Synthesis and Characterization of Chromate Conversion Coatings on GALVALUME and Galvanized Steel Substrates
Source abstract
Abstract
The morphology, composition, and corrosion performance of chromate conversion coatings (CCCs) formed on GALVALUME (Fe-Al-Zn) and galvanized steel (Fe-Zn) samples have been studied, and different immersion times (0, 10, 30, and 60 seconds) have been compared. The coated surfaces were analyzed using light microscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and electrochemical measurements in a NaCl solution (3 wt pct). The electrochemical measurements were carried out using the polarization resistance, Tafel, and ac impedance methods. A nonuniform growth of the CCCs having a porous morphology and cracks that appear extended to the base metal was observed. The XRD patterns show that the coatings mainly consist of CrO3, Cr2O3, and traces of Cr2O 7 −2 . The electrochemical results show that GALVALUME presents a better behavior than that of the galvanized steel alloys at each dipping time. The SEM micrographs show that the galvanized steel treatments resulted in the formation of a more uniform film, but their protection barrier broke down faster than that of the GALVALUME samples in contact with the aggressive media. The samples that underwent the lowest degree of dissolution were those with a dipping time of 30 seconds. The difference in the corrosion protection given by the two substrate types could be attributed to the structural properties, grain size, composition, and roughness, which affect oxygen diffusion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Electrodeposition and Electroless Coatings · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. L.F.G. Williams: Corr. Sci., 1973, vol. 13, pp. 865–68.10.1016/S0010-938X(73)80068-X ↗
2. K.A. Korinek: Metals Handbook, 9th ed., Corrosion, ASM INTERNATIOAL, Metals Park, OH, 1987, vol. 13, pp. 389–95.
3. P.L. Hagans and C.M. Haas: Surface Engineering, 10th ed., ASM Handbook, ASM INTERNATIOAL, Materials Park, OH, 1994, vol. 5, p. 405.10.31399/asm.hb.v05.a0001275 ↗
4. G.D. Wilcox and J.A. Wharton: J. Trans. IMF, 1997, vol. 75, pp. B140–42.10.1080/00202967.1997.11871160 ↗
5. F.J. Frelin, T.L. Kelly, and A.J. Malloy: U.S. Patent 4,313,769, Amchem Products Inc., India, 1980.
6. L. Fedrizzi, F. Deflorian, S. Rossi, L. Fambri, and P.L. Bonora: Progr. Organic Coat., 2001, vol. 42, pp. 65–74.10.1016/S0300-9440(01)00153-9 ↗
7. L. Guangyu, L. Yuan Niu, L. Jianshe, and J. Zhonghao: Surf. Coat. Technol., 2004, vol. 176, pp. 215–21.10.1016/S0257-8972(03)00736-9 ↗
8. J.A. Treverton, A. Bosland, and J.M. Brown: Corr. Sci., 1990, vol. 30, pp. 1159-65.10.1016/0010-938X(90)90197-D ↗
9. F. Mansfeld, S. Lin, S. Kim, and H. Shih: Electrochim. Acta, 1989, vol. 34, pp. 1123–32.10.1016/0013-4686(89)87145-2 ↗
10. D.V. Andreva and D.G. Shchukin: Mater. Today, 2008, vol. 11, pp. 24–30.10.1016/S1369-7021(08)70204-9 ↗
11. F.W. Eppensteiner and M.R. Jenkins: Met. Finish., 2002, vol. 100, Suppl., pp. 179–491.10.1016/S0026-0576(02)82051-7 ↗
12. G. Lu, E. Ada, and G. Zangari: Electrochim. Acta, 2004, vol. 49, pp. 1461–73.10.1016/S0013-4686(03)00928-9 ↗
13. H. Kendig and S. Jean Jaquet: J. Electrochem. Soc., 2002, vol. 149, pp. B47–B51.10.1149/1.1430717 ↗
14. G.O. Ilevbare and J.R.J. Scully: J. Electrochem. Soc., 2000, vol. 148, pp. B196–B207.10.1149/1.1360206 ↗
15. P. Campestrini, G. Goeminne, H. Terryn, J. Verecken, J.H.W. De Wit: J. Electrochem. Soc., 2004, vol. 151, pp. B59–B70.10.1149/1.1637355 ↗
16. G.M. Brown, K. Shimizu, K. Kobayashi, G.E. Thompson, and G.C. Wood: Corr. Sci., 1993, vol. 34, pp. 1045–54.10.1016/0010-938X(93)90288-R ↗
17. J.A. Treverton and M.P. Amor: Appl. Surf. Sci., 1986, vol. 25, pp. 183–94.10.1016/0169-4332(86)90036-X ↗
18. J.A. Treverton and N.C. Davies: Electrochim. Acta, 1980, vol. 25, pp. 1571–76.10.1016/0013-4686(80)80006-5 ↗
19. G. Goeminne, C. Wagemans, J. Wagemans, O. Serot, M. Loiselet, and M. Gaelens: Nucl. Phys. A, 2000, vol. 678, pp. 11–23.10.1016/S0375-9474(00)00312-2 ↗
20. P. Campestrini, S. Böhm, T. Schram, H. Terryn, and J.H.W. De Wit: Thin Solid Films, 2002, vol. 410, pp. 76–85.10.1016/S0040-6090(02)00253-5 ↗
21. E.J. Wilhelm: U.S. Patent. 2,035,380, New Jersey Zinc Co., 1936.
22. D.A. Jones: Principles and Prevention of Corrosion, MacMillan Publishing Company, New York, NY, 1992, pp. 457–70.
23. H.H. Uhlig: The Corrosion Handbook, 2nd ed., John Wiley & Sons, Inc., New York, NY, 2000, pp. 1169–78.
24. S. Guessasma, O. Elkedim, P. Nardin, R. Hamzaoui, and T. Grosdidier: Corr. Sci., 2007, vol. 49, pp. 2880–2904.10.1016/j.corsci.2006.10.041 ↗
25. X.G. Zhang: Corrosion and Electrochemistry of Zinc, Plenum Press, New York, NY, 1996.10.1007/978-1-4757-9877-7 ↗
26. A.M. Rocco, T.M.C. Nogueira, R.A. Simao, and W.C. Lima: Surf. Coat. Technol., 2004, vol. 179, pp. 135–44.10.1016/S0257-8972(03)00847-8 ↗
27. H.J. Cleary: 16th Annual Technical Meeting of the International Metallographic Society, Alberta, Canada, July 1983.
28. A. Pfennig and B. Fedelich: Corr. Sci., 2008, vol. 50, pp. 2484–92.10.1016/j.corsci.2008.06.033 ↗
29. H. Asgari, M.R. Toroghinejad, and M.A. Golozar: Appl. Surf. Sci., 2007, vol. 253, pp. 6769–77.10.1016/j.apsusc.2007.01.093 ↗
30. J.C. Scully: The Fundamentals of Corrosion, Pergamon Press, Oxford, NY, 1990.
31. S. Chang and J.C. Shin: Corr. Sci., 1994, vol. 8 pp. 1425–36.10.1016/0010-938X(94)90190-2 ↗
32. Z.L. Long, Y.C. Zhou, and L. Xiao: Appl. Surf. Sci., 2003, vol. 218, pp. 123–36.10.1016/S0169-4332(03)00572-5 ↗
33. O. Lunder, J.C. Walmsley, P. Mack, and K. Nisacioglu: Corr. Sci., 2005, vol. 47, pp. 1604–24.10.1016/j.corsci.2004.08.012 ↗
34. N.M. Martyak, J.E. McCaskie, and L. Harrision: Met. Finish., 1996, vol. 94, pp. 65–67.10.1016/S0026-0576(96)93872-6 ↗
35. N.M. Martyak: Surf. Coat. Technol., 1997, vol. 88, pp. 139–46.10.1016/S0257-8972(96)02927-1 ↗
36. X. Zhang, W.G. Sloof, A. Hovestad, E.P.M. Van Westing, H. Terryn, and J.H.W. De Wit: Surf. Coat. Technol., 2005, vol. 197, pp. 168–76.10.1016/j.surfcoat.2004.08.196 ↗
37. T. Schram, J. De Laet, and H. Terryn: Thin Solid Films, 1998, vol. 727, pp. 313–17.
38. A.P. Yadav, H. Katayama, K. Noda, H. Masuda, A. Nishikata, and T. Tsuru: Corr. Sci., 2007, vol. 49, pp. 3716–31.10.1016/j.corsci.2007.03.039 ↗
39. L. Forget, J. Delhalle, and Z. Mekhalif: Mater. Corros., 2001, vol. 52, pp. 181–84.10.1002/1521-4176(200103)52:3<181::AID-MACO181>3.0.CO;2-3 ↗
40. S. Turgoose: Chemical Inhibitors for Corrosion Control, The Royal Society of Chemistry, Manchester, UK, 1990.
41. D.C.H. Nevison: Corrosion, 9th ed., Metals Handbook, ASM INTERNATIONAL, Metals Park, OH, 1987, vol. 13, p. 755.
42. H. Dafydd, D.A. Worsley, and H.N. McMurray: Corr. Sci., 2005, vol. 47, pp. 3006-18.10.1016/j.corsci.2005.05.036 ↗
43. L. Sziraki, A. Cziraki, Z. Vertesy, L. Kiss, V. Ivanova, G. Raichevski, S. Vitkova, S, and Ts. Marinova: J. Appl. Electrochem.., 1999, vol. 29, pp. 927–37.10.1023/A:1003584420237 ↗