K. Vaidyan, and P.K. Rohatgi: J. Mater. Eng. Performance, 1992, vol. 2, pp. 353–58.10.1007/BF02648822 ↗
2. F. Fogar: AFS Trans., 1988, pp. 395–402.10.2208/jscej.1988.392_395 ↗
3. S.H.J. Lo, S. Dionne, M. Sahoo, and H.M. Hawthorne: J. Mater. Sci., 1992, vol. 27, pp. 5681–91.10.1007/BF01119723 ↗
4. S. Dermarkar: Met. Mater., 1986, vol. 2, pp. 144–46.
5. Anon: Auto. Eng., 1986, vol. 94, pp. 61–65.10.1111/j.1469-185X.1986.tb00428.x ↗
6. S.O. Lasday: Ind. Heat., 1987, vol. 54, pp. 20–21.
7. S.V. Prasad and K.R. Mecklenburg: Wear, 1993, vol. 162, pp. 47–56.10.1016/0043-1648(93)90483-3 ↗
8. S. Canumalla, S.A. Dynan, D.J. Green, R.B. Bhagat, and R.N. Panborn: J. Compos. Mater., 1995, vol. 29, pp. 653–70.10.1177/002199839502900506 ↗
9. J.C. Lee, G.H. Kim, and H.I. Lee: Mater. Sci. Technol, 1997, vol. 13, pp. 182–86.10.1179/026708397790302449 ↗
10. W.M. Zhong, G.L. Esperance, and M. Suery: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2625–34.10.1007/BF02669420 ↗
11. William J. Baxter and Anil K. Sachdev: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 815–24.10.1007/s11661-999-0074-0 ↗
12. J.A. Isaacs, F. Taricco, V.J. Michaud, and A. Mortenson: Metall. Trans. A, 1991, vol. 22A, pp. 2855–62.10.1007/BF02650246 ↗
13. T. Lebeau, J.O. Stromolson, J.E. Gruzleski, and R.A.L. Drew: Mater. Characterization, 1995, vol. 35, pp. 11–22.10.1016/1044-5803(95)00064-X ↗
14. MMTCL Ceramic Fibre-Thermal Ceramics Products Leaflet-Murugappa, Morgan Thermal Ceramics Ltd., Chennai, 1997.
15. T.P.D. Rajan, R.M. Pillai, and B.C. Pai: J. Mater. Sci. Lett., 1999, vol. 18, pp. 1683–86.10.1023/A:1006625732351 ↗
16. MTDATA Software, National Physical Laboratory, Teddington, Middlesex, United Kingdom, 2001.
17. H. Ribes and M. Suery: Scripta Metall., 1989, vol. 23, pp. 705–09.10.1016/0036-9748(89)90516-4 ↗
18. H. Ribes, R. Da Silva, M. Suery, and T. Bretheau: Mater. Sci. Technol., 1990, vol. 6, pp. 621–28.10.1179/mst.1990.6.7.621 ↗
19. A. Banerji and P.K. Rohatgi: J. Mater. Sci., 1982, vol. 17 (2), pp. 335–42.10.1007/BF00591467 ↗
20. A.D. Mcleod and C.M. Gabriel: Metall. Trans. A, 1992, vol. 23A, pp. 1279–83.10.1007/BF02665059 ↗
21. L.F. Mondolfo: Aluminium Alloys: Structures and Properties, 1st ed., Butterworth and Co., London, 1976.