journal article·2011-07

A Finite Element Modeling for Dilatometric Nonisotropy in Steel

Yi-Gil Cho, Young-Roc Im, Jae Kon Lee, Dong-Woo Suh, Sung-Joon Kim, Heung Nam Han

Publisher page

Abstract

It is well known that nonisotropic volume changes in dilatometry were observed during the phase transformation in steel. In this study, a finite element (FE) model incorporating the transformation plasticity was adopted to describe the nonisotropic dilatometric behavior during the phase transformation in steel. An implicit numerical solution procedure to calculate the deformation during the dilatometric experiment was incorporated into the general purpose implicit FE program. The nonisotropic dilatometric behavior could be successfully reproduced by using the FE simulation considering the transformation plasticity. The transformation plasticity was caused by the small amount of stress that naturally developed in the specimen during the dilatometric experiment. In conventional low carbon steel, the stress in the specimen mainly forms due to the very small external force supplied to support it during the dilatometric experiment. As regards ultralow carbon steel, whose phase transformation occurs within an extraordinarily narrow temperature range, the inhomogeneous phase transformation due to the temperature deviation in the specimen was mainly responsible for the stress field in the specimen during the dilatometric experiment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. M. Takahashi and H.K.D.H. Bhadeshia: J. Mater. Sci. Lett., 1989, vol. 8, pp. 477–78.10.1007/BF00720712 ↗
2. C. García de Andrés, F.G. Caballero, and C. Capdevila: Scripta Mater., 1998, vol 38, pp. 1835–42.10.1016/S1359-6462(98)00131-6 ↗
3. C.-S. Oh, H.N. Han, C.G. Lee, T.-H. Lee, and S.-J. Kim: Met. Mater. Int., 2004, vol. 10, pp. 399–406.10.1007/BF03027339 ↗
4. ASTM STP A 1033-04, ASTM International, ASTM, Philadelphia, PA.
5. T.A. Kop, J. Sietsma, and S. van der Zwaag: J. Mater. Sci., 2001, vol. 36, pp. 519–26.10.1023/A:1004805402404 ↗
6. H.N. Han, J.K. Lee, S.-H. Park, and K.J. Lee: J. Kor. Inst. Met. Mater., 2000, vol. 38, pp. 409–13 (in Korean).
7. S. Choi: Mater. Sci. Eng. A, 2003, vol. 363, pp. 72–80.10.1016/S0921-5093(03)00587-2 ↗
8. L. Zhao, T.A. Kop, V. Rolin, J. Sietsma, A. Mertens, P.J. Jacques, and S. van der Zwaag: J. Mater. Sci., 2002, vol. 37, pp. 1585–91.10.1023/A:1014941424093 ↗
9. S.J. Lee, M.T. Lusk, and Y.K. Lee: Acta Mater., 2007, vol. 55, pp. 875–82.10.1016/j.actamat.2006.09.008 ↗
10. D.-W. Suh, C.-S. Oh, H.N. Han, and S.-J. Kim: Acta Mater., 2007, vol. 55, pp. 2659–69.10.1016/j.actamat.2006.12.007 ↗
11. D.-W. Suh, C.-S. Oh, H.N. Han, and S.-J. Kim: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2963–73.10.1007/s11661-007-9361-9 ↗
12. R. Kennedy, A.I. Grant, A.J. Kinnear, and I.M. Kirkpatrick: J. Iron Steel Inst., 1970, pp. 601–02.
13. A. Goldberg: Trans. ASM , 1968, vol. 61, pp. 26–36
14. R.A. Jaramillo, M.T. Lusk, and M.C. Mataya: Acta Mater., 2004, vol. 52, pp. 851–58.10.1016/j.actamat.2003.11.017 ↗
15. R.A. Jaramillo and M.T. Lusk: Acta Mater., 2004, vol. 52, pp. 859–63.10.1016/j.actamat.2003.10.020 ↗
16. G.W. Greenwood and R.H. Johnson: Proc. R. Soc. A (London), 1965 vol. 283, pp. 403–22.10.1098/rspa.1965.0029 ↗
17. E. Gautier, A. Simon, and G. Beck: Acta Metall., 1987, vol. 35, pp. 1367–75.10.1016/0001-6160(87)90019-8 ↗
18. J.B. Leblond, J. Devaux, and J.C. Devaux: Int. J. Plast., 1989, vol. 5, pp. 551–72.10.1016/0749-6419(89)90001-6 ↗
19. P. Zwigl and D.C. Dunand: Acta Mater., 1997, vol. 45, pp. 5285–94.10.1016/S1359-6454(97)00186-9 ↗
20. H.N. Han and J.K. Lee: ISIJ Int., 2002, vol. 42, pp. 200–05.10.2355/isijinternational.42.200 ↗
21. H.N. Han and D.-W. Suh: Acta Mater., 2003, vol. 51, pp. 4907–17.10.1016/S1359-6454(03)00333-1 ↗
22. H.N. Han, C.G. Lee, S.-J. Kim, C.-S. Oh, and T.-H. Lee: Acta Mater., 2004, vol. 52, pp. 5203–14.10.1016/j.actamat.2004.07.031 ↗
23. H.N. Han, J.K. Lee, D.-W. Suh, and S.-J. Kim: Philos. Mag., 2007, vol. 87, pp. 159–76.10.1080/14786430600953731 ↗
24. W.A. Johnson and R.F. Mehl: Trans. AIME, 1937, vol. 135, pp. 416–58.
25. M. Avrami: J. Chem. Phys., 1940, vol. 8, pp. 212–24.10.1063/1.1750631 ↗
26. P. Kruger: J. Phys. Chem. Solids, 1993, vol. 54, pp. 1549–55.10.1016/0022-3697(93)90349-V ↗
27. W. Zhang, J.W. Elmer, and T. DebRoy: Scripta Meter., 2002, vol. 46, pp. 753–57.10.1016/S1359-6462(02)00040-4 ↗
28. H.N. Han and J.K. Lee: J. Kor. Inst. Met. Mater., 2003, vol. 41, pp. 273–78 (in Korean).
29. J. Ågren: Acta Matall., 1982, vol. 30, pp. 841–51.10.1016/0001-6160(82)90082-7 ↗
30. J. Ågren: Scripta Metall., 1986, vol. 20, pp. 1507–10.10.1016/0036-9748(86)90384-4 ↗
31. H.N. Han and S.-H. Park: Mater. Sci. Technol., 2001, vol. 17, pp. 721–26.10.1179/026708301101510447 ↗
32. K.J. Lee, J.K. Lee, K.B. Kang, and O. Kwon: ISIJ Int., 1992, vol. 32 (3), pp. 326–35.10.2355/isijinternational.32.326 ↗
33. B.J. Lee and D.N. Lee: CALPHAD, 1989, vol. 13, pp. 355–65.10.1016/0364-5916(89)90025-4 ↗
34. W. Huang: Metall. Trans. A, 1990, vol. 21A, pp. 2115–23.10.1007/BF02647870 ↗
35. ABAQUS, User's Manual for Version 6.7, SIMULIA Inc., Providence, RI, 2007.
36. J. Miettinen: Report No. TKK-V-B113, Helsinki University of Technology, Helsinki, Finland, 1995.
37. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps, The Plasticity and Creep of Metals and Ceramics, Pergamon Press, New York, NY, 1982, p. 21.
38. H.N. Han, S.J. Kim, M. Kim, G. Kim, D.-W. Suh, and S.-J. Kim: Philos. Mag., 2008, vol. 88, pp. 1811–24.10.1080/14786430802320119 ↗
39. J.L. Kuester and J.H. Mize: Optimization Techniques with Fortran, McGraw-Hill, New York, NY, 1973, pp. 386–98.
40. R.G. Stringfellow, D.M. Parks, and G.B. Olson: Acta Metall. Mater., 1992, vol. 40, pp. 1703–16.10.1016/0956-7151(92)90114-T ↗
41. J.D. Eshelby: Proc. R. Soc. London Ser. A, 1957, vol. 241, pp. 376–96.10.1098/rspa.1957.0133 ↗
42. P.J. Wray: Modeling of Casting and Welding Processes, H.D. Brody and D. Apelian, eds., AIME, Warrendale, PA, 1980, pp. 245–57.
43. M.N. Özisik: Heat Transfer: A Basic Approach, McGraw-Hill, Inc., Singapore, 1985, p. 67.
44. V. Rudnev, D. Loveless, R. Cook, and M. Black: Handbook of Induction Heating, Marcel Dekker Inc., New York, NY, 2003, p. 109.10.1201/9781420028904 ↗
45. J.V. Beck: Int. J. Heat Mass Transfer, 1970, vol. 13, pp. 703–16.10.1016/0017-9310(70)90044-X ↗
46. H. Suzuki, S. Hashizume, Y. Yabuki, Y. Ichihara, S. Nakajima, and K. Kenmochi: “Studies of the Stress of Metals and Alloys,” Report of the Institute of Industrial Science, University of Tokyo, Tokyo, 1968, pp. 26–35.