journal article·2007-01

Microsegregation during Solidification of Graphitic Fiber-Reinforced Aluminum Alloys under External Heat Sinks

H.G. Seong, H.F. Lopez, P.K. Rohatgi

Publisher page

Abstract

Squeeze casting and melt infiltration were employed in processing continuous graphitic fiber-reinforced aluminum matrix composites. The fiber reinforcements were (1) uncoated carbon fiber (UNC-CF), (2) Ni-coated carbon fiber (NiC-CF), and (3) bare graphite fibers (GRFs), and they were externally cooled to enhance the local solidification of the matrix alloy. The solidified microstructures and their composition profiles were examined using optical microscopy, scanning electron microscopy–energy-dispersive X-ray, and electron probe microanalysis–wavelengh-dispersive X-ray. The resultant microstructures in the UNC-CF and NiC-CF–reinforced composites exhibited significant differences from those found in the GRF-reinforced composite, in terms of solidified morphologies and compositions. It was found that coarse columnar dendrites developed in the fiber-free matrix, fine equiaxed dendrites in the chilled matrix, and columnar-like arms in the fiber-reinforced matrices. In contrast, in bare GRF-reinforced composites, two distinct regions were clearly distinguished: (1) a region consisting of coarse equiaxed dendrites in the fiber-free matrix and (2) a featureless morphology within the fiber reinforcement regions. These distinct microstructures were attributed to preferential heat extraction through the GRFs, which possess a relatively high thermal conductivity. Apparently, heat extraction through the GRFs led to the formation of single α-Al envelopes on the fiber surfaces. In addition, the extent of solute segregation found in the GRF-reinforced alloy composite was relatively small when compared with the CF-reinforced alloy composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Martorano M.A., Capocchi J.D.T. (2000) Metall Mater Trans A 31A:3137–4810.1007/s11661-000-0093-3 ↗
2. Bower T.F., Brody H.D., Flemings M.C. (1966) Trans. AIME 236:624–36
3. Yan X.-Y., Chang Y.A., Xie F.-Y., Chen S.-L., Zhang F., Daniel S. (2001) J Alloys Compounds 320:151–6010.1016/S0925-8388(00)01469-9 ↗
4. Yan X., Chen S., Xie F., Chang Y.A. (2002) Acta Metall 50:2199–2207
5. Gungor M.N. (1989) Metall Trans A 20A:2529–3310.1007/BF02666687 ↗
6. Liu H.-N., Ogi K., Miyahar H. (1998) J Mater Sci 33:3615–2210.1023/A:1004607413182 ↗
7. Mortensen A., Flemings M.C. (1996) Metall Mater Trans A 27A:595–60910.1007/BF02648949 ↗
8. Le Petitcorps Y., Quenisset J.M., Le Borgne G., Barthole M. (1991) J Mater Sci Eng A 135(1–2):37–4010.1016/0921-5093(91)90533-S ↗
9. Koseki T., Flemings M.C. (1995) Iron Steel Inst Jpn Int 35(6):611–1710.2355/isijinternational.35.611 ↗
10. Fras E., Lopez H.F. (2000) Int J Cast Met Res 12:283–9210.1080/13640461.2000.11819365 ↗
11. Flemings M.C. (1974) Solidification Processing. McGraw-Hill, New York, NY, p. 60
12. Clyne T.W. (2000) Comprehensive Composite Materials. In Clyne T.W. (Ed) MMCs. vol. 3, Elsevier, New York, NY, pp. 447–68
13. Das A., Fan Z. 2004 Mater Sci Eng A A365:330–3510.1016/j.msea.2003.09.043 ↗
14. Sekhar J.A., Trivedi R. (1989) Mater Sci Eng A114:133–4610.1016/0921-5093(89)90852-6 ↗
15. R. Trivedi, S.H. Han, and J.A. Sekhar: Conf. on Solidification of Metal Matrix Composites, P.K. Rohatgi, ed., TMS, Warrendale, PA, 1990, pp. 23–27
16. Mortensen A., Masur L.J., Cornie J.A., Flemings M.C. (1989) Metall Trans A 20A:2535–4710.1007/BF02666688 ↗
17. Mortensen A., Michaud V. (1990) Metall Trans A 21A:2059–7210.1007/BF02647253 ↗
18. Asthana R. (1998) J Mater Sci 33:1679–9810.1023/A:1004308027679 ↗
19. Miyahara H., Ogi K. (2001) Mater Trans 42(2):258–6210.2320/matertrans.42.258 ↗
20. Miyahara H., Ogi K. (2001) Mater Trans 42(2):252–5710.2320/matertrans.42.252 ↗
21. Mortensen A., Cornie J.A., Flemings M.C. (1988) Metall Trans A 19A:709–2110.1007/BF02649285 ↗
22. Li Q.F., McCartney D.G., Walker A.M. (1991) J Mater Sci 26:3565–7410.1007/BF00557145 ↗
23. Kaplan W.D. (1998) Acta Mater 46(7):2369–7910.1016/S1359-6454(97)00393-5 ↗
24. Qiu C., Metselaar R. (1994) J Alloys Compounds 216:55–6010.1016/0925-8388(94)91042-1 ↗
25. Wu F., Zhu J. (1997) Comp Sci Technol 57:661–6710.1016/S0266-3538(97)00020-1 ↗